Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Anionic polymerization of star-shaped nylon 6 with a trifunctional initiator

The anionic polymerization of ?-caprolactam (CLM) has been shown to proceed at high reaction rate when catalyzed by metallic lactamates and initiated by acyllactams. The role of initiator and catalyst concentration on the process of ?-caprolactam anionic polymerization has been explored, with the aim of selecting the most suitable experimental conditions for reaction injection molding (RIM). The overall polymerization rates and physical properties for reaction injection molding of star-shaped nylon 6 homopolymer have been studied by the quasi-adiabatic process. In order to model the actual rapid molding conditions, time vs. temperature reaction profiles were measured, and the relative rates of polymerization subsequently determined from these data.     

Allocating unfunded liability in pension valuation under uncertainty

This paper studied the cost allocation for the unfunded liability in a defined benefit pension scheme incorporating the stochastic phenomenon of its returns. In the recent literature represented by Cairns and Parker [Insurance: Mathematics and Economics 21 (1997) 43], Haberman [Insurance: Mathematics and Economics 11 (1992) 179; Insurance: Mathematics and Economics 13 (1993) 45; Insurance: Mathematics and Economics 14 (1994) 219; Insurance: Mathematics and Economics 14 (1997) 127], Owadally and Haberman [North American Actuarial Journal 3 (1999) 105], the fund level is modeled based on the plan dynamics and the returns are generated through several stochastic processes to reflect the current realistic economic perspective to see how the contribution changed as the cost allocation period increased. In this study, we generalize the previous constant value assumption in cost amortization by modeling the returns and valuation rates simultaneously. Taylor series expansion is employed to approximate the unconditional and conditional moments of the plan contribution and fund level. Hence the stability of the plan contribution and the fund size under different allocation periods could be estimated, which provide valuable information adding to the previous works.     

磁控溅射ZnO薄膜的成核机制及表面形貌演化动力学研究

利用原子力显微镜分析了ZnO薄膜在具有本征氧化层的Si(100)和Si(111)基片上的表面形貌 随沉积时间的演化. 通过对薄膜生长形貌的动力学标度表征，研究了射频反应磁控溅射条件 下，ZnO薄膜的成核过程及生长动力学行为. 研究发现，ZnO在基片表面的成核过程可分为初 期成核阶段、低速率成核阶段和二次成核阶段. 对于Si(100)基片，三个成核阶段的生长指 数分别为β₁=1.04，β₂=0.25±0.01，β₃=0.74；对 于Si(11 关键词： ZnO薄膜 磁控溅射 生长动力学 成核机制     

Photoinduced Transformation between Charge Carrier and Spin Carrier in Polymers

By dynamical simulations, we show a transforming process between neutral soliton （spin carrier） and charged soliton （charge carrier） in polymers via photo-excitation, taking a polaron as the transitional bridge. It is photoinduced transformation between spin carrier and charge carrier. In this way, we demonstrate an access for polymers to be applied to spintronics.     

Anchoring Properties of Nematic Liquid Crystals Studied Using the Attenuated Total Reflection Method

By using the attenuated total reflection method associated with the excitation of surface plasmons, the tilt angle of the liquid crystal director and its gradient at the surface are measured in a planar nematic cell as a function of the applied voltage. The surface anchoring anisotropy δπ of the liquid crystal and the surface elastic constant k_s, are found to be δπ = 0.288 erg/cm and k_s, = 9·12 × 10^-11 erg, respectively, when the boundary condition suggested by Barbero et al is used. The theoretical and experimental values obtained with this boundary condition and that of Mada are discussed. The results show that the boundary condition proposed by Barbero et al is in better agreement with the experiment.     

生长温度对磁控溅射ZnO薄膜的结晶特性和光学性能的影响

采用反应射频磁控溅射方法，在Si (100) 基片上制备了具有高c轴择优取向的ZnO薄膜.利用 原子力显微镜、透射电子显微镜、X射线衍射分析、拉曼光谱等表征技术，研究了沉积温度 对ZnO薄膜的表面形貌、晶粒尺度、应力状态等结晶性能的影响；通过沉积温度对透射光谱 和光致荧光光谱的影响，探讨了ZnO薄膜的结晶特性与光学性能之间的关系.研究结果显示， 在室温至500℃的范围内，ZnO薄膜的晶粒尺寸随沉积温度的增加而增加，在沉积温度为500 ℃时达到最大；当沉积温度为750℃时，ZnO薄膜的晶粒尺度有所减小；在室温至750℃的范 围内，薄膜中ZnO晶粒与Si基体之间均存在着相对固定的外延关系；在沉积温度低于500℃时 ，制备的ZnO薄膜处于压应变状态，而750℃时沉积的薄膜表现为张应变状态.沉积温度的不 同导致ZnO薄膜的折射率、消光系数、光学禁带宽度以及光致荧光特性的变化，沉积温度对 紫外光致荧光特性起着决定性的作用.此外，探讨了影响薄膜近紫外光致荧光发射的可能因 素. 关键词： ZnO薄膜 表面形貌 微观结构 光学常数     

A completion of the spectrum for large sets of disjoint transitive triple systems

In this paper, we give a recursive construction from an LTTS(v + 2) to an LTTS(16v + 2) for v 3. Furthermore, the existence of LTTS(2ⁿ + 2) is proved. Thereby, we completely solve the existence problem of LTTS)(v) (large set of pairwise disjoint transitive triple systems of order v).     

On the existence of nontrivial extremal metrics on complete noncompact surfaces

In this paper, we consider the 2-dimensional local Calabi flow on a complete noncompact surface . Then, based on the Harnack-type estimate, we show the long-time existence and asymptotic convergence of a subsequence of solutions of such a flow on with and bounded from above by a negative constant on a ball. For its applications, this will lead to the existence of extremal metrics on a complete noncompact surface of finite topological type. In particular, there exists an extremal metric of nonconstant Gaussian curvature on or Received: 21 June 2001 / 18 January 2002 / Published online: 27 June 2002 Research supported in part by NSC and NCTS.