Dupin hypersurfaces with four principal Curvatures,II

If M is an isoparametric hypersurface in a sphere S ⁿ with four distinct principal curvatures, then the principal curvatures κ₁, . . . , κ₄ can be ordered so that their multiplicities satisfy m ₁ = m ₂ and m ₃ = m ₄, and the cross-ratio r of the principal curvatures (the Lie curvature) equals −1. In this paper, we prove that if M is an irreducible connected proper Dupin hypersurface in R ⁿ (or S ⁿ ) with four distinct principal curvatures with multiplicities m ₁ = m ₂ ≥ 1 and m ₃ = m ₄ = 1, and constant Lie curvature r = −1, then M is equivalent by Lie sphere transformation to an isoparametric hypersurface in a sphere. This result remains true if the assumption of irreducibility is replaced by compactness and r is merely assumed to be constant.      

Characterization of ceramic PVD thin films on AZ31 magnesium alloys

Ceramic thin films have been widely used to protect the metal substrate as coatings in the past years. In order to improve the poor corrosion resistance of AZ31 magnesium alloy, the study in this paper used the electron beam evaporation method to prepare ceramic PVD films on its surface with TiO₂ and Al₂O₃ as donors, respectively. Atomic force microscopy (AFM), scanning electron microscope (SEM), energy dispersive X-ray spectrometer (EDS), Auger electron spectroscopy (AES) and X-ray diffraction (XRD) were used to investigate the surface morphology, composition and microstructure of the thin films. Both films deposited on AZ31 took on compact top surface morphologies and grew as amorphous structures on substrate. AES test not only showed that films compositions deviated the standard stoichiometric ratios, but also found that element Mg diffused into films and existed as magnesium oxide in the TiO_x film as well as the AlO_x film. In the electrochemical corrosion test, the AlO_x coating on AZ31 exhibited the largest electrochemical impedance in a 3.5% NaCl solution. But it did not show better corrosion resistance than others for the poorer adhesion. Even if its thickness was small, the TiO_x coating on AZ31 exhibited the best corrosion resistance in this study. According to the observation and analysis, the damage of these films on AZ31 in aggressive solutions was mainly due to the existence of pores, microcracks, vacancies and poor adhesion between coating and substrate.     

LD端抽运平直腔Nd:YVO4固态激光器的输出功率特性研究

对LD端抽运平直腔Nd:YVO₄固态激光器输出功率特性受激光器内在诸因素(热透镜效应、腔长、激活孔径等)的制约关系进行了研究.并用传播圆-变换圆图解分析方法给出了合理的解释，同时，对进一步提高其输出功率特性指出了方向. 关键词： 固体激光器 热透镜 变换圆 平直腔     

Generalized KKM Type Theorems in FC-Spaces with Applications (I)

The class KKM(X,Y) (resp., s-KKM(X,Y,Z)) of set-valued mappings with KKM (resp., s-KKM) property is introduced in FC-spaces without any convexity structure. Some generalized KKM (resp., s-KKM) type theorems are proved in FC-spaces under much weak assumptions. As applications, some new section theorems and coincidence theorems are established in FC-spaces. These theorems generalize many known results in literature. The further applications of these results will be given in a follow-up paper.     

A family of skew Hadamard difference sets

In 1933 a family of skew Hadamard difference sets was described by Paley using matrix language and was called the Paley-Hadamard difference sets in the literature. During the last 70 years, no new skew Hadamard difference sets were found. It was conjectured that there are no further examples of skew Hadamard difference sets. This conjecture was proved to be true for the cyclic case in 1954, and further progress in favor of this conjecture was made in the past 50 years. However, the conjecture remains open until today. In this paper, we present a family of new perfect nonlinear (also called planar) functions, and construct a family of skew Hadamard difference sets using these perfect nonlinear functions. We show that some of the skew Hadamard difference sets presented in this paper are inequivalent to the Paley-Hadamard difference sets. These new examples of skew Hadamard difference sets discovered 70 years after the Paley construction disprove the longstanding conjecture on skew Hadamard difference sets. The class of new perfect nonlinear functions has applications in cryptography, coding theory, and combinatorics.     

1.54μmEr3+,Yb3+共掺玻璃激光器的速率方程及数值分析

LD抽运共掺Er,Yb玻璃激光器中的跃迁过程较复杂,针对双掺离子之间的能量传递和Er3+的多种跃迁过程,给出了详细的准三能级系统的速率方程,在合理简化后进行了数值分析,分析了Er3+掺杂浓度和介质长度、抽运光斑、输出镜透过率、谐振腔长、抽运光的椭圆度等因素对激光阈值及斜率效率的影响. 关键词： 1.54μm激光 Er3+玻璃 速率方程 数值分析     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

长波长大应变InGaAs/InGaAsP分布反馈激光器的材料生长与器件制备

采用低压金属有机化合物气相沉积法(LP-MOCVD)生长并制作了1.6—1.7μm大应变InGaAs/InGaAsP分布反馈激光器.采用应变缓冲层技术，得到质量良好的大应变InGaAs/InP体材料.器件采用了4个大应变的量子阱，加入了载流子阻挡层改善器件的温度特性.1.66μm和1.74μm未镀膜的3μm脊型波导器件阈值电流低(小于15mA)，输出功率高(100mA时大于14mW).从10—40℃，1.74μm激光器的特征温度T₀=57K，和1.55μm InGaAsP分布反馈激光器的特征温度相当. 关键词： MOCVD InGaAs/InGaAsP 应变量子阱 分布反馈激光器     

偶氮苯衍生物三阶非线性的四波混频研究

用皮秒Ｎｄ：ＹＡＧ激光器的倍频光（５３２ｎｍ）对具有离域π－共轭电子云结构的偶氮苯类样品材料作简并四波混频补给，测得三阶非线性电极化率ｘ＾（３）和它们的时间响应分别为１０＾－９ｅｓｕ和２０ｐｓ，并对影响ｘ＾（３）的瞬时光栅作用和ｘ＾（３）的响应时间人了讨论。