Synthesis of isotopically labeled arachidonic acids to probe the reaction mechanism of prostaglandin H synthase

Prostaglandin H synthase (PGHS) catalyzes the conversion of arachidonic acid to prostaglandin G(2) in the cyclooxygenase reaction. The first step of the mechanism has been proposed to involve abstraction of the pro-S hydrogen atom from C13 to generate a pentadienyl radical spanning C11-C15. We report here the synthesis of six site-specifically deuterated arachidonic acids to investigate the structure of the radical intermediate. The preparation of these compounds was achieved using a divergent scheme that involved one advanced intermediate for all targets. The synthetic design introduced the label late in the routes and allowed the utilization of common synthetic intermediates in the preparation of various targets. Both 13(R)- and 13(S)-deuterium-labeled arachidonic acids were synthesized in high enantiomeric purity as deduced from soybean lipoxygenase assays and mass spectrometric analysis of the resulting enzymatic products. Each synthetic compound was reacted under anaerobic conditions with the wide singlet tyrosyl radical of PGHS-2 to generate a radical intermediate that was analyzed by EPR. Deuterium substitution at positions 11, 13(S), and 15 resulted in the loss of one hyperfine interaction, indicating that the protons at these positions interact with the unpaired electron. Simulation of the spectra was achieved with one set of parameters that are consistent with the assignment of a pentadienyl radical. Use of 16-[(2)H(2)]-arachidonic acid indicated that only one of the protons at C16 gives rise to a strong hyperfine interaction. The findings are discussed in the context of two proposed mechanisms for the cyclooxygenase reaction.     

CO2 dynamic adsorption/desorption on zeolite 5A studied by 13C magnetic resonance imaging

We present the first 13C magnetic resonance imaging study of CO2 transient adsorption/desorption processes in a zeolite 5A column. CO2 transient concentration profiles were measured with a centric scan spin-echo single point imaging technique. The adsorption wave profiles were determined under flow conditions, with the results analyzed by the Bohart-Adams model. The model adequately accounts for the spatial and the temporal behavior of CO2 in the column. CO2 adsorption rate constants were calculated from the fit. Desorption profiles were acquired by blowing a helium stream through a zeolite 5A column saturated with CO2. An asymmetry between the adsorption and desorption profiles is readily apparent. A linear relationship between the CO2 condensed phase concentration and square root of time was observed.     

Direct observation of cations and polynucleotides explains polyion adsorption to like-charged surfaces

We show an experimental approach for directly observing the condensation of polynucleotides and their electrolyte counterions at a liquid/solid interface. X-ray standing waves (XSW) generated by Bragg diffraction from a d = 20 nm Si/Mo multilayer substrate are used to measure the distinct distribution profiles of the polyanions and simple cations along the surface normal direction with subnanometer resolution. The 1D spatial sensitivity of this approach is enhanced by observing the XSW induced fluorescence modulations over multiple orders of Bragg peaks. We study the interesting divalent cation driven adsorption of anionic polynucleotides to anionic surfaces by exposing a hydroxyl-terminated silica surface to an aqueous solution with ZnCl2 and mercurated poly-uridylic acid (a synthetic RNA molecule). The in situ long-period XSW measurements are used to follow the evolution of both the Zn and Hg distribution profiles during the adsorption process. The conditions and physical mechanisms that govern the observed divalent cation adsorption and subsequent polynucleotide adsorption to an anionic surface are explained by a thermodynamic model that incorporates nonlinear electrostatic effects.     

Construction of recombinant Escherichia coli strais for production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate)

Plastic wastes constitute a worldwide environmental problem, and the demand for biodegradable plastics has become high. One of the most important characteristics of microbial polyesters is that they are thermoplastic with environmentally degradable properties. In this study, pUC 19/PHA was cloned and transformed into three different Escherichia coli strains. Among the three strains that were successfully expressed in the production of polyhydroxyalkanoates (PHA), E. coli HMS174 had the highest yield in the production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-HV]). The cell dry weight and PHA content of recombinant HMS174 reached as high as 10.27 g/L and 43% (w/w), respectively, in fed-batch fermentor culture. The copolymer of PHA, P(HB-HV), was found in the cells, and the biopolymers accumulated were identified and analyzed by gas chromatography, proton nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. We demonstrated clearly that the E. coli host for PHA production has to be carefully selected to obtain a high yield. The results obtained indicated that a superior E. coli with high PHA production can be constructed with a desirable ratio of P(HB-HV), which has potential applications in industry and medicine.     

Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate

Nanocomposites of poly(vinyl alcohol)/silica nanoparticles (PVA-SNs) were prepared by in-situ radical copolymerization of vinyl silica nanoparticles functionalized by vinyltriethoxysilane (VTEOS) and vinyl acetate with benzoyl peroxide (BPO, i.e., initiator), subsequently saponified via direct hydrolysis with NaOH solution. The resulting vinyl silica nanoparticles, PVA-SNs were characterized by means of fourier transformation spectroscopy (FTIR), transmission electron microscopy (TEM) and the elemental analysis method. Effects of silica nanoparticles on viscosity and alcoholysis of PVA-SNs were studied by a ubbelohode capillary viscometer and the back titration method. The morphological structure of PVA-SN films was investigated by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile test were used to determine the thermal and mechanical properties of PVA-SN films. The results indicated that the content of vinyl groups on the surface of the vinyl silica nanoparticles was up to 3.02 mmol/g and vinyl silica nanoparticles had been successfully copolymerized with vinyl acetate. Furthermore, compared to pure PVA, silica nanoparticles bonded with polymer matrix in a low concentration affected the viscosity and alcoholysis of the PVA-SNs materials. At the same time, it resulted in the improvement of the thermal and mechanical properties of the PVA-SN materials due to a strong interaction between silica nanoparticles and the polymer matrix via a covalent bond. It could be found that the optical clarity of the membrane was changed through UV-Vis absorption spectrum due to the introduction of silica nanoparticles.     

Essential of Proline and Valine Residues in the Peptide Derived from Lactoferrin for Angiotensin Converting Enzyme Inhibition

We synthesized Leu‐Arg‐Pro‐Val‐Ala‐Ala‐Glu, the peptide contained in lactoferrin (Lf), to identify the angiotensin converting enzyme (ACE) inhibition. In an attempt to know the structure‐activity relationship of this peptide, we replaced Pro (the third amino acid residues from N‐terminal) or Val (the fourth amino acid residues from N‐terminal) with Ala (neutral amino acid), Glu (acidic amino acid) or Lys (basic amino acid) to produce six peptides. From the in vitro ACE inhibition (IC₅₀) of these synthesized peptides, the original peptide (Leu‐Arg‐Pro‐Val‐Ala‐Ala‐Glu) showed higher ACE inhibition than the replaced six peptides. Thus, replacement of Pro at the third amino acid residues or Val at the fourth position with Ala, Glu or Lys revealed the ACE inhibition to be lower than the original form of Leu‐Arg‐Pro‐Val‐Ala‐Ala‐Glu. Otherwise, we added one peptide at the C‐terminal of Leu‐Arg‐Pro‐Val‐Ala‐Ala‐Glu and found both products with an addition of Val (Leu‐Arg‐Pro‐Val‐Ala‐Ala‐Glu‐Val) or Ile (Leu‐Arg‐Pro‐Val‐Ala‐Ala‐Glu‐Ile) showing a lower ACE inhibition than the original one. The ACE inhibitions produced by both replaced peptides were without significance. Also, deletion of the last peptide at the C‐terminal (Leu‐Arg‐Pro‐Val‐Ala‐Ala) failed to produce a marked change of ACE inhibition as compared to the original one. These results suggest that Pro and Val are essential in the peptide for inhibition of ACE activity.     

Monthly sea surface temperature records reconstructed by δ<Superscript>18</Superscript>O of reef-building coral in the east of Hainan Island,South China Sea

Stable oxygen isotopic compositions of a coral colony ofPorites lutea obtained on a core allowed the reconstruction of a 56-a (1943–1998) proxy record of the sea surface temperatures. This coral δ¹⁸O data are from the east of Hainan Island water (22°20’N, 110°39’E), South China Sea. The relationship between δ¹⁸O in the skeletal aragonite carbonate and the sea surface temperature (SST) is SST = -5.36 δ¹⁸O_PDB-3.51 (r = 0.73,n = 470), dδ¹⁸O/d(SST) = -0.187?/ °C; and the thermometer was set at monthly resolution. The 56-a (1943–1998) proxy record of the sea surface temperatures reflected the same change trend in the northern part of South China Sea as the air temperature change trend in China.     

Novel approach to synthesizing hydrophobically associating copolymer using template copolymerization: the synthesis and behaviors of acrylamide and 4-(omega-propenoyloxyethoxy) benzoic acid copolymer

Hydrophobically associating copolymers of acrylamide (AM) with a small amount of 4-(omega-propenoyloxyethoxy) benzoic acid (PEBA, <2.5%) were synthesized by template copolymerization in the presence of poly(allylammonium chloride) (PAAC) as a template in an aqueous medium. These template copolymers exhibited remarkable thickening properties due to the effective hydrophobic association, which were similar to those copolymers with a multiblock structure obtained by the micellar process. The pH of the reaction medium and the molecular weight of the template strongly influenced the thickening properties of the products. In the experimental range, the higher the PEBA content, the larger the thickening capacity of these hydrophobic copolymers. The aggregate behaviors of these copolymers were studied by fluorescence, transmission electron microscopy (TEM), and light scattering techniques. The apparent critical interpolymer aggregate concentration (cac) of the copolymer solution was about 0.5 g/dL. As the concentration of the copolymer became higher than the cac, the aggregates changed their morphology from small hollow spheres to big flower-shaped aggregates. All the above results indicated that the template copolymerization gave access to a very simple and powerful means for the preparation of hydrophobically associating copolymers and other functional polymer materials.     

Four‐ and Five‐Coordinate Gallium Complexes Stabilized by Bidentate 2‐(Dimethylaminomethyl)Pyrrole Ligand: Molecular Structures of Ga[NC4H3(CH2NMe2)‐2]3 and GaMe2[NC4H3(CH2NMe2)‐2]

Treatment of GaCl₃ with one equiv of Li[NC₄H₃(CH₂NMe₂)‐2] (n = 1, 2, 3) in diethyl ether at ?78 °C yields GaCl_3‐n[NC₄H₃(CH₂NMe₂)‐2]_n (n = 1, 1 ; n = 2, 2 ; n = 3, 3 ). Compound 1 reacts with two equiv of RLi to afford GaR₂[NC₄H₃(CH₂NMe₂)‐2] ( 4a, R=Me; 4b, R=Bu ) via transmetallation. Reacting 2 with one equiv of RLi in diethyl ether, 3 and 4 are formed via ligand redistribution. Variable temperature ¹H NMR spectroscopic experiments reveal that the five‐coordinate gallium compound 3 is fluxional and results in a coalescence temperature at 5 °C, at which ΔG^≠ is calculated at ca. 10.4 Kcal/mole. All the new compounds have been characterized by ¹H and ¹³C NMR spectroscopy and the structures of compounds 3 and 4a have also been determined by X‐ray crystallography.     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.