N-(邻-氯苯基)氨基乙酸铜(Ⅱ)和N-(邻-甲基苯基)氨基乙酸铜(Ⅱ)的合成、晶体结构和电子结构

合成了N-(邻氯苯基)氨基乙酸铜(Ⅱ)和N-(邻甲基苯基)氨基乙酸铜(Ⅱ)的单晶体,测定了它们的晶体结构,并对其电子结构进行EHMO计算。N-(邻氯苯基)氨基乙酸铜(Ⅱ)属单斜晶系,空间群P2₁/a.a=8.786(4),b=7.777(2),c=11.956(2)Å,β=96.01(3)°,V=812.4ų,Z=2,D_c=1.77g·cm^-3;N-(邻甲基苯基)氨基乙酸铜(Ⅱ)属单斜晶系,空间群P2₁/a,a=8.925(6),b=7.973(8),c=11.856(9)Åβ=96.23(6)°,V=838.6Å,Z=2,D_c=1.55g·cm^-3。两配合物互为异质同晶。配合物中,铜原子为分子的对称中心,并与两个配位体的两个羧基氧和两个氨基氮原子形成四方形配位结构,平均Cu-O键长为1.902Å,Cu-N为2.050Å。量子化学计算表明,在配位键的形成中,铜原子的d轨道的作用均不大,但配体中苯环上取代基的性质对Cu-N键强度有一定影响。     

La2Zr2O7催化剂结构相变对甲烷氧化偶联反应性能的影响

采用共沉淀法并通过改变焙烧温度制备了一系列具有不同晶相结构的La₂Zr₂O₇催化剂，在微型固定床反应器上评价其甲烷氧化偶联反应性能，并利用XRD、Raman、CO₂-TPD、XPS等表征手段，探究催化剂的物相结构、表面碱性以及表面氧物种的变化规律。结果表明，随着焙烧温度从700℃逐渐升高到1200℃，La₂Zr₂O₇催化剂结晶度不断提高，晶相发生明显变化，从无定形结构逐渐向缺陷萤石结构过渡，最终转变成烧绿石结构。焙烧温度提高促使La₂Zr₂O₇晶相转变过程中，催化剂表面的碱性强度减弱，中等碱性位数量以及具有催化活性的表面氧物种O₂^2-和O₂^-的相对含量不断减少，致使催化剂的CH₄转化率和C₂₊选择性不断降低。其中，无定形LZO-CP-700催化剂表现出最佳的甲烷氧化偶联反应性能。     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

A supported gold catalyst for the elimination of hydrogen from CO2 feed gas in the production of urea

Supported gold catalyst for eliminating hydrogen from CO₂ feed gas in the production of urea is found to be superior to other industrial catalysts (e.g. Pt/Al₂O₃ and PdPt/Al₂O₃) in catalytic activity and resistance to sulfur poisoning.     

热定型聚酯纤维内应力与晶格变形的关系

<正> 结晶学家认为低分子物结晶虽可能存在一定缺陷和变形,但一般都具有一定的晶胞参数。这一概念对于高分子物结晶已不再正确。Bosley认为成形、热处理、冷却速率和杂质的存在皆可引起晶格变形;Fakirov故意在PET中加入少量杂质,却未引起变形。至今,PET已累积了7组晶胞参数,8个计算所得的晶区密度显示了较大幅度的波动(见     

正已醇-邻、间、对二甲苯二元系固液相平衡

Melting temperatures have been measured and the solid-liquid phase diagrams constructed for 1-hexanol＋o-xylene, 1-hexanol＋m-xylene and 1-hexanol＋p-xylene. They are simple eutectic systems. Excess mole Gibbs free energies were calculated at 298.15K, showing larger positive deviations from ideal-solution behavior. The largest values of GmE are 711、 650 and 800 J•mol-1 for {o-C6H4(CH3)2＋C6H13OH}、 {m-C6H4(CH3)2 ＋ C6H13OH} and {p-C6H4(CH3)2＋C6H13OH} respectively.     

光谱复杂的稀土基体中稀土杂质ICP光谱测定的一些问题

ICP激发光源以其独特的功能使ICP/AES技术在稀土分析中的应用日益广泛,在一定程度上取代了经典的直流电弧光谱法,但应指出,由于常规雾化器的低雾化效率(≤5％)和试样的高倍稀释,ICP/AES技术的实际检测能力的改善并不明显,本文用ICP光谱法测定了     

基于磁泳的生物分离分析技术

利用磁场诱导的微粒运动即磁泳对磁响应性粒子进行精细分离,是近年来发展起来的选择性分离细胞和高分子量核酸的有效技术。本文在阐明磁泳分离原理的基础上,介绍了磁泳分离的分流薄层分级技术、四极磁场流动分离技术和微芯片上的自由流磁泳分离技术的装置构造、工作原理及其在生物分离分析中的应用。     

Modified modeling of the effect of pH and viscosity on the mass transfer in hydrophobic hollow fiber membrane contactors

This paper studied the effect of pH and the viscosity of feed solution on the mass transfer in two different specifications of hydrophobic hollow fiber membrane contactors. Experimental results showed that the pH of the feed had a significant effect on the rate of mass transfer, the flux and the removal efficiency of easily ionized volatile compounds (VCs), such as ammonia. In unbuffered feed solutions, both the resistance of membrane and the resistance of feed side were affected by the pH of feed and both of them had contributions to the overall mass transfer. A model, , was proposed to predict the effect of pH and gave good agreement with the experimental data for the two contactors. The relationship between viscosities and the mass transfer coefficient could be described by . Based on our experiments, the change of the viscosities in the concentration range of ammonia from 50 to 10,000 mg l⁻¹ caused about 3–4% variation of the mass transfer coefficients. Moreover, it may be more suitable to use the equilibrium concentrations of volatile species instead of the total concentrations of VCs to estimate mass transfer coefficients, removal efficiency and flux. Experimental results also revealed that the choice of the pH of feed might be one of the most crucial factors for removing easily ionized VCs, such as ammonia, from water and wastewater.