Lens alpha-crystallin and hypericin: a photophysical mechanism explains observed lens

Determining whether alpha-crystallin (the major lens protein) affects the photophysics of hypericin, a photosensitizing agent found in various plants, such as St. John's Wort, is important. Hypericin shows promise in cancer and human immunodeficiency virus therapy but may harm individuals taking St. John's Wort extracts (for mild to moderate depression). Hypericin causes hypericism, which is characterized by cellular damage in light-exposed areas. Ocular tissues are at risk for photosensitized damage; thus, we investigated the effects on hypericin photophysics by alpha-crystallin. We measured the transient absorption spectra and the 1270 nm luminescence of singlet (1Deltag) oxygen produced from hypericin in the presence of alpha-crystallin. alpha-Crystallin complexes hypericin, extending the lifetime of its triplet excited state; the Stern-Volmer slope is negative, but not linear, after a saturation curve. Damage to the lens protein by hypericin is known to occur via singlet oxygen, which oxidizes methionine, tryptophan and histidine residues. Binding to alpha-crystallin does not inhibit singlet oxygen formation by hypericin. alpha-Crystallin reacts with singlet oxygen with a rate constant of 1.3 x 10(8) M(-1) s(-1). Thus, we anticipate that hypericin will be an effective photosensitizer in the lens.     

Oxidation of guanosine derivatives by a platinum(IV) complex: internal electron transfer through cyclization

Many transition-metal complexes mediate DNA oxidation in the presence of oxidizing radiation, photosensitizers, or oxidants. The DNA oxidation products depend on the nature of the metal complex and the structure of the DNA. Earlier we reported trans-d,l-1,2-diaminocyclohexanetetrachloroplatinum (trans-Pt(d,l)(1,2-(NH(2))(2)C(6)H(10))Cl(4), [Pt(IV)Cl(4)(dach)]; dach = diaminocyclohexane) oxidizes 2'-deoxyguanosine 5'-monophosphate (5'-dGMP) to 7,8-dihydro-8-oxo-2'-deoxyguanosine 5'-monophosphate (8-oxo-5'-dGMP) stoichiometrically. In this paper we report that [Pt(IV)Cl(4)(dach)] also oxidizes 2'-deoxyguanosine 3'-monophosphate (3'-dGMP) stoichiometrically. The final oxidation product is not 8-oxo-3'-dGMP, but cyclic (5'-O-C8)-3'-dGMP. The reaction was studied by high-performance liquid chromatography, (1)H and (31)P nuclear magnetic resonance, and matrix-assisted laser desorption ionization time-of-flight mass spectrometry. The proposed mechanism involves Pt(IV) binding to N7 of 3'-dGMP followed by nucleophilic attack of a 5'-hydroxyl oxygen to C8 of G and an inner-sphere, 2e(-) transfer to produce cyclic (5'-O-C8)-3'-dGMP and [Pt(II)Cl(2)(dach)]. The same mechanism applies to 5'-d[GTTTT]-3', where the 5'-dG is oxidized to cyclic (5'-O-C8)-dG. The Pt(IV) complex binds to N7 of guanine in cGMP, 9-Mxan, 5'-d[TTGTT]-3', and 5'-d[TTTTG]-3', but no subsequent transfer of electrons occurs in these. The results indicate that a good nucleophilic group at the 5' position is required for the redox reaction between guanosine and the Pt(IV) complex.     

Intramolecular interaction effects and the structure of N2OS and N2O2: An Ab initio study

An ab initio study of O?N? N?S with full geometry optimization has been carried out to corroborate the presence of an interaction between the terminal atoms in this type of structure, which, in O?N? N?O, apparently stabilizes the cis conformer. Using the unscaled 4–31G basis set with a full set of d functions on the sulfur, there is a potential minimun at the trans but not the cis geometry. A gauche conformer with a torsional angle of 77.2° is the most stable. With N₂O₂ this basis set gives potential minima at both the cis and trans geometries, but the trans conformer is slightly more stable, contrary to experiment and the results of (7,3) basis-set calculations reported in the literature in which Gaussian lobe functions were employed. Using a (9,5) basis set there is no longer a potential minimum at the cis geometry, and a gauche structure is more stable than the cis conformer as in the case of N₂OS with the less-extended basis set. Force constants (harmonic and anharmonic), compliance constants, relaxed force constants, and interaction-displacement coordinates for both molecules are compared for key structural elements.     

Studies on the Stereochemistry of 2-(Nitromethylidene)-Heterocycles

The ¹H-NMR spectra of 2-(nitromethylidene)pyrrolidine ( 7 ), 1-methyl-2-(nitromethylidene)imidazolidind ( 10 ) and 3-(nitromethylidene)tetrahydrothiazine ( 11 ) in CDCl₃ and (CD₃)₂SO indicate that these compounds have the intramolecularly H-bonded structures (Z)- 7 , (E)- 10 and (Z)- 11 while the N-methyl derivative 8 of 7 is (E)-configurated in both solvents. 1-Benzylamino-1-(methyltio)-2-nitroehtylene ( 13 ), an acylic model, has the H-bonded configuration (E)- 13 in CDCl₃ and in (CD₃)₂SO. 2-(Nitromethylidene)thiazolidine ( 3 ) has the (E)-configuration in CDCl₃ but exists in (CD₃)₂SO as a mixture of (Z)- and (E)-isomers with the former predominating. Both species are detected to varying proportions in a mixture of the two solvents. ¹⁵N-NMR spectroscopy of 3 ruled out unambiguously the nitronic acid structure 6 and the nitromethyleimine structure 5 . The N-methyl derivative 4 of 3 is (Z)-configurated in (CD₃)₂SO. Comparison of the olefinic proton shifts of (Z)- 3 and (Z)- 4 with those of analogues and also of 1,1-bis(methylti)-2-nitroethylene ( 12 ) shows decreased conjugation of the lone pair of electrons of the ring N-atom in (Z)- 3 and (Z)- 4 . This is also supported by ¹³C-NMR studies. Plausible explanations for the phenomenon are offered by postulating that the ring N-atoms are pyramidal in (Z)- 3 and (Z)- 4 and planar in other cases or, alternatively, that the conjugated nitroenamine system gets twisted due to steric interaction between the NO₂-group and the ring S-atom. Single-crystal X-ray studies of 3 and 8 show that the former exists in the (Z)-configuration and the latter in (E)-configuration; the ring N-atom in the former has slightly more pyramidal character than in the latter.     

Synthesis and properties of organosoluble poly(amide imide imide)s based on tetraimide dicarboxylic acid condensed from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline,and trimellitic anhydride and various aromatic diamines

A novel tetraimide dicarboxylic acid was synthesized with the ring‐opening addition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline, and trimellitic anhydride in a 1/2/2 molar ratio in N‐methyl‐2‐pyrrolidone followed by azeotropic condensation to tetraimide dicarboxylic acid. A series of poly(amide imide imide)s (PAIIs) with inherent viscosities of 0.8–1.1 dL/g were prepared from tetraimide dicarboxylic acid with various aromatic diamines by direct polycondensation. Most of the PAIIs were readily soluble in a variety of amide polar solvents and even in less polar m‐cresol and pyridine. Solvent‐cast films had tensile strengths ranging from 99 to 106 MPa, elongations at break ranging from 8 to 13%, and initial moduli ranging from 2.0 to 2.3 GPa. The glass‐transition temperatures of these PAIIs were recorded at 244–276 °C. They had 10% weight losses at temperatures above 520 °C in air or nitrogen atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1092–1102, 2002     

Effect of plant matrix and fluid ethanol concentration on supercritical fluid extraction efficiency of schisandrin derivatives

An investigation of the effect of plant matrix on the supercritical fluid extraction efficiency of five schisandrin derivatives is reported, exhibiting a great difference with respect to extraction efficiency depending on the matrix. Pure supercritical CO2 at 60 degrees C and 34.0 MPa cannot fully recover schisandrin derivatives from the leaves as much as from the other matrices. Only 36.9% of these compounds are extracted from leaves of Schisandra chinensis by supercritical CO2 in comparison with organic solvent extraction. However, more than 80% of schisandrin derivatives are obtained from both stem and fruit parts. Ethanol addition also shows a different effect depending on plant matrix; that is, CO2 modified with 10% ethanol could enhance the yield of schisandrin derivatives from leaves by four times when compared with that of pure CO2, but it has little effect on both stems and fruits.     

Molecular mechanics (MM2) calculations and cone angles of phosphine ligands

Molecular mechanics (MM2) calculations were performed on 54 conformations of 18 phosphines (PH₃; PH_3−nR_n, where n = 1,…3, and R = Me and Et, n = 1 or 2 and R =ⁱPr, and n = 1 and R =^tBu, PMe₂Et, PMeEt₂, and PPhMe₂, and PPh₂R where R = Me, Et, ⁱPr, ^tBu and Ph). The results are compared to those previously obtained from MINDO/3 and MNDO calculations, and to experimental data. Single conformer cone angles and weighted average cone angles were calculated from MM2 optimized geometries employing Tolman's general definition, and they are compared to Tolman's values, MINDO/3 results, and T.L. Brown's E_R values. Of the cone angle definitions used, the weighted average values are suggested as the best single representation of phosphine ligand sizes. The steric parameters (cone angle and E_R values) alone, and in conjunction with electronic parameters, are correlated with experimental data.     

Fabrication of size-tunable gold nanoparticles array with nanosphere lithography, reactive ion etching, and thermal annealing

Two-dimensional ordered arrays of gold (Au) nanoparticles were fabricated using two different variants of the nanosphere lithography technique. First, ordered arrays of polystyrene nanospheres on Si substrate were used as deposition masks through which gold films were deposited by electron beam evaporation. After the removal of the nanospheres, an array of triangular Au nanodisks was left on the Si substrate. After thermal annealing at increasing temperature, systematic shape transition of the nanostructures from original triangular Au nanodisks to rounded nanoparticles was observed. This approach allows us to systematically vary the size and morphology of the particles. In the second and novel technique, we made use of reactive ion etching to simultaneously reduce the dimension of the masking nanospheres and create arrays of nanopores on the substrate prior to the deposition of the Au films. These samples were subsequently annealed, which resulted in size-tunable and ordered Au nanoparticle arrays with the nanoparticles nested in the nanopores of the templated substrate. With the nanoparticles anchored in the nanopores, the substrate could be useful as a template for growth of other nanomaterials.