Spectral studies on the interaction of Amido black 10B with DNA in the presence of cetyltrimethylammonium bromide

The interaction of Amido black 10B (AB) with DNA in basic medium was studied in the presence of cetyltrimethylammonium bromide (CTMAB) based on the measurements of resonance light scattering (RLS), UV–vis, CD spectra, and RLS imaging. The interaction has been proved to give a ternary complex of CTMAB–DNA–AB in Britton–Robinson buffer of pH 11.55, which exhibits strong negative Cotton effect at 233.3 nm and 642.8 nm, and strong RLS signals characterized at 469 nm. Experiments showed that the enhanced RLS intensities (ΔI_RLS) against the mixture of AB and CTMAB are proportional to the concentration of fish sperm DNA (fsDNA) and calf thymus DNA (ctDNA), respectively over the range of 0.03–1.0 and 0.05–1.5 μg ml⁻¹, with the limits of determination (3σ) of 7.3 ng ml⁻¹ for fsDNA and 7.0 ng ml⁻¹ for ctDNA.     

Diterpenoids of Isodon macrophylla

Two new ent‐abietane diterpenoids, macrophynin E ( 1 ) and macrophynin F ( 2 ), and a known related ent‐abietanoid (?)‐lambertic acid ( 3 ), together with four known ent‐kauranoids, were isolated from the roots and aerial parts of Isodon macrophylla, respectively. The structures of the new compounds were elucidated on the basis of spectroscopic‐data analysis and chemical correlations.     

Biosorption of metal ions with Penicillium chrysogenum

Biosorption of metal ions with Penicillium chrysogenum mycelium is described in this article. Alkaline pretreatment was used to remove proteins and nucleic acids from cells, and this treatment increased the adsorption capacities, for Cr³⁺ from 18.6 mg g⁻¹ to 27.2 mg g⁻¹, for Ni²⁺ from 13.2 mg g⁻¹ to 19.2 mg g⁻¹, for Zn²⁺ from 6.8 mg g⁻¹ to 24.5 mg g⁻¹. The adsorption of metal ions was strongly pH dependent. The mycelium could beused for large-scale removal of Cr³⁺ from tannery wastewater. The results show that this inexpensive mycelium adsorbent has potential in industry because of its high adsorption capacity. The main chelating sites are amino groups (−NH₂) of chitosan in the mycelium. A new model is established, which describes the relation of adsorption of metal ions on pH according to amino group chelating with metal ions and H⁺. The relative errors of simulation for Cu²⁺, Ni²⁺, Zn²⁺, and Cr³⁺ are 4.66%, 5.45%, 11.55%, and 1.69%, respectively.     

Synthesis of racemic and enantiomerically pure 2′-thia-2′,3′-dideoxycytidine as potential anti-hepatitis B virus agents

A novel class of nucleosides with the C₁, atom bonded to three hetero atoms was synthesized. 2′-Thia-2′,3′-dideoxycytidine was the pilot compound of this series. (±)-β-2′-Thia-1′,3′-dideoxycytidine ( 6 ) and (±)-α-2′-thia-2′,3′-dideoxycytidine ( 7 ) were synthesized from (±)-3-mercapto-1,2-propanediol. The synthesis of the enantiomerically pure 2′-thia-2′,3′-dideoxycytidines (α-D-form, β-D-form, α-1-form and β-L-form) from optically pure (S)-(2,2-dimethyl-1,3-dioxalan-yl)methyl p-toluenesulfonate ( 8 ) and its (R)-isomer 18 was also described. The preliminary biological results showed that (+)-β-D-2′-thia-2′,3′-dideoxycytidine ( 26 ) was the most active against human hepatitis B virus with an ED₅₀ of 3 μM.     

The Neutral Part of the Bark of Pinus Luchuensis Mayer

The neutral part of the acetone extract from the bark of Pinus luchuensis Mayer has been investigated and found to consist of alkanes (C₂₂–C₃₄) and triterpenes of serratene type. The triterpenes are 3β–methoxyserrat–14–en–21–one, serrat–14–en–3, 21–dione, 3β–hydroxyserrat–14–en–21–one, 3β–21α–dimethoxyserrat–l4–ene and 3β–methoxyserrat–14–en–21α–ol.     

呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.     

Fluorous distannoxane-catalyzed acetylation of alcohols in heterogeneous single fluorous solvent system

Acetylation of alcohols with an equivalent amount of acetic anhydride is feasible in the presence of fluorous distannoxane catalyst in heterogeneous single fluorous system. The fluorous layer containing catalyst can be recycled and reused at least 10 times.     

Controlling the size of nanostructures in thin films via blending of block copolymers and homopolymers

The effects of molecular weight and concentration of poly (methyl methacrylate) (PMMA) homopolymer or symmetric short polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) diblock copolymer on the size of the nanostructures of its blends with symmetric long PS-b-PMMA diblock copolymer have been investigated by atomic force microscopy. By careful controlling of the film thickness, solvent selectivity, and annealing time, PMMA cylindrical microdomains oriented normal to the film surface were obtained in all thin films. With the addition of both low- and high-molecular-weight PMMA homopolymers, the cylindrical domain sizes increased although it was less obvious for the lower molecular weight homopolymer. In contrast to the homopolymer, adding the short chain diblock copolymer resulted in a decrease in the cylindrical domain size, which was ascribed to the reduction of the interfacial tension and increase in the stretching energy.     

Reaction dynamics of Cl+CH3SH: rotational and vibrational distributions of HCl probed with time-resolved Fourier-transform spectroscopy

Rotationally resolved infrared emission spectra of HCl(v=1-3) in the reaction of Cl+CH3SH, initiated with radiation from a laser at 308 nm, are detected with a step-scan Fourier-transform spectrometer. Observed rotational temperature of HCl(v=1-3) decreases with duration of reaction due to collisional quenching; a short extrapolation to time zero based on data in the range 0.25-4.25 micros yields a nascent rotational temperature of 1150+/-80 K. The rotational energy averaged for HCl(v=1-3) is 8.2+/-0.9 kJ mol(-1), yielding a fraction of available energy going into rotation of HCl, fr=0.10+/-0.01, nearly identical to that of the reaction Cl+H(2)S. Observed temporal profiles of the vibrational population of HCl(v=1-3) are fitted with a kinetic model of formation and quenching of HCl(v=1-3) to yield a branching ratio (68+/-5):(25+/-4):(7+/-1) for formation of HCl(v=1):(v=2):(v=3) from the title reaction and its thermal rate coefficient k(2a)=(2.9+/-0.7)x10(-10) cm(3) molecule(-1) s(-1). Considering possible estimates of the vibrational population of HCl(v=0) based on various surprisal analyses, we report an average vibrational energy 36+/-6 kJ mol(-1) for HCl. The fraction of available energy going into vibration of HCl is f(v)=0.45+/-0.08, significantly greater than a value fv=0.33+/-0.06 determined previously for Cl+H2S. Reaction dynamics of Cl+H(2)S and Cl+CH3SH are compared; the adduct CH3S(Cl)H is likely more transitory than the adduct H(2)SCl.