液相色谱-串联质谱法分析樟柳碱大鼠肝匀浆代谢产物

运用液相色谱-电喷雾离子阱串联质谱(LC-MSn)联用技术研究了樟柳碱大鼠肝匀浆中的代谢物。采用离体实验的代谢研究方法,将樟柳碱与大鼠肝匀浆在富氧条件下温孵,代谢物以乙酸乙酯萃取,以ReliA-sil C18(5μm,2 mm×150 mm)为分离柱,甲醇/0.01%三乙胺溶液(用甲酸调节pH 3.5)(60∶40,V/V)为流动相,采用LC-MS及LC-MSn等方法进行分析。和原药相比较,根据温孵液中分析物分子量的变化(ΔM)及其多级质谱数据,在樟柳碱的大鼠肝匀浆培养液中鉴定出了2种代谢物,即脱水去甲基樟柳碱和N-氧化樟柳碱。实验结果表明,该液相色谱-串联质谱方法适合于药物代谢物的快速分析。     

抛物面式太阳能聚能系统聚光特性模拟

结合集热器的光学特性,本文应用蒙特卡罗法对理想的槽型和碟型两种抛物面集热器在不同焦距、不同边缘角时焦面上的热流密度进行了计算,获得了焦距、边缘角和聚光比之间的关系。在考虑太阳不平行度、跟踪指向误差、镜面的反射误差条件下,对碟型抛物面太阳能聚能系统的辐射特性进行了数值模拟分析,获得了吸收器壁面热流分布以及边缘角对焦面热流分布的影响,为太阳能聚能系统的设计和安装提供参考依据。     

Self-assembled networks of conducting polyaniline in bulk polymers: A new class of conducting polymer blends

This review of the current status of conducting polymers will focus on recent progress which demonstrates that the initial promise of the late 1970's has become reality. Conducting polymers are now available as materials with truly unique properties: They combine the important electronic and optical properties of semiconductors and metals with the attractive mechanical properties and processing advantages of polymers. Conducting polymer blends based upon polyaniline (PANI) are a new class of materials in which the threshold for the onset of electrical conductivity (σ) can be reduced to volume fractions below 1%, well below that required for classical percolation (16% by volume for globular conducting objects dispersed in an insulating matrix in three dimensions). The origin of this remarkably low threshold for the onset of electrical conductivity is the self-assembled network morphology of the PANI polyblends which forms during the course of liquid-liquid separation. Since the average density of the conducting network near threshold is small, the conductivity increases smoothly and continuously over many orders of magnitude as the concentration of conducting polymer increases above threshold. The low percolation threshold and the continuous increase of σ(f) above threshold are particularly important; as a result of this combination, conducting polyblends can be reproducibly fabricated with controlled levels of electrical conductivity while retaining the desired mechanical properties of the matrix polymer.^1-3)     

火焰原子吸收光谱法测定中草药丹参不同部位金属元素的含量

采用HNO₃-HClO₄(4∶1)混酸消化丹参的根、茎和叶,利用火焰原子吸收光谱法对消化液中的五种人体必需的金属元素K,Cu,Zn,Fe,Mg进行了测定。该方法的标准曲线的相关系数为0.998 7～0.999 7,加标回收率为99.7％～104.4％,相对标准偏差(RSD)小于2％。结果显示：K,Cu,Zn,Fe,Mg在丹参根、茎和叶的含量均有以下次序：K＞Mg＞Fe＞Zn＞Cu。丹参叶的K,Cu,Fe,Mg的含量大于根和茎。根、茎、叶中的锌铜比值均较小。该测定结果为研究金属元素K,Cu,Zn,Fe,Mg在丹参中的分布以及金属元素的含量与丹参药效之间的关系提供了有用的数据。     

Central limit theorem for linear processes generated by IID random variables under the sub-linear expectation

In this paper, we investigate the central limit theorem and the invariance principle for linear processes generated by a new notion of independently and identically distributed(IID) random variables for sub-linear expectations initiated by Peng [19]. It turns out that these theorems are natural and fairly neat extensions of the classical Kolmogorov's central limit theorem and invariance principle to the case where probability measures are no longer additive.     

变温场中具损伤粘弹性矩形板的非线性动力响应分析

基于热粘弹性理论、Von Karman板理论和连续损伤力学,导出了二维状态下各向同性材料的变温粘弹性本构方程,建立了含损伤效应的各向同性粘弹性矩形板在变温场中的非线性运动控制方程,且应用有限差分法对问题进行求解.算例中,讨论了损伤演化及温度场等因素对粘弹性矩形板非线性动力学行为的影响,得出一些有意义的结论.     

基于近似解析法的超导储能磁体设计

降低超导储能磁体的研制成本一直是控制超导磁储能系统(Superconducting Magnetic Energy Storage, SMES) 总成本的重要手段之一. 本文考虑在一定磁体结构参数范围内, 磁体产生的最大磁场值可以采用级数进行 表示, 磁体的电感值可以采用线性函数表示, 给出了超导储能磁体磁场能量的近似解析表达式, 提出了一种基于近 似解析法的超导储能磁体设计方法. 该方法以储能磁体的线材用量最小作为设计目标, 在给定超导线材参数和临界电流特性曲线, 以及磁体储能总量要求的情况下, 依据此方法可快速的得到成本最优时所对应的磁体结构参数.将近似解析法优化和采用传统的有限元软件 Ansys 仿真优化进行对比分析, 结果表明采用近似解析法进行磁体优化更加方便快捷, 节省了大量计算时间.     

Giant Asymmetric Transmission and Circular Dichroism with Angular Tunability in Chiral Terahertz Metamaterials

Inspired by the chiral structure from mode interaction, a chiral terahertz metamaterial and its complementary structure with the coexistence of asymmetric transmission and circular dichroism response are designed. The asymmetric transmission happens in the presence of electric and magnetic modes perpendicular to each other, resulting from intrinsic chirality under normal incidence. Circular dichroism exists in the presence of electric and magnetic modes parallel to each other under oblique incidence because of extrinsic chirality. Both asymmetric transmission and circular dichroism are enhanced by complementary structures, benefitting from the coupling between adjacent units. The maximum of chiral parameter κ can achieve 450, which is one hundred times higher than previously reported. The chiral response can be tuned by the incident angle and is sensitive to the environmental refractive index. The results highlight the potential applications of these metamaterials in chiral sensing and polarization transformation devices.     

正电子冲击下氦电离三重微分截面的理论计算

我们发展了一种正电子碰撞原子电离的畸变波Born近似方法, 在这个方法中,正负电子偶素通道通过一个ab initio的光学势附加到入射粒子和靶的相互作用势上,且通道对电离作用被第一次被考虑在正电子碰撞原子电离的过程中. 应用这个方法计算了在50 eV入射能量范围氦的电离的三重微分截面,计算结果和实验数据很好的符合.     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。