Studies on the Stereochemistry of 2-(Nitromethylidene)-Heterocycles

The ¹H-NMR spectra of 2-(nitromethylidene)pyrrolidine ( 7 ), 1-methyl-2-(nitromethylidene)imidazolidind ( 10 ) and 3-(nitromethylidene)tetrahydrothiazine ( 11 ) in CDCl₃ and (CD₃)₂SO indicate that these compounds have the intramolecularly H-bonded structures (Z)- 7 , (E)- 10 and (Z)- 11 while the N-methyl derivative 8 of 7 is (E)-configurated in both solvents. 1-Benzylamino-1-(methyltio)-2-nitroehtylene ( 13 ), an acylic model, has the H-bonded configuration (E)- 13 in CDCl₃ and in (CD₃)₂SO. 2-(Nitromethylidene)thiazolidine ( 3 ) has the (E)-configuration in CDCl₃ but exists in (CD₃)₂SO as a mixture of (Z)- and (E)-isomers with the former predominating. Both species are detected to varying proportions in a mixture of the two solvents. ¹⁵N-NMR spectroscopy of 3 ruled out unambiguously the nitronic acid structure 6 and the nitromethyleimine structure 5 . The N-methyl derivative 4 of 3 is (Z)-configurated in (CD₃)₂SO. Comparison of the olefinic proton shifts of (Z)- 3 and (Z)- 4 with those of analogues and also of 1,1-bis(methylti)-2-nitroethylene ( 12 ) shows decreased conjugation of the lone pair of electrons of the ring N-atom in (Z)- 3 and (Z)- 4 . This is also supported by ¹³C-NMR studies. Plausible explanations for the phenomenon are offered by postulating that the ring N-atoms are pyramidal in (Z)- 3 and (Z)- 4 and planar in other cases or, alternatively, that the conjugated nitroenamine system gets twisted due to steric interaction between the NO₂-group and the ring S-atom. Single-crystal X-ray studies of 3 and 8 show that the former exists in the (Z)-configuration and the latter in (E)-configuration; the ring N-atom in the former has slightly more pyramidal character than in the latter.     

马心血红蛋白在氧化铟电极上的直接电子传递反应

马心血红蛋白在氧化铟电极上的直接电子传递反应杨秀娟，菊，陆天虹（中国科学院长春应用化学研究所电分析化学开放实验室，长春，１３００２２）关键词血红蛋白，氧化铟电极，循环伏安法蛋白质与电极之间的电子转移在某种程度上类似于生物体内蛋白质分子之间的电子转移过...     

Synthesis and properties of organosoluble poly(amide imide imide)s based on tetraimide dicarboxylic acid condensed from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline,and trimellitic anhydride and various aromatic diamines

A novel tetraimide dicarboxylic acid was synthesized with the ring‐opening addition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline, and trimellitic anhydride in a 1/2/2 molar ratio in N‐methyl‐2‐pyrrolidone followed by azeotropic condensation to tetraimide dicarboxylic acid. A series of poly(amide imide imide)s (PAIIs) with inherent viscosities of 0.8–1.1 dL/g were prepared from tetraimide dicarboxylic acid with various aromatic diamines by direct polycondensation. Most of the PAIIs were readily soluble in a variety of amide polar solvents and even in less polar m‐cresol and pyridine. Solvent‐cast films had tensile strengths ranging from 99 to 106 MPa, elongations at break ranging from 8 to 13%, and initial moduli ranging from 2.0 to 2.3 GPa. The glass‐transition temperatures of these PAIIs were recorded at 244–276 °C. They had 10% weight losses at temperatures above 520 °C in air or nitrogen atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1092–1102, 2002     

Effect of plant matrix and fluid ethanol concentration on supercritical fluid extraction efficiency of schisandrin derivatives

An investigation of the effect of plant matrix on the supercritical fluid extraction efficiency of five schisandrin derivatives is reported, exhibiting a great difference with respect to extraction efficiency depending on the matrix. Pure supercritical CO2 at 60 degrees C and 34.0 MPa cannot fully recover schisandrin derivatives from the leaves as much as from the other matrices. Only 36.9% of these compounds are extracted from leaves of Schisandra chinensis by supercritical CO2 in comparison with organic solvent extraction. However, more than 80% of schisandrin derivatives are obtained from both stem and fruit parts. Ethanol addition also shows a different effect depending on plant matrix; that is, CO2 modified with 10% ethanol could enhance the yield of schisandrin derivatives from leaves by four times when compared with that of pure CO2, but it has little effect on both stems and fruits.     

Molecular mechanics (MM2) calculations and cone angles of phosphine ligands

Molecular mechanics (MM2) calculations were performed on 54 conformations of 18 phosphines (PH₃; PH_3−nR_n, where n = 1,…3, and R = Me and Et, n = 1 or 2 and R =ⁱPr, and n = 1 and R =^tBu, PMe₂Et, PMeEt₂, and PPhMe₂, and PPh₂R where R = Me, Et, ⁱPr, ^tBu and Ph). The results are compared to those previously obtained from MINDO/3 and MNDO calculations, and to experimental data. Single conformer cone angles and weighted average cone angles were calculated from MM2 optimized geometries employing Tolman's general definition, and they are compared to Tolman's values, MINDO/3 results, and T.L. Brown's E_R values. Of the cone angle definitions used, the weighted average values are suggested as the best single representation of phosphine ligand sizes. The steric parameters (cone angle and E_R values) alone, and in conjunction with electronic parameters, are correlated with experimental data.     

Effects of reduction temperature and metal-support interactions on the catalytic activity of Pt/gamma-Al2O3 and Pt/TiO2 for the oxidation of CO in the presence and absence of H2

TiO2- and gamma-Al2O3-supported Pt catalysts were characterized by HRTEM, XPS, EXAFS, and in situ FTIR spectroscopy after activation at various conditions, and their catalytic properties were examined for the oxidation of CO in the absence and presence of H2 (PROX). When gamma-Al2O3 was used as the support, the catalytic, electronic, and structural properties of the Pt particles formed were not affected substantially by the pretreatment conditions. In contrast, the surface properties and catalytic activity of Pt/TiO2 were strongly influenced by the pretreatment conditions. In this case, an increase in the reduction temperature led to higher electron density on Pt, altering its chemisorptive properties, weakening the Pt-CO bonds, and increasing its activity for the oxidation of CO. The in situ FTIR data suggest that both the terminal and bridging CO species adsorbed on fully reduced Pt are active for this reaction. The high activity of Pt/TiO2 for the oxidation of CO can also be attributed to the ability of TiO2 to provide or stabilize highly reactive oxygen species at the metal-support interface. However, such species appear to be more reactive toward H2 than CO. Consequently, Pt/TiO2 shows substantially lower selectivities toward CO oxidation under PROX conditions than Pt/gamma-Al2O3.     

Fabrication of size-tunable gold nanoparticles array with nanosphere lithography, reactive ion etching, and thermal annealing

Two-dimensional ordered arrays of gold (Au) nanoparticles were fabricated using two different variants of the nanosphere lithography technique. First, ordered arrays of polystyrene nanospheres on Si substrate were used as deposition masks through which gold films were deposited by electron beam evaporation. After the removal of the nanospheres, an array of triangular Au nanodisks was left on the Si substrate. After thermal annealing at increasing temperature, systematic shape transition of the nanostructures from original triangular Au nanodisks to rounded nanoparticles was observed. This approach allows us to systematically vary the size and morphology of the particles. In the second and novel technique, we made use of reactive ion etching to simultaneously reduce the dimension of the masking nanospheres and create arrays of nanopores on the substrate prior to the deposition of the Au films. These samples were subsequently annealed, which resulted in size-tunable and ordered Au nanoparticle arrays with the nanoparticles nested in the nanopores of the templated substrate. With the nanoparticles anchored in the nanopores, the substrate could be useful as a template for growth of other nanomaterials.     

Study of the purifying affects of thermal annealing for polymer‐wall liquid crystal cells

The thermal annealing process was proposed to purify the pixel regions of a liquid crystal (LC) cell with polymer walls. This technique, based on thermal‐induced phase separation, successfully evicts the residual monomers from the LC volume and significantly improves electro‐optical properties of the polymer‐wall LC devices. The influence of the annealing process on the purity of LC‐rich domain and the electro‐optic properties of a LC cell was explored with a series of experiments. According to the experimental results, the annealing technique is extremely prospective for constructing flexible polymer‐wall LC display applications.