Dichloroborane-dioxane: an exceptional reagent for the preparation of alkenyl- and alkylboronic acids

Terminal alkynes and alkenes were conveniently hydroborated to the corresponding alkenyl- and alkyldichloroboranes using dichloroborane-dioxane in dichloromethane. These dichloroboranes were hydrolyzed by water to the corresponding alkenyl- and alkylboronic acids in moderate to good yields. With terminal alkenes and alkynes boron was predominantly attached to terminal carbon. Alkynes gave exclusively trans-vinylboronic acids.     

Studies on the substrate specificity of Escherichia coli galactokinase

In vitro glycorandomization (IVG) technology is dependent upon the ability to rapidly synthesize sugar phosphates. Compared with chemical synthesis, enzymatic (kinase) routes to sugar phosphates would be attractive for this application. This work focuses upon the development of a high-throughput colorimetric galactokinase (GalK) assay and its application toward probing the substrate specificity and kinetic parameters of Escherichia coli GalK. The demonstrated dinitrosalicylic assay should also be generally applicable to a variety of sugar-processing enzymes. [reaction: see text]     

Synthesis of Two Novel Rhenium（I） Bipyridyl Photosensitive Dyes

Two novel rhenium(I) 2, 2′-bipyridyl complexes, [(4,4′-di-COOEt-bipy) Re(CO)3 (NCCH3)PF6] and [(4,4′-di-COOEt-bipy) Re (CO)3 (NCS)], a model complex [(4,4′-di-COOEt-bipy) Re (CO)3 (pyridine)PF6], were synthesized. Their ground state electronic spectra and emission spectra were measured in acetonitrile. The MLCT absorption maximum of the complex exhibited a considerable red shift as the ligand changed from pyridine to CNCH3, or SCN.     

In vivo Laser-induced Fluorescence Imaging of a Rat Pancreatic Cancer with Pheophorbide-a

Laser-induced fluorescence (LIF) of pheophorbide-a (Ph-a) was used for imaging of a rat pancreatic tumor. Using a dimensionless function (the ratio of Ph-a fluorescence by bluish autofluorescence), the fluorescence contrasts between excised tumors and their paired pancreas were investigated up to 48 h after a 9 mg kg^-1 Ph-a intravenous administration. Among five tested excitation wavelengths, 355 and 610 nm excitations gave the best distinctive contrasts, both 48 h after dye injection. The LIF imaging of six intrapancreatic tumors and six healthy pancreas was carried out in vivo using two laser excitations: 355 nm (Nd:YAG + tripling) for bluish autofluorescence and 610 nm (rhodamine 6G dye) for reddish autofluorescence and dye emission. Images were recorded through bandpass filters at 470 and 640 nm (autofluorescence) and at 680 nm (dye + autofluorescence) with an intensified charged-coupled device camera. Autofluorescence as Ph-a fluorescence images did not allow accurate LIF diagnosis of pancreatic carcinoma. An image processing, including for each pixel a computed division of Ph-a fluorescence (after subtraction of reddish autofluorescence) by bluish autofluorescence intensity generated poorly contrasted tumor images in five of six and false tumor localization in one of three of the tumor-bearing pancreas. A fitting of the digital 640 nm autofluorescence up to the mean 680 nm fluorescence intensity in pancreas prior to subtraction allowed a safe diagnosis to be made with well-contrasted tumor images. To assess automation ability of the processing, a same fitting coefficient (mean of individual values) was applied. In this way, false-negative (one of six) and false-positive (two of six) images were present in tumor-bearing animals as false-positive in one-half of the controls. A successful standardized procedure was then applied with a normalization of 640 and 680 nm pancreas intensities to a same set threshold prior processing. In opposition to thin-layered hollow organs, such as bronchial tube or digestive tract, LIF imaging of carcinoma inserted in a compact organ is exhausting. The use of a dye excitable in the red wavelength range (610 nm for Ph-a) may partly solve this problem, rendering LIF imaging more accurate and potentially automated.     

有机-无机纳米复合材料光谱与电子性质研究进展

有机-无机纳米复合材料的研究在当前纳米科学技术的发展中占有重要地位，开创了材料与催化科学研究的新纪元。自从10年前首次合成纳米孔无机材料MCM-41至今，该领域研究不断深入，已展现出广阔的应用前景。当客体有机分子分散于纳米孔道内部时，其分子性质将产生明显变化。本文结合作者近期研究成果，力图从实验与理论两方面阐明在纳米复合体系中客体分子性质变化的原因。     

手性膦氮配体的合成及其钯配合物催化的不对称烯丙基烷基化反应

以价廉的天然产物辛可宁和奎宁为原料,在温和的条件下方便地合成了两个手性膦氮配体.考察了它们与过渡金属钯配合物在不对称烯丙基烷基化反应中的催化活性和不对称诱导作用.在1,3-二苯基-2-烯丙基-1-醇的乙酸酯与丙二酸二甲酯的反应中,两个配体均表现出中等的手性诱导活性(最高为73.5%e.e.).     

POLYBINAPHTHYLS INCORPORATING (R)-2,2''''-BINAPHTHO-20-CROWN-6 AND NAPHTHYL MOITIES

Chiral polymer was synthesized by the polymerization of (R)-6,6'-bistributylstannyl-2,2'-binaphtho-20-crown-6 (M-1) with 1,4-dibromo-2,3-bisbutoxy-naphthyl (M-2) by Pd(PPh3)4 catalyzed Stille coupling reaction. Both monomer and polymer were analyzed by NMR, MS, FT-IR, UV, polarimetry, DSC-TGA, CD, fluorescent spectroscopy and GPC. The major difference between monomer and polymer is that a long wavelength Cotton Effect was observed for the polymer due to its more extended conjugation in the repeating unit and a highly rigid backbone in the polymer chain. Polymer has strong blue fluorescence due to the efficient energy migration from the extended n-electronic structure of the repeating unit of the polymer to the chiral binaphthyl core and is expected to have potential application in the materials of fluorescent sensors and chiral chromatographic packing for resolution of racemic amino acid.     

Effects of hydrothermal post-treatment on microstructures and morphology of titanate nanoribbons

Titanate nanoribbons were prepared via a hydrothermal treatment of rutile-type TiO₂ powders in a 10 M NaOH solution at 200 °C for 48 h. The as-prepared titanate nanoribbons were then hydrothermally post-treated at 150 °C for 12-36 h. The titanate nanoribbons before and after hydrothermal post-treatment were characterized with FESEM, XRD, TEM, UV-VIS and nitrogen adsorption-desorption isotherms. The results showed that the hydrothermal post-treatment not only promoted the phase transformation from titanate to anatase TiO₂, but also was beneficial to the removal of Na⁺ ions remained in the titanate nanoribbons. After hydrothermal post-treatment, the TiO₂ samples retained the one-dimensional structure feature of the titanate nanoribbons and showed an obvious increase in the specific surface area and the pore volume.     

1,2,4-benzothiadiazine 1,1-dioxides 3. Reactions of 2-aminobenzenesulfonamide with chloroalkyl isocyanates

Reactions of 2-aminobenzenesulfonamide ( 1 ) with allyl, methyl, 2-chloroethyl aor 3-chloropropyl isocyanates gave 2-(methylureido)-, 2-(allylureido)-, 2-(2′-chloroethylureido)- and 2-(3′-chloropropylureido)-benzene sulfonamides 3a,b and 7a,b in excellent yields. Treatment of 3a,b at refluxing temperature of DMF afforded 2H-1,2,4-benzothiadiazin-3(4H)-one 1,1-dioxide ( 4 ) in good yield. However, when compounds 7a,b were refluxed in 2-propanol, 3-(2′-aminoethoxy)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 11a ) and 3-(3′-aminopropoxy)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 11b ) were obtained in a form of the hydrochloride salts 10a,b in 87% and 78% yields respectively. Heating 11b in ethanol gave a dimeric form of 2H-1,2,4-benzothiadiazin-3(4H)-one 1,1-dioxide and 3-(3′-aminopropoxy)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 12 ) in 55% yield. Treating of 7a,b or 11a,b with triethylamine at the refluxing temperature of 2-propanol afforded 3-(2′-hydroxyethylamino)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 2a ) and 3-(3′-hydroxypropylamine)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 2b ) via a Smiles rearrangement.