Effect of industrial water components on thermal stability of nitrocellulose

In order to prevent the spontaneous ignition of nitrocellulose (NC), NC is stabilized by washing with industrial water in its synthesis process. However, there is a possibility that the components in industrial water contribute to the thermal stability of NC. In this way, the purpose of this study is to clarify the effect of industrial water components on the thermal stability of NC. In experiments, a heat flux calorimeter was used to observe the thermal behavior of NC with the residue of vaporized industrial water. The induction period of heat release of NC with 2-mass% residues was approximately 2–5 h shorter than that of NC alone whose induction period was observed at 7 h. Those results indicate that the residue destabilized NC. On the other hand, when the additive amount of the residue was increased, the induction period gradually increased as well. Based upon these results, we assume that inorganic salts contributing to stabilization and destabilization competitively coexist in the industrial water components. The same thermal analysis was performed on NC with CaCO₃, CaSO₄, CaCl, ZnSO₄, NaCl, and CuCl. Those salts are predicted to exist in the industrial water. In the results, the induction period of NC with 2-mass% CaCO₃ was approximately 15-h longer than that of NC alone, while the induction period with the inorganic salts CaSO₄, CaCl, ZnSO₄, NaCl, and CuCl was 4–5-h shorter. Therefore, when the industrial water components accumulate in NC, the destabilization by inorganic salts such as CaSO₄, CaCl, ZnSO₄, NaCl, and CuCl and the stabilization by compounds such as CaCO₃ are thought to countervail against each other.     

Sulfur-rich CpCo(dithiolene) complexes: Isostructural or non-isostructural couples of CpCo(III) with CpNi(III) dithiolene complexes

Eight new sulfur-rich [CpCo(dithiolene)] complexes were synthesized from [Zn(dmit)₂]²⁻ as a starting material. The structures, electrochemical behavior and electronic absorption spectra of the sulfur-rich [CpCo(S₂C₂S₂Y)] complexes could be compared with the early data of analogous Ni complexes. [CpCo(pddt)] (Y = -(CH₂)₃-), [CpCo(dpdt)] (Y = -CH₂C(CH₂)CH₂-), [CpCo(bddt)] (Y = -(CH₂)₄-), [CpCo(dtdt)] (Y = -CH₂SCH₂-) and [CpCo(poddt)] (Y = -CH₂C(O)CH₂-) crystallized in all isostructural with the corresponding paramagnetic [CpNi(dithiolene)] complexes, but [CpCo(dmid)] (Y = CO), [CpCo(dddt)] (Y = -(CH₂)₂-) and [CpCo(F₂pddt)] (Y = -CH₂CF₂CH₂-) crystallized in non-isostructural with them. These molecules are associated with intermolecular short S?S contacts in the crystals. [CpCo(F₂pddt)] did not show any remarkable S?S contacts but indicated interesting fluorine segregation and Cp?Cp face-to-face interactions. Redox potentials of [CpCo(dithiolene)] complexes were obtained with the cyclic voltammetry measurements and dimerized by electrochemical oxidations. Electronic absorption spectra of [CpCo(dithiolene)] complexes showed visible absorption in the range of 585-701 nm as lowest energy wavelengths (? = 9800-11,800 M⁻¹ cm⁻¹) in solutions, and they were higher energy than those of [CpNi(dithiolene)] complexes (near-IR).     

Four-Body CDCC Analysis for Breakup Reactions of Three-Body Projectiles

We present a new method of smoothing discrete breakup cross sections calculated by the continuum-discretized coupled-channels method based on the complex-scaling method. One of the advantages of this approach is to be applicable to many-body breakup reaction systems. In this work, we apply the new smoothing method to analyses of ¹²C(⁶He, nn ⁴He) and ²⁰⁸Pb(⁶He, nn ⁴He) reactions at 240 MeV/A.     

Decomposition of Benzene in Air in a Plasma Reactor: Effect of Reactor Type and Operating Conditions

The decomposition of benzene was carried out in two types of plasma reactors packed with BaTiO₃ pellets: one reactor had two stainless steel electrodes (SUS reactor), and the other reactor had a glass layer between two concentric electrodes (GL reactor). The decomposition efficiency and the suppression of formation of N₂O and NO_x were greater in the GL reactor than in the SUS reactor. In contrast, the suppression of O₃ formation and the oxidation to CO_x in the SUS reactor were superior to those in the GL reactor. The effect of wa eform and frequency of applied ac power was in estigated for each reactor.     

Effects of loading conditions and temperature on environmental stress cracking of low-density polyethylene

Fracture mechanics was used to investigate the environmental stress cracking (ESC) of low density polyethylene (LDPE). Annealed and quenched samples were prepared; a single edge notch was made and the samples were fractured under constant load in a liquid methanol environment. The relation between the stress intensity factor K and the crack speed ? has been investigated. There is a large difference between annealed and quenched samples in the variation of this relation with temperature and applied load. The cause of this difference is discussed in detail. We propose that thermally activated molecular motion is essential to ESC of the annealed LDPE while stress concentration contributes markedly to ESC of the quenched LDPE.     

Photochemical tuning of the helical structure of cholesteric liquid crystals by photoisomerization of chiral azobenzenes, and their structural effects

Several chiral azobenzene compounds having different chiral substituents were synthesized. A cholesteric phase was induced by mixing each chiral azobenzene compound with a host non-chiral nematic liquid crystal (E44). The helical twisting power (HTP) as well as the change in HTP by trans-cis photoisomerization of the chiral azobenzene compound was dependent on the structure of the chiral substituents. A compensated nematic phase was induced by combination of E44, a chiral azobenzene compound and a non-photochromic chiral compound. Reversible switching between the compensated nematic phase and cholesteric phase was brought about by trans-cis photoisomerization of the chiral azobenzene compound in the liquid crystalline systems. An azobenzene compound substituted with a menthyl group showed the highest efficiency as the trigger for the switching; this efficiency was related to the compactness of the chiral group substituted within the azobenzene core moiety.     

Linear Response Theory for Thermally Driven Quantum Open Systems

This note is a continuation of our recent paper [V. Jakšić Y. Ogata, and C.-A. Pillet, The Green-Kubo formula and Onsager reciprocity relations in quantum statistical mechanics. Commun. Math. Phys. in press.] where we have proven the Green-Kubo formula and the Onsager reciprocity relations for heat fluxes in thermally driven quantum open systems. In this note we extend the derivation of the Green-Kubo formula to heat and charge fluxes and discuss some other generalizations of the model and results of [V. Jakšić Y. Ogata and C.-A. Pillet, The Green-Kubo formula and Onsager reciprocity relations in quantum statistical mechanics. Commun. Math. Phys. in press.].     

Space-Time Point-Process Models for Earthquake Occurrences

Several space-time statistical models are constructed based on both classical empirical studies of clustering and some more speculative hypotheses. Then we discuss the discrimination between models incorporating contrasting assumptions concerning the form of the space-time clusters. We also examine further practical extensions of the model to situations where the background seismicity is spatially non-homogeneous, and the clusters are non-isotropic. The goodness-of-fit of the models, as measured by AIC values, is discussed for two high quality data sets, in different tectonic regions. AIC also allows the details of the clustering structure in space to be clarified. A simulation algorithm for the models is provided, and used to confirm the numerical accuracy of the likelihood calculations. The simulated data sets show the similar spatial distributions to the real ones, but differ from them in some features of space-time clustering. These differences may provide useful indicators of directions for further study.     

In VivoLongitudinally Detected ESR Measurements at Microwave Regions of 300, 700, and 900 MHz in Rats Treated with a Nitroxide Radical

A signal detector of longitudinally detected ESR (LODESR) is independent of the resonant frequency. We developed anin vivoLODESR spectrometer operating in the regions of 300, 700, and 900 MHz. Using this apparatus, we estimated signal intensities at different operating frequencies obtained from non- or high-dielectric loss phantoms that contained nitroxide radical solutions and from live rats that had received a nitroxide radical. Our result, higher signal intensities in the high-dielectric loss samples (such as physiological saline solution and animals) at a lower frequency, shows that the influence of a decrease in dielectric loss dominates over the signal reduction caused by smaller Zeeman splitting. We believe that this finding strongly supports anin vivoESR resonant frequency that tends to be low.     

Fermi-surface reconstruction without breakdown of Kondo screening at the quantum critical point

Motivated by recent Hall-effect experiment in YbRh(2)Si(2), we study ground state properties of a Kondo lattice model in a two-dimensional square lattice using variational Monte Carlo method. We show that there are two types of phase transition, an antiferromagnetic transition and a topological one (Fermi-surface reconstruction). In a wide region of parameters, these two transitions occur simultaneously without the breakdown of Kondo screening, accompanied by a discontinuous change of the Hall coefficient. This result is consistent with the experiment and gives a novel theoretical picture for the quantum critical point in heavy-fermion systems.