The Crystallization and Melting Behaviors of PDLA-b-PBS-b-PDLA Tri-block Copolymers

In this study,the poly(D-lactide)-block-poly(butylene succinate)-block-poly(D-lactide)(PDLA-b-PBS-b-PDLA)triblock copolymers with a fixed length of PBS and various lengths of PDLA are synthesized,and the crystallization behaviors of the PDLA and PBS blocks are investigated.Although both the crystallization behaviors of PBS and PDLA blocks depend on composition,they exhibit different variations.For the PDLA block,its crystallization behaviors are mainly influenced by temperature and block length.The crystallization signals of PDLA block appear in the B-D 2-2 specimen,and these signals get enhanced with PDLA block length.The crystallization rates tend to decrease with increasing PDLA block lendth during crystallizing at 90 and 100°C.Crystallizing at higher temperature,the crystallization rates increase at first and then decrease with block length.The crystallization rates decrease as elevating the crystallization temperature.The melting temperatures of PDLA blocks increase with block lengths and crystallization temperatures.For the PBS block,its crystallization behaviors are mainly controlled by the nucleation and confinement from PDLA block.The crystallization and melting enthalpies as well as the crystallization and melting temperatures of PBS block reduce as a longer PDLA block has been copolymerized,while the crystallization rates of the PBS block exhibit unique component dependence,and the highest rate is observed in the B-D 2-2 specimen.The Avrami exponent of PBS crystallites is reduced as a longer PDLA block is incorporated or the sample is crystallized at higher temperature.This investigation provides a convenient route to tune the crystallization behavior of PBS and PLA.     

Hierarchical self-assembly of 3D amphiphilic discrete organoplatinum(Ⅱ)metallacage in water

Here we described the design and synthesis of a discrete 3D amphiphilic metallacage 4,in which the tetragonal prismatic frameworks act as the hydrophobic cores and the poly(ethylene glycol)(PEG)chains as the hydrophilic tails.The structure of 4 was characterized by 1H NMR,31P NMR and electrospray ionization time-of-flight mass spectrometry(ESI-TOF-MS).Notably,4 with its Iong PEG tails was subsequently ordered into micelles at a low concentration(1.20×10^-6 mol/L)in water.As the concentration and cultivation time increased,the micelles can further self-assembly into nanofibers and nanoribbons.Considering the dynamic property of the coordination bond,these structures show reversible transformation under external stimuli.     

A new design of double-layered microchannel heat sinks with wavy microchannels and porous-ribs

Journal of Thermal Analysis and Calorimetry - A new design of double-layered microchannel heat sinks, which combines wavy microchannels with porous vertical ribs, is proposed in this work. The flow...     

Catalytic Selective Dihydrosilylation of Internal Alkynes Enabled by Rare‐Earth Ate Complex

Hydrosilylation of alkynes generally yield vinylsilanes, which are inert to the further hydrosilylation because of the steric effects. Reported here is the first successful dihydrosilylation of aryl‐ and silyl‐substituted internal alkynes enabled by a rare‐earth ate complex to yield geminal bis‐ and tris(silanes), respectively. The lanthanum bis(amido) ate complex supported by an ene‐diamido ligand proved to be the ideal catalyst for this unprecedented transformation, while the same series of yttrium and samarium alkyl and samarium bis(amido) ate complexes exhibited poor activity and selectivity, indicating significant effects of the ionic size and ate structure of the rare‐earth catalysts.     

Pathway from N‐Alkylglycine to Alkylisonitrile Catalyzed by Iron(II) and 2‐Oxoglutarate‐Dependent Oxygenases

N‐alkylisonitrile, a precursor to isonitrile‐containing lipopeptides, is biosynthesized by decarboxylation‐assisted ‐N≡C group (isonitrile) formation by using N‐alkylglycine as the substrate. This reaction is catalyzed by iron(II) and 2‐oxoglutarate (Fe/2OG) dependent enzymes. Distinct from typical oxygenation or halogenation reactions catalyzed by this class of enzymes, installation of the isonitrile group represents a novel reaction type for Fe/2OG enzymes that involves a four‐electron oxidative process. Reported here is a plausible mechanism of three Fe/2OG enzymes, Sav607, ScoE and SfaA, which catalyze isonitrile formation. The X‐ray structures of iron‐loaded ScoE in complex with its substrate and the intermediate, along with biochemical and biophysical data reveal that ‐N≡C bond formation involves two cycles of Fe/2OG enzyme catalysis. The reaction starts with an Fe^IV‐oxo‐catalyzed hydroxylation. It is likely followed by decarboxylation‐assisted desaturation to complete isonitrile installation.     

Stretchable Perovskite Solar Cells with Recoverable Performance

Perovskite solar cells (PSCs) are a promising photovoltaic technology for stretchable applications because of their flexible, light‐weight, and low‐cost characteristics. However, the fragility of crystals and poor crystallinity of perovskite on stretchable substrates results in performance loss. In fact, grain boundary defects are the “Achilles’ heel” of optoelectronic and mechanical stability. We incorporate a self‐healing polyurethane (s‐PU) with dynamic oxime–carbamate bonds as a scaffold into the perovskite films, which simultaneously enhances crystallinity and passivates the grain boundary of the perovskite films. The stretchable PSCs with s‐PU deliver a stabilized efficiency of 19.15 % with negligible hysteresis, which is comparable to the performance on rigid substrates. The PSCs can maintain over 90 % of their initial efficiency after 3000 hours in air because of their self‐encapsulating structure. Importantly, the self‐healing function of the s‐PU scaffold was verified in situ. The s‐PU can release mechanical stress and repair cracks at the grain boundary on multiple levels. The devices recover 88 % of their original efficiency after 1000 cycles at 20 % stretch. We believe that this ingenious growth strategy for crystalline semiconductors will facilitate development of flexible and stretchable electronics.     

Structure and photophysical and electrochemical properties of a copper porphyrin complex with a three‐dimensional framework

Porphyrins and metalloporphyrins can generally show attractive structural motifs and interesting properties. A new copper porphyrin, namely poly[[μ‐chlorido‐[μ₅‐5,10,15,20‐tetrakis(pyridin‐4‐yl)‐21H,23H‐porphine]tricopper(I)] [aquadichloridocopper(II)]], {[Cu₃(C₄₀H₂₄N₈)Cl][CuCl₂(H₂O)]}_n ( 1 ), was synthesized by the self‐assembly of copper chloride with 5,10,15,20‐tetrakis(pyridin‐4‐yl)‐21H,23H‐porphine under solvothermal conditions. The structure of this copper porphyrin was characterized by single‐crystal X‐ray crystallography and elemental analysis. The porphyrin macrocycle shows a distorted saddle geometry, with the four pyrrole rings slightly distorted in an alternating mode either upwards or downwards. The copper ions show three‐coordinated triangular and four‐coordinated square‐planar geometries. Every copper–porphyrin unit connects to 12 others via four μ₄‐bridging Cu₂Cl moieties to complete the three‐dimensional framework of compound 1 , with isolated CuCl₂(H₂O) units located in the voids. This copper porphyrin displays a red photoluminescence. Electrochemical measurements showed that compound 1 has two redox waves (E_1/2 = ?160 and 91 mV).     

Design of a quad-stable piezoelectric energy harvester capable of programming the coordinates of equilibrium points

In this study, a novel quad-stable energy harvester (QEH) is developed, in which its coordinates of equilibrium points can be user-defined like programming. This programmable feature distinguishes the proposed QEH from all reported magnet-type or buckling-type vibration energy harvesters. It has the advantage that it is easy to develop a high-performance QEH by appropriately programming these coordinate points and customizing a personalized QEH for different vibration environments. The dynamic model is established by the Ritz method and the Lagrange equation. The analytical steady periodic response is obtained by the average method. When the excitation acceleration is 2 m/s², the peak power is 575 μW at 8.5 Hz. Also, the influence of the coordinate arrangement of the equilibrium points on the energy harvesting performance is studied. A formula that can quickly determine the equilibrium point coordinates is given, and the QEH designed according to this formula has superior performance. At last, the performance of the designed QEH is compared with other reported vibration energy harvesters. It shows that the QEH has a high average output power (287 μW), high normalized power density (59.8 μW/cm³/g²), and wide operating frequency range (8.4 Hz) among these harvesters.