生长温度对纳米氧化锌场发射性能的影响

采用锌粉和银粉为蒸发源,用热蒸发法不同温度下制备了四针状纳米氧化锌,并以单独的锌粉做对照。采用扫描电子显微镜(SEM)观察其形貌,X射线衍射(XRD)谱表征其晶体结构。采用丝网印刷方法将其制备为场致电子发射阴极,将阴极与印刷有荧光粉的阳极板组装成二极结构场致发射显示屏,并进行了场致电子发射特性对比实验。结果表明较高温度制备的氧化锌具有较好的场致发射性能;掺杂银粉的蒸发源制备的样品的发射性能明显优于没有掺杂银粉的样品。实验证明ZnO是一种优良的场致发射冷阴极材料,在真空电子方面具有广阔的应用前景。     

Highly sensitive miniature photonic crystal fiber refractive index sensor based on mode field excitation

A highly sensitive miniature photonic crystal fiber refractive index sensor based on field mode excitation is presented. The sensor is fabricated by melting one end of a photonic crystal fiber into a rounded tip and splicing and collapsing the other end with a single-mode fiber. The rounded tip is able to induce cladding mode excitation, which resulted in an additional phase delay. Linear response of 262.28 nm/refractive index unit in the refractive index range of 1.337 to 1.395 is obtained for the physical length of a 953 μm sensor. The sensor is also shown to be insensitive to environmental temperature.     

Cold nuclear matter effects on J/ψ yields as a function of rapidity and nuclear geometry in d+A collisions at sqrt[s(NN)]=200 GeV

We present measurements of J/ψ yields in d+Au collisions at sqrt[s(NN)]=200 GeV recorded by the PHENIX experiment and compare them with yields in p+p collisions at the same energy per nucleon-nucleon collision. The measurements cover a large kinematic range in J/ψ rapidity (-2.2相似文献   

Method for suppressing the mirror image in Fourier-domain optical coherence tomography

A method, novel to our knowledge, for effective mirror image suppression in Fourier-domain optical coherence tomography based on a phase shift between neighboring A-mode scans is demonstrated. By realizing that the phase shifts of the real and mirror images are mutually reversed and assuming that the real image intensities of the two successive A-mode scans are the same, we can solve a set of two coupled equations to obtain the real image signals. The images based on the scanning of a high-resolution spectral-domain optical coherence tomography system are processed to show effective mirror image suppression results. Compared with a similar method of broad application, our approach has the advantages of shorter process time and higher flexibility in selecting the concerned image portions for processing.     

基于光纤布拉格光栅的智能服装人体测温模型研究

根据热量传递机理建立了智能服装中光纤布拉格光栅人体测温的热传递物理模型,对人体、空气层和服装之间的热传递进行了有限元建模和稳态热分析,确定了智能服装中光纤布拉格光栅温度场的数学模型,利用该数学模型对光纤布拉格光栅测量温度值进行了修正.在多点加权皮肤平均温度的基础上,提出了由左右胸、左右腋和后背五处皮肤温度构成的智能服装...     

Simultaneous measurement of curvature and temperature based on PCF-based interferometer and fiber Bragg grating

A sensor head consisting of a photonic crystal fiber (PCF)-based Mach-Zehnder interferometer (MZI) and a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of curvature and temperature. The MZI fabricated by splicing a short length of PCF between two single-mode fibers with the air-hole structure that completely collapsed near the splicing points, is sensitive to fiber bending and surrounding temperature, while the FBG is only sensitive to the later. Simultaneous measurement of curvature and temperature is therefore obtained. Sensitivities of 4.06 nm/m^− 1 and 6.30 pm/°C are achieved experimentally for curvature and temperature, respectively. And the corresponding resolutions are 5.2 × 10^− 4 m^− 1 and 1.25 °C for curvature and temperature, respectively, based on the wavelength measurement resolution of 10 pm.     

Noncollinear optical parametric amplification in lithium triborate seeded by a cw Ti:sapphire laser

Experimental investigations of a type-I noncollinear phase-matched optical parametric amplification based on lithium triborate, which was pumped by a 5-ns second-harmonic pulses from a Q-switched Nd:YAG, seeded by a cw Ti:sapphire laser at 800 nm, was presented. The experiments generated 2-ns signal output pulses at 800 nm, the maximum signal output pulse energy reached 19 μJ, the corresponding parametric gain was 44 dB. Furthermore, the experiments demonstrate that the 65 nm-FWHM parametric fluorescence gain spectrum could also be observed. A quantitative account of the ultrabroadband parametric fluorescence gain spectrum was given with our theory. The experimental measurements are in agreement with theoretical calculations.     

Measurement of nonrandom event-by-event fluctuations of average transverse momentum in square root of (sNN)=200 GeV Au+Au and p+p collisions

Event-by-event fluctuations of the average transverse momentum of produced particles near midrapidity have been measured by the PHENIX Collaboration in square root of (sNN)=200 GeV Au+Au, and p+p collisions at the Relativistic Heavy Ion Collider. The fluctuations are observed to be in excess of the expectation for statistically independent particle emission for all centralities. The excess fluctuations exhibit a dependence on both the centrality of the collision and on the pT range over which the average is calculated. Both the centrality and pT dependence can be well reproduced by a simulation of random particle production with the addition of contributions from hard-scattering processes.     

Ferroelectric behaviour of 30nm BaTiO3 ceramics prepared by high pressure assisted sintering

Dense nanocrystalline BaTiO3 ceramics with a homogeneous grain size of 30 nm was obtained by pressure assisted sintering. The ferroelectric behaviour of the ceramics was characterized by the dielectric peak at around 120 ℃, the P-E hysteresis loop and some ferroelectric domains. These experimental results indicate that the critical grain size for the disappearance of ferroelectricity in nanocrystalline BaTiO3 ceramics fabricated by pressure assisted sintering is below 30 nm. The ferroelectric property decreasing with decreasing grain size can be explained by the lowered tetragonality and the ＇dilution＇ effect of grain boundaries.