Volatile organic compounds in an urban environment: a comparison among Belgium,Vietnam and Ethiopia

The effects of urban and indoor air pollution on human health are a major environmental concern for all, but not much has been researched in the developing world. Specifically, quantitative data on the occurrence of volatile organic compounds (VOCs) – main contributors to air pollution – in Asia and Africa are scarce compared to the availability of data in the developed world. This paper presents one of the first studies focusing on the analysis and occurrence of VOCs in Vietnam and Ethiopia, which constitutes part of the novelty of this work. A spectrum of 34 VOCs was measured at eight different urban sites in Ghent (Belgium), Hanoi (Vietnam), Jimma and Addis Ababa (Ethiopia) during three sampling campaigns from September 2008 to September 2010. Sampling was done in an active way by means of sorbent tubes filled with Tenax TA. The analysis was done by TD-GC-MS using internal standard calibration. Data were interpreted and compared in terms of (i) individual, subgroup and total VOCs concentration (TVOCs), (ii) indoor-to-outdoor (I/O) concentration ratios, (iii) source identification by diagnostic ratio and/or correlation coefficients, and (iv) ozone formation potential (OFP) at outdoor sites based on up-to-date maximum incremental reactivity (MIR). I/O concentration ratios varied between 0.2 and 30, with big differences noticed with respect to the type of VOC(s) considered and the type of outdoor sampling location. The highest TVOC concentrations were measured in street samples with maximum values of 54?µg/m³ in Ghent, 507?µg/m³ in Hanoi and 318?µg/m³ in Addis Ababa illustrating the large difference in ambient air quality levels. This is also reflected in the arithmetic mean OFP values (µg/m³) of 82, 1308 and 596 in Ghent, Hanoi and Addis Ababa, respectively. Results of this study could be helpful to support formulation of national policy with regard to ambient air quality.     

“Heteroglycals” As New Potential Glycosidase Inhibitors. Synthetic Approaches From D-Arabinose

Within the frame of an ongoing project on glycosidase inhibitors, we have been interested in the synthesis of “heteroglycals”, namely, glycal analogues with sulfur or nitrogen in the ring. Glycals² are well known for their applications in sugar chemistry in particular for glycosyl transfer.³ They are also known as glycosidase inhibitors through a slow chemical reaction with the enzyme. Recently exo-glycals emerged as a new class of glycals⁴ which showed interesting features as glycosidase inhibitors but also as precursors of glycomimetics such as C-glycosides.⁵ We have undertaken investigations on related heteroglycals: such compounds are of interest because they combine a planar geometry at the anomeric center and a possible charge site - both elements known to be important to mimic the transition state of the enzymatic glycoside hydrolysis process.⁶     

A New Approach for the C-Alkylation of Unsaturated Sugars Involving the Benzothiazol-2-Ylthio Leaving Group

ABSTRACT

The leaving ability of the benzothiazol-2-ylthio group was applied to the C-alkylation of a 2,3-enopyranoside model structure. Coordination of the organometallic reagent to the thio-heterocyclic moiety was responsible for a stereospecific syn conjugate alkyl attack.     

Heterobimetallic Cuprates Consisting of a Redox‐Switchable,Silicon‐Based Metalloligand: Synthesis,Structures, and Electronic Properties

A series of bimetallic silyl halido cuprates consisting of the new tripodal silicon‐based metalloligand [κ³N‐Si(3,5‐Me₂pz)₃Mo(CO)₃]^? is presented (pz=pyrazolyl). This metalloligand is straightforwardly accessible by reacting the ambidentate ligand tris(3,5‐dimethylpyrazolyl)silanide ({Si(3,5‐Me₂pz)₃}^?) with [Mo(CO)₃(η⁶‐toluene)]. The compound features a fac‐coordinated tripodal chelating ligand and an outward pointing, “free” pyramidal silyl donor, which is easily accessible for a secondary coordination to other metal centers. Several bimetallic silyl halido cuprates of the general formula [CuX{μ‐κ¹Si:κ³N‐Si(3,5‐Me₂pz)₃Mo(CO)₃}]^? (X=Cl, Br, I) have been synthesized. The electronic and structural properties of these complexes were probed in detail by X‐ray diffraction analysis, electrospray mass spectrometry, infrared‐induced multiphoton dissociation studies, cyclic voltammetry, spectroelectrochemistry, gas‐phase photoelectron spectroscopy, as well as UV/Vis and fluorescence spectroscopy. The heterobimetallic complexes contain linear two‐coordinate copper(I) entities with the shortest silicon–copper distances reported so far. Oxidation of the anionic complexes in methylene chloride and acetonitrile solutions at ${E{{0\hfill \atop 1/2\hfill}}}$ =?0.60 and ?0.44 V (vs. ferrocene/ferrocenium (Fc/Fc⁺)), respectively, shows substantial reversibility. Based on various results obtained from different characterization methods, as well as density functional theory calculations, these oxidation events were attributed to the Mo⁰/Mo^I redox couple.     

The role of MFC/NFC swelling in the rheological behavior and dewatering of high consistency furnishes

The influence of swelling on the rheological and dewatering properties of high consistency nanocellulose based furnishes is considered. Different consistencies of suspensions (1–4 %) and furnishes (5–15 %) were prepared made of two distinctly different grades of nanocellulose containing, micro fibrillated (MFC) and nanofibrillated (NFC) cellulose, and systematic comparison between the rheological and dewatering parameters was conducted. The characterization of the rheological and dewatering properties was performed with a stress controlled rheometer combined with an immobilization cell in parallel plate geometry, as well as with an independent gravimetric dewatering device. The surface charge of nanofibrillated cellulose was found to influence the rheological and dewatering properties of the evaluated suspensions and furnishes due to its impact on swelling and effectively bound water. Due to the complex behavior of the novel materials, the immobilization times were difficult to determine from the changes in the damping factor, as often used for coating colors. Instead, we propose a modified method for determination of immobilization times based on a rheological analysis adopting the rate of change in viscoelastic loss factor over time, d(tan δ = G′′/G′)/dt, describing the critical point(s) in the ratio of the viscous to elastic stress response moduli. With this approach we show that it is possible to characterize immobilization of these materials incorporating the concept of the combined physical interactions of the components and the non-removable bound water, without requiring a direct measure of the nanocellulose surface swelling. Based on the results, we hypothesize that fibrillar swelling impacts the dewatering of MFC and NFC suspensions, and furnishes containing them, by an interfiber pore connectivity blocking/sealing mechanism, which effectively defines the immobilization of the material matrix at the end point of free water extraction caused by the physical blocking imposed by the remaining bound water.     

Size-selective absorption and adsorption in anionic pigmented porous coating structures: case study cationic starch polymer versus nanofibrillated cellulose

The use of nano- or microfibrillar cellulose (NFC or MFC) in papermaking is generally hampered by high cost and potentially wasteful use in typical wet end applications. The solubility and fines nature of the material makes it inefficient to retain, and when retained it is generally inefficiently applied within the spatial distribution of the paper fibre matrix. The benefits of capturing the important NFC in a layer structure, to enhance surface and stiffness properties of paper, board and laminates whereby NFC is entrapped at the surface of a fibrous web by forming an in situ composite, were previously shown for the exemplified case of modified porous calcium carbonate, as might be used in an inkjet coating application (Ridgway and Gane in Cellulose 19(2):547–560, 2011). The NFC is seen to integrate itself within the larger interparticle porous structure providing excellent holdout and thin layer continuity, essential in developing an efficient concentration of the NFC at the surface of the substrate. The effect is likened to the well-known I-beam construction. The concept need not be confined to porous pigments, as any pigment coating structure that absorbs and holds the NFC, thus creating an in situ composite, could be used. The aim of this study is to look at a range of different pigments and investigate how these could be used as coating structures by measuring the effect on the pore structure before and after absorbing NFC. This is achieved by using model porous tablet blocks made from the respective anionic coating formulations. The penetration of cationic starch solution, as might be applied for surface sizing on paper, is studied for comparison. The use of cationic starch is considered in the industry to provide reasonably effective surface concentrations due to the electrostatically driven adsorption to the anionic pore surfaces. The effect of water alone on the coating structure has also been measured to allow for structural relaxation, considered to be mainly related to the swelling properties of the anionic polyacrylic coating pigment dispersant. The results illustrate the size-exclusion properties of the pore structure in relation to the material being absorbed and partial resistance to bulk penetration by pore wall adsorption in the case of oppositely charged species. The distribution of the absorbate throughout the pore network can be derived using mercury intrusion porosimetry and electron microscopy, and is deemed critical in respect to controlling the end performance properties, be they, for example, barrier, strength-enhancing applications, or both.