Collider search of light dark matter model with dark sector decay

We explore the possibility that the dark matter relic density is not produced by a thermal mechanism directly, but by the decay of other heavier dark-sector particles which themselves can be produced by the thermal freeze-out mechanism. Using a concrete model with light dark matter from dark sector decay, we study the collider signature of the dark sector particles associated with Higgs production processes. We find that future lepton colliders could be a better place to probe the signature of this kind of light dark matter model than hadron colliders such as LHC. Also, we find that a Higgs factory with center-of-mass energy 250 GeV has a better potential to resolve the signature of this kind of light dark matter model than a Higgs factory with center-of-mass energy 350 GeV.     

Natural color low-level-light EBAPS imaging system based on three-color LCTF北大核心CSCD

The high-sensitivity electron bombarded active pixel sensor (EBAPS) not only has the characteristics of high gain and high sensitivity of vacuum imaging devices, but also has the digital characteristics of solid-state imaging devices, which greatly improves the level of night vision imaging. A natural color low-level-light EBAPS imaging system was built based on three-color liquid crystal tunable filter (LCTF). According to the characteristics of low-level-light images, the color enhancement processing such as grayscale stretching, white balance, and color correction was performed on the color images obtained by the system. The experimental results show that the system can realize the natural low-illumination color imaging that reflects the color characteristics of the scene itself, which can effectively improve the observation effect of the characteristics of the target scene at night, and can realize the color imaging under 5×10−4 lx illumination. © 2022 Editorial office of Journal of Applied Optics. All rights reserved.     

BAHADUR ASYMPTOTIC EFFICIENCY IN A SEMIPARAMETRIC REGRESSION MODEL

ＢＡＨＡＤＵＲＡＳＹＭＰＴＯＴＩＣＥＦＦＩＣＩＥＮＣＹＩＮＡＳＥＭＩＰＡＲＡＭＥＴＲＩＣＲＥＧＲＥＳＳＩＯＮＭＯＤＥＬ￥ＬＩＡＮＧＨＵＡ；ＣＨＥＮＧＰＩＮＧＡｂｓｔｒａｃｔ：ＴｈｅａｕｔｈｏｒＳｇｉｖｅＭＬＥθ１ＭＬｏｆθ１ｉｎｔｈｅｍｏｄｅｌＹ＝θ...     

H+和Ar11+激发Si的K壳层X射线发射研究

测量了50–250 keV H⁺和1.0–3.0 MeV Ar¹¹⁺ 轰击Si表面过程中辐射的X射线. 结果表明, 在Ar¹¹⁺入射的情况下, 引起了Si的L壳层上3, 4个电子的多电离.计算了Si的K壳层X射线产生截面, 并将两体碰撞近似(BEA), 平面波恩近似, ECPSSR理论计算与实验值进行了对比. ECPSSR理论与质子产生的截面数据能够很好地符合; 而考虑多电离后, BEA理论与Ar¹¹⁺的实验结果符合较好. 关键词： X射线 高电荷态重离子 多电离     

基于Franz-Keldysh效应的倏逝波锗硅电吸收调制器设计

本文设计了一种基于Franz-Keldysh (FK) 效应的GeSi电吸收调制器. 调制器集成了脊形硅单模波导. 光由脊形硅波导以倏逝波形式耦合进锗硅吸收层. 在硅基锗二极管FK效应实验测试的基础上, 有源区调制层锗硅中的硅组分设计为1.19%, 从而使得器件工作在C (1528–1560 nm) 波段. 模拟结果显示该调制器的3 dB带宽可达64 GHz, 消光比为8.8 dB, 而插损仅为2.7 dB. 关键词： 锗硅 调制器 电光集成     

近玻尔速度Ne2+离子穿过碳膜引起的电子发射

本文测量了入射能为2–25 keV/u的Ne²⁺离子穿过不同厚度碳膜诱导的前向、后向 (分别对应出射表面和入射表面) 电子发射产额. 实验中通过改变炮弹离子的能量, 系统的研究了势能沉积、电子能损以及反冲原子对前向、后向电子发射产额的贡献. 结果表明, 离子的势能沉积只对后向电子发射有贡献, 前向、后向电子发射产额分别与Ne²⁺离子在薄膜出射、入射表面的电子能损近似成正比关系, 其中电子能损很低 (对应于离子能量很低) 的时候, 反冲原子对电子发射的贡献不能忽略. 关键词： 近玻尔速度 电子发射 电子能损 反冲原子     

基于电化学与热能的耦合关系演算聚合物锂离子动力电池的温度状态及分布

基于电化学-热耦合模型研究聚合物锂离子动力电池放电过程热行为, 分析了放电倍率、冷却条件对电池放电过程的温度变化及分布的影响规律. 结果表明: 3C放电时, 模型计算结果与实测结果的平均偏差为0.57 K, 方差为0.15, 说明模型准确度较高. 电芯的平均生热率在整个放电过程中呈现出增加的趋势, 初期和末期增长较快. 大倍率放电时, 与电流密度的平方呈正比的不可逆热所占的比重较大, 小倍率放电时, 电化学反应可逆热占主导. 改善冷却条件能降低电池放电过程的平均温度, 对流传热过程的表面传热系数为5 W/(m²·K), 1 C, 3 C, 5 C放电结束时, 电芯的平均温升为分别为6.46 K, 17.67 K, 27.53 K, 当对流传热过程的表面传热系数增加至25 W/(m²·K)时, 温升比自然对流条件下相同倍率放电时的温度分别降低了2.91 K, 4.68 K, 5.62 K, 但电芯温度分布的不一致性也会加剧. 关键词： 电化学 耦合 锂离子动力电池 温度分布     

强流ECR离子源引出系统研究

为了提高强流ECR 离子源的引出束流品质,分别设计了1# 和2# 引出系统,利用束流引出模拟软件PBGUNS 对1# 和2# 引出系统进行了质子束流引出与传输的模拟计算,结合实际测得的发射度数据分析引出系统,发现2# 引出系统比1# 引出系统引出束流品质高。对ECR 离子源引出系统的电势等位线分布等参数引起的球差进行了简单数学推导及MATLAB 绘图,并结合1# 和2# 引出系统束流相图模拟结果证明了球差会使引出束流品质有效发射度增长,通过适当加大电极孔径可改善束流聚焦情况,得到了束流光学聚焦较好的束流引出系统设计。To improve the quality of extracted ion beam from a high current ECR ion source, 1# and 2# extraction systems were designed and tested. The PBGUNS code was used to simulate the 1# and 2# extraction systems of proton ion beam. The emittance measurement results with the two different extraction systems were compared and analyzed with the simulation, the conclusion that more high quality beam extracted from 2# system than 1# system was got. The formula derivation of ECR ion source extraction system spherical aberration and MATLAB drawing was done by the analyzing on the distribution of extraction field equipotentials, effective emittance increasing caused by spherical berration was proved by 1# and 2# extraction systems beam phase space simulation result, beam focusing would be improved if electrode hole size increasing appropriately and a general concept on good optics focusing of ion beam extraction system was proposed finally.     

Optimal Due-Date Determination and Sequencing of <Emphasis Type="Italic">n</Emphasis> Jobs on a Single Machine

Given a set of n jobs with deterministic processing times and the same ready times, the problem is to find the optimal processing-time multiple k* for the T.W.K. due-date assignment method, and the optimal sequence σ* to minimize the total amount of missed due-dates. It is found that k* is a constant for a given job set and σ* should be in S.P.T. sequence. After the theoretical treatment, a numerical example is given for discussion. The optimal results can readily be extended to situations in which the processing times are random variables with known means and having the same coefficient of variation. From a practical point of view, the main merit of this paper is that it demonstrates how, under certain production environments in which completion times of the jobs can be anticipated, to determine the optimal due-dates and obtain the optimal sequence.     

Stochastic resonance in multi-scale bistable array

This Letter explores a new mechanism of stochastic resonance (SR) that is induced by the multi-scale noise decomposed from the input signal, which is promising in signal detection and processing under heavy background noise. The input signal is firstly decomposed to multi-scale signals by orthogonal wavelet transform. Then, the approximate signal, which contains the driving signal, is processed by an uncoupled parallel bistable array with the detailed signal of each scale as the internal noise. At last, a SR mechanism combining the effects of colored noise and array SR is proposed. The simulation results show that a high quality output signal can be obtained by the new mechanism. The proposed model is more adaptive to input signal with high noise intensity than single bistable SR system, which can be seen from the signal-to-noise ratio curves and average noise intensity curves.