Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

Viscometric study of gelatin in dilute aqueous solutions

The viscosities of aqueous solutions of gelatin at different temperatures were carefully measured in a common glass‐capillary Ubbelohde viscometer at dilute to extremely dilute concentrations. The adsorption effect that occurred in the viscosity measurements was theoretically analyzed and discussed. A theory based on Langmuir isotherms could adequately describe the existing data. Some structural information was obtained by the use of an iterative fitting procedure to treat the reduced viscosity data, which disclosed that individual gelatin chains underwent a coil‐to‐helix transition as the solution cooled from 40 to 15 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1804–1812, 2006     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

金属材料分析方法的选择和施行：第五讲 金属材料中钨的测定（续）

此外,尚有二硫酚、邻羟基酚类试剂、酸性三苯甲烷类试剂、偶氮类试剂以及荧光酮类试剂等也都有应用于钨的光度测定的实例。但由于共存元素的干扰以及方法的成熟程度等问题尚未完全得到解决,在金属材料分析中的应用尚不普遍。其中,苯基荧光酮类试剂对钢铁中低含量钨的测定有一定的应用前景,举两例说明:例1:邻氯苯基荧光酮(o-Cl-PF)-CTMAB光度法测定钢及合金中低含量钨[w(W)0.01%~0·50%]。称取试样0.100 0~0.200 0 g,溶于硫酸-磷酸混合酸(H2SO4+H3PO4+H2O=3+10+12)10 mL中,滴加浓硝酸约1 mL氧化,蒸发至冒白烟,冷却,加水溶解盐类后冷…     

Radiation Effects on Concentrated Potassium Hexacyanoferrate(III) Solutions

The neutron irradiated potassium hexacyanoferrate(III) solutions were analyzed for Fe(CN)₆^4?, Fe(CN)₆^3?, and Prussian blue. The retention values (1.1%) were constant throughout the pH and concentration ranges studied, and did not change with the length of irradiation. The complex behavior of the radiochemical yield of the Fe(CN)₆^4? and Prussian blue was attributed to the competition of the various reactions involved in the irradiation.     

Pulsed photothermal phase-shift spectroscopy for weak absorption measurement

A novel photothermal phase-shift spectroscopy configuration based on the retro-reflected beam interference has been developed and its operational principle is described. The weak absorption measurement ability of this technique is experimentally proven with a water/ethanol solution of standard Pyronine G dye and the limit of detection is found to be 1.8 x 10(-6) absorbance. Potential applications of the technique are discussed.     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

果蔬中L—抗坏血酸的示波计时电位K3Fe（CN）6滴定法研究

本文报导的方法是在南京大学高鸿教授研究的K_3Fe(CN)_6示波极谱滴定法(在PH8的K_2HPO_4—KH_2PO_4—KBr底液中,用0.04660mol/LK_3Fe(CN)_6标准溶液对纯抗坏血酸测定)的基础上,考虑到L—抗坏血酸(以下简称V_e)在碱性、中性介质中稳定性差,如用于V_e含量很微的果蔬测定,对结果影响大。本文改为H_2C_2O_4—KBr的酸性介质作底液,用