Influence of demulsifiers of different structures on interfacial dilational properties of an oil-water interface containing surface-active fractions from crude oil

The influences of two commercial demulsifiers that have a straight chain and branch chain, respectively, on the dilational viscoelasticity of an oil-water interfacial film containing surface-active fractions from crude oil were investigated. The branch-chain demulsifier AE-121 could efficiently substitute surface-active fractions of different average molecular weights from the oil-water interface, while straight-chain SP-169 could only efficiently substitute those of large average molecular weight. It was apt to form a mix-adsorption layer with surface-active fractions of small average molecular weight. The results showed that the molecular size (or represented by average molecular weights) of the surface-active fractions was an important factor influencing the reciprocity of demulsifiers and surface-active fractions at the oil-water interface. This effect could be well explained by the difference between sizes of surface-active fraction molecules and vacancies between demulsifier molecules at the interface. The results of SDBS also proved this explanation.     

Synthesis of Iso-condensed Heteroaromatic Pyrroles and Their Application in the Preparation of Conducting Polymers

Iso-condensed heteroaromatic pyrroles 1 are 10 -electron aromatic compounds. They are of interest from both theoretical and synthetic points of view. They are the cyclic analogues of heteroaromatic ortho-quinodimethanes 2, and can react with dienophiles in a Diels-Alder reaction to give the synthetically useful cycloadducts 3. Many of them are also of potential pharmaceutical importance because they are isosteric with indoles. Iso-condensed heteroaromatic pyrroles 1 can be used also as the monomers for the synthesis of new conducting polymers 5 with special properties and characteristics. However, the methods for the efficient preparation of the iso-condensed heteroaromatic pyrroles are quite limited. Iso-condensed heteroaromatic pyrroles are generally unstable in acidic conditions and are easily oxidized by air. In our laboratories, we developed three methods for the preparation of this labile heterocyclic ring system under acidic, neutral, and basic conditions.1 Synthesis of the conjugated systems such as 6 for OLED applications will also be discussed.     

Synthesis and structural characterization of a terminal hydroxide containing alumoxane via hydrolysis of aluminum hydrides

A novel terminal hydroxide containing dinuclear alumoxane LAl(OH)OAlL(OCH=N-tBu) (3; L = HC(CMeNAr)2, Ar = 2,6-iPr2C6H3) was prepared by treatment of aluminum dihydride LAlH2 (1) and tert-butyl isocyanate in the presence of trace amounts of water and alternatively from 1 and LAlH(OCH=N-tBu) (2) with water. Compound 2 was obtained from the reaction of 1 and tert-butyl isocyanate.     

Influence of pretreatment conditions on low-temperature CO oxidation over Au/MOx/Al2O3 catalysts

Composite oxide MO_x/Al₂O₃ supported gold catalysts for low-temperature CO oxidation were prepared and investigated. The presence of transition metal oxide was proved to be beneficial to the improvement of catalytic performance of Au/Al₂O₃ catalysts for low-temperature CO oxidation. Furthermore, the influence of various pretreatment conditions on Au/MO_x/Al₂O₃ catalysts was studied carefully. The image of TEM showed that gold catalyst with small gold particles only in the form of a fine dispersion exhibited highly catalytic activity. The XPS, Fourier transform infrared (FTIR) spectroscopy characterization results of Au/FeO_x/Al₂O₃ catalyst showed that gold catalysts having partially oxidized gold species have the best catalytic performance. One possible pathway for CO oxidation on Au/FeO_x/Al₂O₃ catalyst is that the CO adsorbed on gold particles reacts with adsorbed oxygen, which is possible to occur on oxygen vacancies on the support or at the metal–support interface.     

Simultaneous Determination of Four Active Components in a Compound Formulation by Liquid Chromatography

Summary A rapid and accurate LC method is described for simultaneous determination of pseudoephedrine hydrochloride (PSE), acetaminophen (AMP), dextromethorphen hydrobromide (DEX), and diphenhydramine hydrochloride (DPH) in a compound formulation. Chromatographic separation of the four drugs was achieved on a Hypersil CN column (150 mm × 4.6 mm, 5 m particle) by use of a mobile phase comprising a mixture of 3 mM ion-pairing solution, 2% aqueous triethylamine solution, and 2 M phosphoric acid, 68:48:88 (v/v), pH 3.0, delivered at 1.0 mL min^–1. Compounds were detected at 215 nm and the run time was less than 10 min. The linearity, accuracy, and precision of the method were found to be acceptable over the concentration ranges 6.1–36.4 g mL^–1 for PSE, 65.0–390.0 g mL^–1 for AMP, 3.1–18.6 g mL^–1 for DEX, and 5.0–30.0 g mL^–1 for DPH.     

Superbeads: immobilization in "sweet" chemistry

Enzymatic oligosaccharide synthesis using recombinant glycosyltransferases is able to overcome the difficulties associated with chemical methods. Nonetheless, sugar nucleotide regeneration cycles are necessary for the glycosylation. The multistep enzyme reaction can be efficiently carried out on superbeads that are prepared by immobilizing multienzyme mixtures on bead support through fused binding domains.     

The Crystal Structure of Binuclear Metal Complexes of 7-Azaindole: Cu2 (CH3CO2)2 (C7H5N2)2(C7H6N2)2 AND Ni2(C7H5N2)4.2DMF

The crystal and molecular structures have been determined by single-crystal X-ray methods for the binuclear metal ions (II) complexes of 7-azaindole (1H-pyrrolo [2,3-b] pyridine, C₇H₆N₂ denoted by HL), Cu₂(CH₃CO₂)₂.·L₂(HL)₂ and Ni₂L₄.2DMF. The dark green crystal of Cu₂(CH₃CO₂)₂L₂(HL)₂ was found to crystallize in the monoclinic space group P 2₁/n with a = 9.566(2), b = 12.752(2), c = 12.852(4) Å, β = 99.23(3)⁰, V = 1547 Å, Z = 2, the final R = 0.062 and Rw = 0.053 for 1488 observations from 2722 unique reflections. The Cu-Cu distance is 2.747(2), Cu-N (L^?, bridge) is 1.966(7), Cu-N (HL, axial) is 2.229(8), and Cu-O is 2.031(6)Å. The red crystal of Ni₂L₄.2DMF was was found to crystallize in the triclinic space group \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm P \bar 1} $$\end{document} with a = 8.907(5), b = 9.462(2), c = 10.217(2) Å, α = 90.48(2), β = 91.09(3), γ = 110.69(3)⁰, V =805 ų, Z = 1, the final R = 0.063 and Rw = 0.069 for 1489 observations from 2834 unique reflections. The Ni-Ni distance is 2.594(2), Ni-N is 1.905(7) Å. These two molecules lie on crystllographic inversion centers and exhibit ligand disorder.     

Photochemical Reaction of Decacarbonyldirhenium with Thiophene and Crystal Structure of Tetradecacarbonylhydridotrirhenium

The photochemical reaction of Re₂(CO)₁₀ with thiophene in hexane solution was investigated under vacuum. Three rhenium clusters: H₂Re₃(CO)₁₂, HRe₃(CO)₁₄ and Re₃(CO)₁₄(OH)₄, were isolated. The structure of Fellmann-Kaesz cluster Complex HRe₃(CO)₁₄ was determined by use of the X-ray diffraction method. The three rhenium atoms form a plane of symmetry and L: Re₁Re₂Re₃ is 107°. The ten carbonyl groups bonded to the two terminal rhenium atoms Re₁ and Re₃, are staggered with respect to the central rhenium atoms. The bond lengths are 3.10 Å for Re₂-Re₃ and 3.34 Å for Re₁-Re₂. The bridging hydride is between Re₁ and Re₂.     

Optimal Assignment of Total-work-content Due-dates and Sequencing in a Single-machine Shop

This paper considers the problem of optimal assignment of total-work-content due-dates to n jobs and of sequencing them on a single machine to minimize an objective function depending on the assigned due-date multiple value and maximum tardiness penalty. It is shown that both the earliest due-date and shortest processing time orders yield an optimal sequence. A simple analytical solution method is presented to find the optimal due-dates. After the theoretical treatment an illustrative example is presented for discussion.