Dynamic simulation of a tilting-disc valve with clearance in pulsatile channel flow

Abstract  

In this study, a fully coupled fluid–structure interaction (FSI) software system for a pulsatile flow across a moving tilting-disc valve with clearance is developed. Unsteady pulsatile flow coupled with induced valve motion has been examined in details. State-of-the-art computational fluid dynamics (CFD) methods are adopted in the present flow solver development. To account for nonstationary valve motion, the meshes surrounding the valve are generated and updated in each time-marching step using hybrid grid method. A single-degree-of-freedom rotational valve model is integrated simultaneously with the CFD adaptive time-stepping. It is found in the present study that, on both side of the occluder, strong shedding vortices occur and persist in the valve closing phase. These closure vortices show great influence on the prediction of the regurgitate flow characteristics and the subsequent valve opening dynamics as well. Based on the present software system, the results obtained from quasi-steady simulations performed at various instants of interest with prescribed valve motion are critically evaluated to assess whether simplified flow and valve conditions may lead to erroneous conclusions.     

The effect of differently sized Ag catalysts on the fabrication of a silicon nanowire array using Ag-assisted electroless etching

A simple and low cost method to generate single-crystalline, well-aligned silicon nanowires (SiNWs) of large area, using Ag-assisted electroless etching, is presented and the effect of differently sized Ag catalysts on the fabrication of SiNWs arrays is investigated. The experimental results show that the size of the Ag catalysts can be controlled by adjusting the pre-deposition time in the AgNO₃/HF solution. The optimum pre-deposition time for the fabrication of a SiNWs array is 3 min (about 162.04 ± 38.53 nm Ag catalyst size). Ag catalysts with smaller sizes were formed in a shorter pre-deposition time (0.5 min), which induced the formation of silicon holes. In contrast, a large amount of Ag dendrites were formed on the silicon substrate, after a longer pre-deposition time (4 min). The existence of these Ag dendrites is disadvantageous to the fabrication of SiNWs. Therefore, a proper pre-deposition time for the Ag catalyst is beneficial to the formation of SiNWs.SiNWs were synthesized in the H₂O₂/HF solution system for different periods of time, using Ag-assisted electroless etching (pre-deposition of the Ag catalyst for 3 min). The length of the SiNWs increases linearly with immersion time. From TEM, SAED and HRTEM analysis, the axial orientation of the SiNWs is identified to be along the [001] direction, which is the same as that of the initial Si wafer. The use of HF may induce Si–H_x bonds onto the SiNW array surface. Overall, the Ag-assisted electroless etching technique has advantages, such as low temperature, operation without the need for high energy and the lack of a need for catalysts or dopants.     

Room-temperature flexible thin film transistor with high mobility

We report a room-temperature and high-mobility InGaZnO thin-film transistor on flexible substrate. To gain both high gate capacitance and low leakage current, we adopt stacked dielectric of Y₂O₃/TiO₂/Y₂O₃. This flexible IGZO TFT shows a low threshold voltage of 0.45 V, a small sub-threshold swing of 0.16 V/decade and very high field-effect mobility of 40 cm²/V. Such good performance is mainly contributed by improved gate stack structure and thickness modulation of IGZO channel that reduce the interface trap density without apparent mobility degradation.     

Efficient and rapid accuracy estimation of the Earth’s gravitational field from next-generation GOCE Follow-On by the analytical method

Firstly, a new analytical error model of the cumulative geoid height using the three-dimensional diagonal tensors of satellite gravity gradiometry (SGG) is introduced based on the variance-covariance matrix principle. Secondly, a study for the requirements demonstration on the next-generation GOCE Follow-On satellite gravity gradiometry system is developed using different satellite orbital altitudes and measurement accuracies of satellite gravity gradiometer by the new analytical error model of SGG. The research results show that it is preferable to design satellite orbital altitudes of 300 km-400km and choose the measurement accuracies of 10-13/s2 -10-15/s2 from satellite gravity gradiometer. Finally, the complementarity of the four-stage satellite gravity missions, including past CHAMP, current GRACE, and GOCE, and next-generation GOCE Follow-On, is contrastively demonstrated for precisely recovering the Earth’s full-frequency gravitational field with high spatial resolution.     

Calculation of local insulating structure of CaCuO2 with interplanar oxygen defects

The electronic band structures of CaCuO₂ with various planar structures have been computed with the spin polarized, full potential pseudofunction method. The perfect tetragonal structure has metallic bands. If the CuO plane is puckered as proposed on the basis of pulsed neutron experiments, a semi-metallic-like behavior is found. When some of the oxygen atoms are moved from the basal plane into interplanar sites that are coplanar with Ca, an insulating ground state is obtained with antiferromagnetic moments of 0.21 _B . Around this interplanar oxygen defect site, the charge and magnetic moment distributions resemble those of a CuO chain structure with strong coupling to Cu atoms from different basal planes. Small displacements of defect oxygens at interplanar sites along the CaO planar directions produces large changes in band shape near E _F , suggesting strong electron-lattice coupling. The coupling is much weaker for displacements of O atoms within the CuO basal plane. Such interplanar defects could occur in superconducting cuprates and thus create small insulating regions for the pinning of magnetic flux lines.     

A Polarization-Stabilized Fiber-Optical Output Infrared Laser Source

In this paper, we successfully invented a polarization controlled light source for coherent or noncoherent fiber communication systems. The structure of our experiment includes 89C51 control board and feedback circuit which can stabilize states of polarization (SOPs) of output light. From the SOP modulation results, the given degree of polarization can be effectively controlled and the polarization state can be arbitrarily changed.