掺硼多晶金刚石膜的电化学性能研究

采用EACVD(Electron Assisted Chemical Vapor Deposition)方法制备了掺硼金刚石膜, 并用扫描电镜、拉曼光谱及霍尔效应等测试方法对其表面形貌、生长特性、载流子浓度以及导电性能进行了分析. 测试结果表明, 掺硼金刚石膜是由微米级晶粒组成的多晶膜, 其载流子浓度为4.88×1020 cm-3, 电阻率为0.03 Ω·cm, 是高品质金刚石膜. 用该金刚石膜制作电化学电极, 利用循环伏安法分别测量了金刚石膜电极在氯化钾空白底液、亚铁氰化钾溶液和左旋半胱氨酸溶液中的循环伏安曲线, 发现该金刚石膜电极在水溶液中具有宽的电化学窗口(约为3.7 V)和接近零的背景电流, 在生物制剂的检测中具有很高的灵敏度和良好的稳定性, 是一种理想的电化学电极材料.     

TixNy团簇结构的密度泛函研究

采用杂化密度泛函方法(B3LYP)和有效核势基组预测了Ti_xN_y (x≤3, y≤2)团簇的结构及稳定性, 并分析了可能存在构型的电子结构. 结果表明Ti₂N中体系的自旋多重度由Ti原子决定. Ti₃N中随着N的配位数增加, N的负电荷增加, 平均每个Ti向N提供约0.3个电子. 从Ti₂N₂可能稳定构型分析, 成键数目越多, 能量上越有利, 且Ti—N键的数目的增加, 将削弱N—N间的成键.     

Study on the Binding Effect between Cordycepin and Calf Thymus DNA by Circular Dichroism

DNA works as hereditary material and plays vital role in life science. The study of the binding of small molecules complex to DNA has been the focus of intense investigation, owning to their stereo and sequence specific interaction with the double helix1-…     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.     

A Pair of Novel Heptentriol Stereoisomers from the Ascomycete Daldinia concentrica

A pair of novel heptentriol stereoisomers, hept‐6‐ene‐2,4,5‐triols 2 and 3 , were isolated from the culture broth of the ascomycete Daldinia concentrica (Bolton : Fries ) Cesati & De Notaris , besides three known compounds, i.e., 2,3‐dihydro‐5‐hydroxy‐2‐methyl‐4H‐1‐benzopyran‐4‐one ( 1 ), 3,5‐dihydroxy‐2‐(1‐oxobutyl)‐cyclohex‐2‐en‐1‐one ( 4 ), and pyroglutamic acid (=5‐oxo‐L ‐proline; 5 ). Their structures were determined by spectroscopic means, including 2D‐NMR (HMQC, HMBC, ¹H,¹H‐COSY).     

Overlapping spectra resolution using non-negative matrix factorization

Non-negative matrix factorization (NMF), with the constraints of non-negativity, has been recently proposed for multi-variate data analysis. Because it allows only additive, not subtractive, combinations of the original data, NMF is capable of producing region or parts-based representation of objects. It has been used for image analysis and text processing. Unlike PCA, the resolutions of NMF are non-negative and can be easily interpreted and understood directly. Due to multiple solutions, the original algorithm of NMF [D.D. Lee, H.S. Seung, Nature 401 (1999) 788] is not suitable for resolving chemical mixed signals. In reality, NMF has never been applied to resolving chemical mixed signals. It must be modified according to the characteristics of the chemical signals, such as smoothness of spectra, unimodality of chromatograms, sparseness of mass spectra, etc. We have used the modified NMF algorithm to narrow the feasible solution region for resolving chemical signals, and found that it could produce reasonable and acceptable results for certain experimental errors, especially for overlapping chromatograms and sparse mass spectra. Simulated two-dimensional (2-D) data and real GUJINGGONG alcohol liquor GC-MS data have been resolved soundly by NMF technique. Butyl caproate and its isomeric compound (butyric acid, hexyl ester) have been identified from the overlapping spectra. The result of NMF is preferable to that of Heuristic evolving latent projections (HELP). It shows that NMF is a promising chemometric resolution method for complex samples.     

Analysis of Equilibrium and Kinetics of Chromium-Fluoride Complexation from Spectroscopic Data via Chemometrics Methods

IntroductionStudies on reversible kinetic systems are consi-dered as a hotspot of chemical and biochemical kineticresearches[1,2]. Of late, some researches have been fo-cused on the simultaneous optimization of the obverseand reverse rate constants[3,4].H…     

Mitigation of Jahn–Teller distortion and Na+/vacancy ordering in a distorted manganese oxide cathode material by Li substitution

Layered manganese-based oxides are promising candidates as cathode materials for sodium-ion batteries (SIBs) due to their low cost and high specific capacity. However, the Jahn–Teller distortion from high-spin Mn³⁺ induces detrimental lattice strain and severe structural degradation during sodiation and desodiation. Herein, lithium is introduced to partially substitute manganese ions to form distorted P′2-Na_0.67Li_0.05Mn_0.95O₂, which leads to restrained anisotropic change of Mn–O bond lengths and reinforced bond strength in the [MnO₆] octahedra by mitigation of Jahn–Teller distortion and contraction of MnO₂ layers. This ensures the structural stability during charge and discharge of P′2-Na_0.67Li_0.05Mn_0.95O₂ and Na⁺/vacancy disordering for facile Na⁺ diffusion in the Na layers with a low activation energy barrier of ∼0.53 eV. It exhibits a high specific capacity of 192.2 mA h g⁻¹, good cycling stability (90.3% capacity retention after 100 cycles) and superior rate capability (118.5 mA h g⁻¹ at 1.0 A g⁻¹), as well as smooth charge/discharge profiles. This strategy is effective to tune the crystal structure of layered oxide cathodes for SIBs with high performance.

Li-Substitution in P′2-Na_0.67MnO₂ mitigates the anisotropic change of Mn–O bonds and Na/vacancy ordering, and hence significantly promotes its cycling stability and rate capability as a cathode material for sodium-ion batteries.     

Effects of fatty acids on growth and poly-3-hydroxybutyrate production in bacteria

The effects of saturated and unsaturated fatty acids (lauric acid, palmitic acid, steric acid, oleic acid, linoleic acid, soybean oil) on Sphaerotilus natans, 0B17 (Pseudomonas sp.), and recombinant Escherichia coli DH5(/pUC19/CAB were studied. Oleic acid enhances Poly-3-hydroxybutyrate (PHB) production in these three bacterial strains, suggesting that the single double bond of the acid activates the polyhydroxylkanoate accumulation enzymatic reaction. Under the effect of lauric acid and linoleic acid, the growth of S. natans and 0B17 were totally inhibited. However, the enhanced PHB accumulation in recombinant E. coli was observed.     

Construction of recombinant Bacillus subtilis for production of polyhydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are polyesters of hydroxyalkanoates synthesized by numerous bacteria as intracellular carbon and energy storage compounds and accumulated as granules in the cytoplasm of cells. In this work, we constructed two recombinant plasmids, pBE2C1, and pBE2C1AB, containing one or two PHA synthse, genes, respectively. The two plasmids were inserted into Bacillus subtilis DB104 to generate modified strains, B. subtilis/pBE2C1 and B. subtilis/pBE2C1AB. The two recombinants strains were subjected to fermentation and showed PHA accumulation, the first reported example of mcl-PHA production in B. subtilis. Gas Chromatography analysis identified the compound produced by B. subtilis/pBE2C1 to be a hydroxydecanoate-co-hydroxydodecanoate (HD-co-HDD) polymer whereas that produced by B. subtilis/pBE2C1AB was a hydroxybutyrate-co-hydroxyde-canoate-co-hydroxydodecanoate (HB-HD-HDD) polymer.