Synthesis of Two Schiff Base Transition Metal Complexes Bearing Morpholine Side Chains and Kinetics of PNPP Catalytic Hydrolysis in Brij35 Micelle

Two Schiff base transitional metal complexes bearing morpholine side chains were synthesized and characterized, and were used as a simulative hydrolase in the catalytic hydrolysis of p‐nitrophenyl picolinate (PNPP) in this article. A mechanism of PNPP catalytic hydrolysis in the Brij35 micellar solution was proposed and supported by the results of the spectral analysis and the kinetic calculation. The kinetic model of PNPP catalytic hydrolysis was studied. The some kinetic and the thermodynamic constants on the catalytic reaction were calculated. The results of the study show that the metallomicelle made up of the Schiff base transitional metal complexes and Brij35 micelle revealed a good catalytic activity in PNPP catalytic hydrolysis; the rate of the PNPP catalytic hydrolysis is increased following the increase of the pH values in the buffer solution and affected by the polarization action of metal ion of complex.     

Adsorption of uranium from aqueous solution by graphene oxide nanosheets supported on sepiolite

Adsorptive behavior of uranium from aqueous solution on graphene oxide supported on sepiolite composites (GO@sepiolite composites) as a function of pH, ionic strength, temperature and initial uranium concentration was carried out by the batch techniques. GO@sepiolite composites was synthesized and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and potentiometric acid–base titration. According to XRD patterns and SEM images, the graphene oxide nanosheets were grafted on sepiolite surface successfully. The macroscopic results showed that the adsorption of uranium on GO@sepiolite composites was significantly depended on pH, whereas no effect of ionic strength on uranium adsorption at high pH and high ionic strength conditions was observed. The uptake equilibrium is best described by Langmuir adsorption isotherm, and the maximum adsorption capacity (Q_e) of GO@sepiolite composites at pH 5.0 and T = 298 K were calculated to be 161.29 mg/g. Thermodynamic results indicated that the adsorption of uranium on GO@sepiolite composites is the spontaneous and exothermic process.     

Analysis of operation mode of reflective twisted nematic liquid crystal display devices with rear film compensation

The rear film compensated reflective twisted nematic liquid crystal display device was studied in normally black and normally white operation conditions using a dynamic parameter space method. The electro-optical responses and reflectance spectra were also studied for different operation modes. A comparison was made between rear film and front film compensated reflective twisted nematic liquid crystal displays. We show that high quality normally white or normally black modes can be obtained by placing the fast axis of a quarter wave plate at 45° or 0° to the input director direction. The viewing angle characteristics of the optimum modes were also studied.     

Facile synthesis of gemini surface-active ATRP initiator and its use in soap-free AGET ATRP mini-emulsion polymerisation

A novel cationic gemini surfactant has been readily synthesised in 70 % total yield. The functional gemini surfactant can act both as an emulsifier and an atom transfer radical polymerisation (ATRP) initiator in mini-emulsion polymerisation of methyl methacrylate (MMA), in which no other emulsifier was required. 1-(Dimethylamino)dodecane (N,N-dimethyldodecylamine, DMDA) was found to be a good ligand in the activator generated by electron transfer (AGET) ATRP reaction. Kinetic studies indicated that the polymerisation featured controlled/living radical polymerisation.     

A quantum mechanics/molecular mechanics study on the hydrolysis mechanism of New Delhi metallo-β-lactamase-1

New Delhi metallo-β-lactamase-1 (NDM-1) has emerged as a major global threat to human health for its rapid rate of dissemination and ability to make pathogenic microbes resistant to almost all known β-lactam antibiotics. In addition, effective NDM-1 inhibitors have not been identified to date. In spite of the plethora of structural and kinetic data available, the accurate molecular characteristics of and details on the enzymatic reaction of NDM-1 hydrolyzing β-lactam antibiotics remain incompletely understood. In this study, a combined computational approach including molecular docking, molecular dynamics simulations and quantum mechanics/molecular mechanics calculations was performed to characterize the catalytic mechanism of meropenem catalyzed by NDM-1. The quantum mechanics/molecular mechanics results indicate that the ionized D124 is beneficial to the cleavage of the C–N bond within the β-lactam ring. Meanwhile, it is energetically favorable to form an intermediate if no water molecule coordinates to Zn2. Moreover, according to the molecular dynamics results, the conserved residue K211 plays a pivotal role in substrate binding and catalysis, which is quite consistent with previous mutagenesis data. Our study provides detailed insights into the catalytic mechanism of NDM-1 hydrolyzing meropenem β-lactam antibiotics and offers clues for the discovery of new antibiotics against NDM-1 positive strains in clinical studies.     

Synthesis of high molecular weight and narrow molecular weight distribution poly(acrylonitrile) via RAFT polymerization

Well‐defined polyacrylonitrile (PAN) of high viscosity‐average molecular weight (M_η = 405,100 g/mol) was successfully synthesized using reversible addition‐fragmentation chain transfer polymerization. The polymerization exhibits controlled characters: molecular weights of the resultant PANs increasing approximately linearly with monomer conversion and keeping narrow molecular weight distributions. The addition of 0.01 equiv (relative to monomer acrylonitrile) of Lewis acid AlCl₃ in the polymerization system afforded the obtained PAN with an improved isotacticity (by 8%). In addition, the influence of molecular weights and molecular weight distributions of PANs on the morphology of the electrospun fibers was investigated. The results showed that, under the same conditions of electrospinning, average diameter (247–1094 nm) of fibers increased with molecular weights of PANs, and it was much easier to get “uniform” diameter fibers while using PANs with narrow molecular weight distributions as the precursor of electrospinning. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Electrical properties of La0.6Ca0.4MnO3–Bi3.4Nd0.6Ti3O12 thin films derived by a sol–gel process

Magnetoelectric (ME) xLa_0.6Ca_0.4MnO₃–(1 ? x)Bi_3.4Nd_0.6Ti₃O₁₂ (LCMO–BNT) composite thin films have been prepared by a sol–gel process and spin-coating technique. The effects of LCMO content on the microstructure, leakage current density, ferroelectric properties, fatigue endurance and ME voltage coefficient of LCMO–BNT thin films derived by sol–gel method were studied. It was found that the composite thin films have better fatigue endurance properties and lower leakage current densities compared with pure BNT thin films, as well as large ME voltage coefficients.     

Fabrication of ZIF‐8@SiO2 Core–Shell Microspheres as the Stationary Phase for High‐Performance Liquid Chromatography

The unique features of high porosity, shape selectivity, and multiple active sites make metal–organic frameworks (MOFs) promising as novel stationary phases for high‐performance liquid chromatography (HPLC). However, the wide particle size distribution and irregular shape of conventional MOFs lead to lower column efficiency of such MOF‐packed columns. Herein, the fabrication of monodisperse MOF@SiO₂ core–shell microspheres as the stationary phase for HPLC to overcome the above‐mentioned problems is reported. Zeolitic imidazolate framework 8 (ZIF‐8) was used as an example of MOFs due to its permanent porosity, uniform pore size, and exceptional chemical stability. Unique carboxyl‐modified silica spheres were used as the support to grow the ZIF‐8 shell. The fabricated monodisperse ZIF‐8@SiO₂ packed columns (5 cm long × 4.6 mm i.d.) show high column efficiency (23 000 plates m^?1 for bisphenol A) for the HPLC separation of endocrine‐disrupting chemicals (bisphenol A, β‐estradiol, and p‐(tert‐octyl)phenol) and pesticides (thiamethoxam, hexaflumuron, chlorantraniliprole, and pymetrozine) within 7 min with good relative standard deviations for 11 replicate separations of the analytes (0.01–0.39, 0.65–1.7, 0.70–1.3, and 0.17–0.91 % for retention time, peak area, peak height, and half peak width, respectively). The ZIF‐8@SiO₂ microspheres combine the advantages of the good column packing properties of the uniform monodisperse silica microspheres and the separation ability of the ZIF‐8 crystals.     

From Nitro‐ to Sulfonyl‐Based Chromophores: Improvement of the Comprehensive Performance of Nonlinear Optical Dendrimers

Through the combination of the divergent and convergent approaches, coupled with the utilization of the powerful Sharpless “click‐chemistry” reaction, two series of sulfonyl‐based high‐generation NLO dendrimers were conveniently prepared with high purity and in satisfactory yields. Thanks to the perfect three‐dimensional (3D) spatial isolation from the highly branched structure and the isolation effect of the exterior benzene moieties and the interior triazole rings, these dendrimers exhibited large second harmonic generation coefficient (d₃₃) values up to 181 pm V^?1, which, to the best of our knowledge, is the highest value so far for polymers containing sulfonyl‐based chromophore moieties. Meanwhile, compared with the nitro‐chromophore‐based analogues, their optical transparency and NLO stability were improved in a large degree, due to the lower dipole moment (μ) and the special main‐chain structure of sulfonyl‐based chromophore in these dendrimers.     

Preparation of Unconventional Dendrimers that Contain Rigid NH?Triazine Linkages and Peripheral tert‐Butyl Moieties for CO2‐Selective Adsorption

Three unconventional dendrimers that contained rigid NH? triazine linkages and peripheral tert‐butyl moieties were prepared by using a convergent approach and characterized by ¹H and ¹³C NMR spectroscopy, mass spectrometry, and elemental analysis. Based on a thermogravimetric analysis study, these dendrimers were observed to display thermal stability at about 300 °C. The NH? triazine moiety, which possessed protonated and proton‐free nitrogen sites (like the imidazole unit), displayed the capture of polarizable CO₂ molecules through hydrogen‐bond and/or dipole–quadrupole interactions. In addition, the adsorption of various amounts of CO₂ and N₂ at different pressures suggests that the dendritic pores, which arise from the stacking of the middle co‐planar and rim protuberant dendrimers, G _n ‐N～N‐G _n (n=1–3), either swell or shrink at high pressure, thus indicating that these dendrimers may have a breathing ability.