Interfacial differences in enhanced schottky barrier height Au/n-GaAs diodes deposited at 77 K

The use of cryogenic temperatures (∼77 K) during Au Schottky contact deposition onto n-GaAs produces an increase in barrier height from 0.73 eV for room temperature diodes to 0.82 eV. Not all Schottky metals show this enhancement—for example Pt and Ti do not show any significant change in barrier height whereas Au, Pd and Ni show increases between 7 and 18%. We used X-ray reflectivity to show that the main difference between Au deposited at 77 K and room temperature is a decreased metal roughness while the interfacial roughness between the Au and GaAs is basically the same. As the diodes are annealed to 300 °C both the difference in barrier height and interfacial roughness is lost. This is a simple method with potential for improving the performance of GaAs metal-semiconductor-field-effect-transistors (MESFETs).     

Search for lepton flavor violation in the decay tau+/- --> mu+ gamma

A search for the nonconservation of lepton flavor number in the decay tau(+/-) --> mu(+/-) has been performed using 2.07 x 10(8) e(+ )e(-) tau(+) tau(-) events produced at a center-of-mass energy near 10.58 GeV with the BABAR detector at the PEP-II storage ring. We find no evidence for a signal and set an upper limit on the branching ratio of Beta(tau(+/-) --> mu(+/-) gamma) < 6.8 x 10(-8) at 90% confidence level.     

Limit on the B0-->rho0rho0 branching fraction and implications for the Cabibbo-Kobayashi-Maskawa angle alpha

We search for the decay B0-->rho(0)rho(0) in a data sample of about 227x10(6) Upsilon(4S)-->BB decays collected with the BABAR detector at the PEP-II asymmetric-energy e(+)e(-) collider at SLAC. We find no significant signal and set an upper limit of 1.1x10(-6) at 90% C.L. on the branching fraction. As a result, the uncertainty due to penguin contributions on the Cabibbo-Kobayashi-Maskawa unitarity angle alpha measured in B-->rhorho decays is decreased to 11 degrees at 68% C.L.     

Measurements of the branching fraction and CP-violation asymmetries in B0-->f0(980)K0S

We present measurements of the branching fraction and CP-violating asymmetries in the decay B0-->f0(980)K0S. The results are obtained from a data sample of 123 x 10(6) Upsilon(4S)-->BB decays. From a time-dependent maximum likelihood fit, we measure the branching fraction B(B0-->f0(980)(-->pi+pi-)K0)=(6.0+/-0.9+/-0.6+/-1.2)x10(-6), the mixing-induced CP violation parameter S=-1.62(+0.56)(-0.51)+/-0.09+/-0.04, and the direct CP violation parameter C=0.27+/-0.36+/-0.10+/-0.07, where the first errors are statistical, the second systematic, and the third due to model uncertainties. We measure the f0(980) mass and width to be mf0(980)=(980.6+/-4.1+/-0.5+/-4.0) MeV/c2 and Gammaf0(980)=(43(+12)(-9)+/-3+/-9) MeV/c2, respectively.     

Analysis of retroreflector-introduced spectrum distortion in birefringent crystal-based interleaver filters

Spectrum distortion in a birefringent crystal-based interleaver filter introduced by the right-angle total internal reflection retroreflector is studied. The phase shift between two perpendicularly polarized components of the polarized light incident onto the retroreflector is calculated. The sensitivity of the phase shift to the incident angle for different materials from which the retroreflector is made is also considered. This study indicates that the phase shift is less sensitive to the incident angle for retroreflectors having a higher index of refraction, suggesting a fixed-phase compensator that can be used to cancel out the phase shift introduced by the retroreflector to recover the interleaver filter's spectrum. The fold-back 50 GHz channel spacing birefringent crystal interleaver filter is fabricated to demonstrate that the spectrum distortion due to the phase shift introduced by retroreflector can be eliminated by a phase compensator.     

Observation of B-->eta'K* and evidence for B+-->eta'rho+

We present an observation of B-->eta'K*. The data sample corresponds to 232x10(6) BB[over ] pairs collected with the BABAR detector at the PEP-II asymmetric-energy B factory at the Stanford Linear Accelerator Center. We measure the branching fractions (in units of 10(-6)) B(B(0)-->eta'K*0)=3.8+/-1.1+/-0.5 and B(B+-->eta'K*+)=4.9(1.7)(+1.9)+/-0.8, where the first error is statistical and the second systematic. A simultaneous fit results in the observation of B-->eta'K* with B(B-->eta'K*)=4.1(-0.9)(+1.0)+/-0.5. We also search for B-->eta'rho and eta'f(0)(980)(f(0)-->pi+pi-) with results and 90% confidence level upper limits B(B+-->eta'rho+)=8.7(-2.8-1.3)(+3.1+2.3) (<14), B(B(0)-->eta'rho0)<3.7, and B(B(0)-->eta'f(0)(980)(f(0)-->pi+pi-))<1.5. Charge asymmetries in the channels with significant yields are consistent with zero.     

Addition,elimination, exchange,and epimerization in nitro sulfones

Three reactions were studied in the diastereomers of 1‐(benzenesulfonyl)‐2‐nitro‐1‐phenylpropane ( 1A and 1B ) and briefly in related compounds: elimination of the benzenesulfonyl group, epimerization of one diastereomer to the other, and deuterium/hydrogen exchange at the methine group next to nitro in starting material. The two diastereomers showed quite different reactivity. The high melting diasteromer showed rapid elimination and some exchange. The low melting diastereomer (at approximately a half‐life) showed extensive epimerization, and elimination to the alkene, but little exchange. There is little effect of aromatic substituents on reaction course. The situation is complicated by re‐addition of benzenesulfinate to the alkene. The addition reaction was similar to elimination in agreement with the Principle of Microscopic Reversibility expectations. An electron transfer mechanism for addition is calculated to be comparatively favorable. Copyright © 2007 John Wiley & Sons, Ltd.     

Signal-to-noise enhancement techniques for quantum cascade absorption spectrometers employing optimal filtering and other approaches

Optical feedback to the laser source in tunable diode laser spectroscopy (TDLS) is known to create intensity modulation noise due to elatoning and optical feedback (i.e. multiplicative technical noise) that usually limits spectral signal-to-noise (S/N). The large technical noise often limits absorption spectroscopy to noise floors 100-fold greater than the Poisson shot noise limit due to fluctuations in the laser intensity. The high output powers generated from quantum cascade (QC) lasers, along with their high gain, makes these injection laser systems especially susceptible to technical noise. In this article we discuss a method of using optimal filtering to reduce technical noise. We have observed S/N enhancements ranging from ∼20% to a factor of ∼50. The degree to which optimal filtering enhances S/N depends on the similarity between the Fourier components of the technical noise and those of the signal, with lower S/N enhancements observed for more similar Fourier decompositions of the signal and technical noise. We also examine the linearity of optimal filtered spectra in both time and intensity. This was accomplished by creating a synthetic spectrum for the species being studied (CH₄, N₂O, CO₂ and H₂O in ambient air) utilizing line positions and linewidths with an assumed Voigt profile from a commercial database (HITRAN). Agreement better than 0.036% in wavenumber and 1.64% in intensity (up to a 260-fold intensity ratio employed) was observed. Our results suggest that rapid ex post facto digital optimal filtering can be used to enhance S/N for routine trace gas detection. Received: 1 April 2002 / Revised version: 7 May 2002 / Published online: 21 August 2002 RID="*" ID="*"Corresponding author. Fax: +1-509/376-6066, E-mail: robert.disselkamp@pnl.gov     

Near-specular acoustic scattering from a buried submarine mud volcano

Submarine mud volcanoes are objects that form on the seafloor due to the emission of gas and fluidized sediment from the Earth's interior. They vary widely in size, can be exposed or buried, and are of interest to the underwater acoustics community as potential sources of active sonar clutter. Coincident seismic reflection data and low frequency bistatic scattering data were gathered from one such buried mud volcano located in the Straits of Sicily. The bistatic data were generated using a pulsed piston source and a 64-element horizontal array, both towed over the top of the volcano. The purpose of this work was to appropriately model low frequency scattering from the volcano using the bistatic returns, seismic bathymetry, and knowledge of the general geoacoustic properties of the area's seabed to guide understanding and model development. Ray theory, with some approximations, was used to model acoustic propagation through overlying layers. Due to the volcano's size, scattering was modeled using geometric acoustics and a simple representation of volcano shape. Modeled bistatic data compared relatively well with experimental data, although some features remain unexplained. Results of an inversion for the volcano's reflection coefficient indicate that it may be acoustically softer than expected.     

MASS TRANSFER EXPERIMENTS ON SINGLE IRREGULAR-SHAPED PARTICLES

Mass transfer from irregular-shaped naphthalene particles (100-200 inn in size) was studitd in an electrodynamic balance. Charged particles were suspended in an electrostatic field directly in line with a calibrated air jet. Mass and size change histories were obtained under ambient conditions, and under steady- and pulsed-flow conditions. For natural convection, the time-averaged Sherwood number was similar to that for spheres. Forced-convection Sherwood number under steady-flow conditions was strongly dependent on particle shape and panicle Reynolds number, and was consistently higher than values predicted for spheres at comparable Reynolds numbers. This study validates the technique and indicates the shape effect on mass transfer form single particles.