中心裂纹圆盘应力强度因子的测试误差分析

本文在中心裂纹圆盘应力强度因子解析解的基础上,利用一阶微分法则,给出了与裂纹相对长度和加载角相关的应力强度因子(K 和K )的4个误差传递函数。这4个误差传递函数关于裂纹相对长度和加载角均是非线性的,它们既是误差分析的基础,又是合理确定裂纹相对长度和加载角的基础。分析结果表明,加载角的误差Δθ除了对纯 型K 的误差几乎没有影响,对纯 型K 影响较小外,对复合型K 、K 的误差均有较大影响。最后,本文建议裂纹相对长度的取值范围为0.4～0.6;还建议在复合型断裂试验时,必须依据对K 、K 的总体精度要求来严格控制加载角的精度。     

Band bending at the conducting polymer/indium tin oxide interfaces with and without ultraviolet treatment

In this study, the effect of ultraviolet treatment on the band bending at the poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate)/indium tin oxide (PEDOT:PSS/ITO) interfaces were researched. The authors suggested that ultraviolet treatment could lead to a reduction in the band bending at the PEDOT:PSS/ITO interface, owing to the removal of carbon contamination at the ITO surfaces and a decrease in the number of the trap-states at the PEDOT:PSS/ITO interface.     

Damage Evolution and Post-peak Gas Permeability of Raw Coal Under Loading and Unloading Conditions

Coalbed methane, a naturally occurring gas in coal, is regarded as a relatively clean-burning and eco-friendly resource. During mining, coalbed methane may be leaked to the environment, leading to potential coal mine catastrophes such as coal and gas outbursts, and gas explosions. In the interest of mine stability, and to enhance resource recovery and utilisation, it is fundamentally important to understand the permeability characteristics of coal, in particular its post-peak permeability behaviour. In this paper, an in-house developed tri-axial apparatus with the ability to investigate coupled thermal–hydrological–mechanical behaviour under servo-controlled seepage has been used to carry out a series of gas permeation experiments in coal samples. The coal samples were subjected to tri-axial tests, including the simulation of coal extraction by unloading the confining pressure applied on the test specimens. The deformation and permeability characteristics of raw coal during these tests were recorded. The volume changes of the coal samples during the tests were observed to occur in three stages: Stage 1: contraction, Stage 2: little or no volume change, and Stage 3: dilation. Corresponding to the volume changes, the gas seepage can also be divided into three stages: seepage decrease, steady seepage, and accelerated seepage. Based on the observed behaviour of coal samples during the tri-axial permeation tests, an analytical model to simulate damage evolution and its effect on the permeability of coal containing gas is proposed in this paper. It may be used to study the evolution of permeability with stress changes, and to provide insights into coal and gas outbursts in practice.     

Structural anisotropy and internal magnetic fields in trabecular bone: coupling solution and solid dipolar interactions

We investigate the use of intermolecular multiple-quantum coherence to probe structural anisotropy in trabecular bone. Despite the low volume fraction of bone, the bone-water interface produces internal magnetic field gradients which modulate the dipolar field, depending on sample orientation, choice of dipolar correlation length, correlation gradient direction, and evolution time. For this system, the probing of internal magnetic field gradients in the liquid phase permits indirect measurements of the solid phase dipolar field. Our results suggest that measurements of volume-averaged signal intensity as a function of gradient strength and three orthogonal directions could be used to non-invasively measure the orientation of structures inside a sample or their degree of anisotropy. The system is modeled as having two phases, solid and liquid (bone and water), which differ in their magnetization density and magnetic susceptibility. A simple calculation using a priori knowledge of the material geometry and distribution of internal magnetic fields verifies the experimental measurements as a function of gradient strength, direction, and sample orientation.     

Precise determination of 6Li cold collision parameters by radio-frequency spectroscopy on weakly bound molecules

We employ radio-frequency spectroscopy on weakly bound (6)Li(2) molecules to precisely determine the molecular binding energies and the energy splittings between molecular states for different magnetic fields. These measurements allow us to extract the interaction parameters of ultracold (6)Li atoms based on a multichannel quantum scattering model. We determine the singlet and triplet scattering lengths to be a(s) = 45.167(8)a(0) and a(t) = -2140(18)a(0) (1a(0) = 0.052 917 7 nm), and the positions of the broad Feshbach resonances in the energetically lowest three s-wave scattering channels to be 83.41(15), 69.04(5), and 81.12(10) mT.     

Impact of the Casimir-Polder potential and Johnson noise on Bose-Einstein condensate stability near surfaces

We investigate the stability of magnetically trapped atomic Bose-Einstein condensates and thermal clouds near the transition temperature at small distances 0.5 microm< or =d< or =10 microm from a microfabricated silicon chip. For a 2 microm thick copper film, the trap lifetime is limited by Johnson noise induced currents and falls below 1 s at a distance of 4 microm. A dielectric surface does not adversely affect the sample until the attractive Casimir-Polder potential significantly reduces the trap depth.     

Radiance-based monitoring of the extent of tissue coagulation during laser interstitial thermal therapy

Optical monitoring relates the dynamic changes in measured light intensity to the extent of treatment-induced coagulation that occurs during laser interstitial thermal therapy. We utilized a two-region Monte Carlo simulation to elucidate the nature of the changes in interstitial radiance and fluence that result from the formation of a volume of thermal coagulation surrounding a cylindrical emitter. Using simulation results, we demonstrate that radiance sensors are more sensitive than traditional fluence sensors to coagulation-induced scattering changes. Radiance measurements take advantage of directional detection angles that are more receptive to the onset and passing of the coagulation boundary. We performed experiments with albumen phantoms to demonstrate the practicality of the radiance method for monitoring interstitial laser thermal therapy.     

Photo-lithographically impregnated and molecularly imprinted polymer thin film for biosensor applications

A voltammetric sensor for albuterol was investigated where we combined the techniques of microfabrication and molecular imprinting to construct on-chip devices using photoirradiation of cross-linkable polymers. Molecularly imprinted polymer was coated as a thin film onto the gold working electrode on chip and the analyte was directly quantified by differential pulse voltammetric measurements.     

Measurement of filament length generated by an intense femtosecond laser pulse using electromagnetic radiation detection

We present a new method to measure the length of a filament induced by the propagation of intense femtosecond laser pulses in air. We used an antenna to detect electromagnetic pulses radiated from multipole moments inside the filament oscillating at the plasma frequency. The results are compared with the values detected from the backscattered fluorescence induced by multiphoton ionization of nitrogen molecules excited inside the filament. The values are found to be in good agreement. Received: 6 November 2002 / Revised version: 27 January 2003 / Published online: 24 April 2003 RID="*" ID="*"Corresponding author. Fax: +1-418/656-2623, E-mail: shosseini@phy.ulaval.ca