Silicene: compelling experimental evidence for graphenelike two-dimensional silicon

Because of its unique physical properties, graphene, a 2D honeycomb arrangement of carbon atoms, has attracted tremendous attention. Silicene, the graphene equivalent for silicon, could follow this trend, opening new perspectives for applications, especially due to its compatibility with Si-based electronics. Silicene has been theoretically predicted as a buckled honeycomb arrangement of Si atoms and having an electronic dispersion resembling that of relativistic Dirac fermions. Here we provide compelling evidence, from both structural and electronic properties, for the synthesis of epitaxial silicene sheets on a silver (111) substrate, through the combination of scanning tunneling microscopy and angular-resolved photoemission spectroscopy in conjunction with calculations based on density functional theory.     

Turbulent flow field and heat transfer in a heated circular channel under a reciprocating motion

This study is to simulate the turbulent flow field and heat transfer when cold fluid flows through a finite-length circular channel, which meantime undergoes a reciprocating motion using a numerical method. The mass, momentum and energy conservation equations and turbulent k- equations are derived for a turbulent flow field in a reciprocating coordinate by a coordinate transformation from the stationary coordinate system. The SIMPLE-C scheme is used to investigate heat transfer in a cooling channel undergoing a reciprocating motion by changing parameters and cooling mediums. The parameters are Reynolds number (7170 to 20000) and Pulsating number (1.55 to 4.65). The results show that the averaged Nusselt number increase with increasing both Reynolds number and Pulsating number, and the averaged Nusselt number of cooling oil is lower than that of water at the same incoming flow rate for both the stationary and reciprocating channel.     

A primal-dual interior point method for optimal zero-forcing beamformer design under per-antenna power constraints

In this paper, we consider an optimal zero-forcing beamformer design problem in multi-user multiple-input multiple-output broadcast channel. The minimum user rate is maximized subject to zero-forcing constraints and power constraint on each base station antenna array element. The natural formulation leads to a nonconvex optimization problem. This problem is shown to be equivalent to a convex optimization problem with linear objective function, linear equality and inequality constraints and quadratic inequality constraints. Here, the indirect elimination method is applied to reduce the convex optimization problem into an equivalent convex optimization problem of lower dimension with only inequality constraints. The primal-dual interior point method is utilized to develop an effective algorithm (in terms of computational efficiency) via solving the modified KKT equations with Newton method. Numerical simulations are carried out. Compared to algorithms based on a trust region interior point method and sequential quadratic programming method, it is observed that the method proposed is much superior in terms of computational efficiency.     

Chemical alterations to murine brain tissue induced by formalin fixation: implications for biospectroscopic imaging and mapping studies of disease pathogenesis

Understanding biochemical mechanisms and changes associated with disease conditions and, therefore, development of improved clinical treatments, is relying increasingly on various biochemical mapping and imaging techniques on tissue sections. However, it is essential to be able to ascertain whether the sampling used provides the full biochemical information relevant to the disease and is free from artefacts. A multi-modal micro-spectroscopic approach, including FTIR imaging and PIXE elemental mapping, has been used to study the molecular and elemental profile within cryofixed and formalin-fixed murine brain tissue sections. The results provide strong evidence that amino acids, carbohydrates, lipids, phosphates, proteins and ions, such as Cl(-) and K(+), leach from tissue sections into the aqueous fixative medium during formalin fixation of the sections. Large changes in the concentrations and distributions of most of these components are also observed by washing in PBS even for short periods. The most likely source of the chemical species lost during fixation is the extra-cellular and intra-cellular fluid of tissues. The results highlight that, at best, analysis of formalin-fixed tissues gives only part of the complete biochemical "picture" of a tissue sample. Further, this investigation has highlighted that significant lipid peroxidation/oxidation may occur during formalin fixation and that the use of standard histological fixation reagents can result in significant and differential metal contamination of different regions of tissue sections. While a consistent and reproducible fixation method may be suitable for diagnostic purposes, the findings of this study strongly question the use of formalin fixation prior to spectroscopic studies of the molecular and elemental composition of biological samples, if the primary purpose is mechanistic studies of disease pathogenesis.     

Vanadium Speciation by XANES Spectroscopy: A Three‐Dimensional Approach

A library of X‐ray absorption near‐edge structure (XANES) spectroscopic data for V^V, V^IV and V^III complexes with a broad range of biologically relevant ligand has been used to demonstrate that three‐dimensional plots of key XANES parameters (pre‐edge and edge energies; pre‐edge and white line intensities) can be used for the prediction of V oxidation states and coordination numbers in biological or environmental matrices. The reliability of the technique has been demonstrated by re‐analysis of the published XANES data for a V^V‐dependent bromoperoxidase.     

Comparative Studies of Different Quinolinone Derivatives as Donors in Fluorescence‐Resonance‐Energy Transfer (FRET) – Systems in Combination with a (Bathophenanthroline)ruthenium(II) Complex as Acceptor

We describe the preparation as well as a detailed photophysical study of Fmoc‐amino acid building blocks carrying different carbostyril (=quinolin‐2(1H)‐one) heterocycles as donors in a FRET (fluorescence‐resonance‐energy transfer) system in combination with a [Ru^II(bathophenanthroline)] complex (bathophenanthroline=4,7‐diphenyl‐1,10‐phenanthroline). The efforts resulted in a clear preference for building block 16 due to its ease of synthesis (Scheme 2), its chemical robustness, and the FRET efficiency when incorporated into peptides.     

Pure Blue‐Light Emissive Poly(oligofluorenes) with Bifunctional POSS in the Main Chain

Emission of conjugated polymers is known to undergo bathochromic shift from solution to film formation due to π–π stacking in the solid state. In this report, a series of pearl‐necklace‐like hybrid polymers is designed via the hydrosilylation condensation between bifunctional polyhedral oligomeric silsesquioxanes ( B‐POSS ) and oligofluorene segments. Optoelectronic analyses unequivocally show that the presence of these interconnecting B‐POSS can effectively reduce red‐shift in photoluminescence and electroluminescence during film formation. These hybrid poly(oligofluorenes) display stable blue emission with high color purity. Thermal analyses also indicate that they are vitrified polymers with high glass transition temperature (up to 125 °C). We believe that this strategy can be extended to other conjugated systems to control color purity in electroactive materials and holds promise as new emissive materials for various applications.

     

A Knowledge Base on Special Functions

An approach to developing a mathematical knowledge base on special functions is described and an example of such a knowledge base is presented. The problem consists of creating a uniform structural approach to classification of special functions of different types. Such an approach was realized in a series of papers by the authors. Two variants of an experimental version of the SFTools knowledge base developed on the basis of such a classification are presented. The first variant is realized in the Delphi language and works in the environment of the Windows 95 and Windows NT operating systems. The second variant presents an Internet modification of SFTools; it is realized in the Java language. Bibliography: 6 titles.     

Simultaneous determination of ofloxacin and ornidazole in pharmaceutical preparations by capillary zone electrophoresis

A simple, rapid and validated capillary electrophoretic method has been developed for the separation and determination of ofloxacin and ornidazole in pharmaceutical formulations with detection at 230 nm. Optimal conditions for the quantitative separations were investigated. Analysis times shorter than 4 min were obtained using a background electrolyte solution consisting of 25 mmol/L phosphoric acid adjusted with 1 m Tris buffer to pH 8.5, with hydrodynamic injection of 5 s and 20 kV separation voltage. The validation criteria for accuracy, precision, linearity and limits of detection and quantitation were examined and discussed. An excellent linearity was obtained in concentration range 25–250 µg/mL. The detection limits for ofloxacin and ornidazole were 1.03 ± 0.11 and 1.80 ± 0.06 µg/mL, respectively. The proposed method has been applied for the analysis of ofloxacin and ornidazole both individually and in a combined dosage tablet formulation. The proposed validated method showed recoveries between 96.16 and 105.23% of the nominal contents. Copyright © 2009 John Wiley & Sons, Ltd.