Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

Studies on metal — protein interactions: Inter-comparison among various approaches

Binding ability of mercury, thallium, lead and bismuth with Erythrina variegata seed protein have been investigated using tracer packet technique. Due to the lack of standard methods, inter-comparisons have been made among three different approaches, like trichloroacetic acid (TCA) precipitation, isoelectric precipitation and dialysis of protein after incubation with the metals. Good agreement was observed for all the cases except that of lead.     

Furan ring oxidation strategy for the synthesis of macrosphelides A and B

By using the convenient protocol for conversion of 2-substituted furans into 4-oxo-2-alkenoic acids ((i) NBS, (ii) NaClO(2)), macrosphelide B (2) was synthesized from furyl alcohol 5 (>98% ee) and acid 6 (99% ee). The protocol was first applied to the PMB ether of 5 to afford acid 13b. On the other hand, DCC condensation of acid 6 with 5 gave 16 after deprotection of the TBS group. Condensation was again carried out between 13b and 16 to furnish the key ketone 17, which upon reduction with Zn(BH(4))(2) afforded anti alcohol 18 stereoselectively (15:1). After protection/deprotection steps, the furan 18 was converted to seco acid 3 by using the furan oxidation protocol mentioned above, and lactonization of 3 with Cl(3)C(6)H(2)COCl, Et(3)N, and DMAP afforded 22 (MOM ether of 2), which upon deprotection with TFA produced 2. Transformation of 22 to macrosphelide A (1) was then investigated. Although the chelation-controlled reduction of 22 should afford the desired anti alcohol 24, Zn(BH(4))(2) at <-90 degrees C gave a 2 approximately 1:1 mixture of anti/syn alcohols. On the contrary, reduction with NaBH(4) in MeOH at -15 degrees C produced the syn isomer 23 with >10:1 diastereoselectivity. Mitsunobu inversion of the resulting C(14)-hydroxyl group and deprotection of the MOM group with TFA afforded 1. Similarly, reduction of 2 with NaBH(4) afforded the C(14)-epimer of 1 stereoselectively. The observed stereoselectivity in the reductions of 22 and 2 could be explained on the basis of computer-assisted calculation, which showed presence of the low-energy conformers responsible for the stereoselective reduction. In addition, conversion of 2 to 1 was established, for the first time.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Antistatic applications of conducting polyaniline

A method is described to impart flexibility and mechanical strength to conducting polyaniline by polymerizing aniline on fabrics and on cellulose papers. The study indicates that these conducting fabrics offer 16–18 dB of shielding effectiveness for the control of electromagnetic interference (EMI) up to a frequency of 10³ MHz.     

Spectroscopic and structural features of small thiocarbonyl molecules in low-lying excited states: Further applications of a variant of the orthogonal gradient method

Structural parameters of a set of five thiocarbonyl molecules in the lowest nπ* states are calculated by using a generalized orbital optimization algorithm (a variant of the orthogonal gradient method) in an INDO MCSCF framework. Transition energies, singlet-triplet splittings, planar inversion barriers, and dipole moments in nπ* states of different spin multiplicities are reported. Predicted structural features agree reasonably well with available experimental or theoretical data. Some interesting trends are noted in the computed inversion barrier heights, singlet-triplet splittings, and dipole moments in nπ* states.     

THE PHOTOREACTIVITY OF PYRIMIDINE-PURINE SEQUENCES IN SOME DEOXYDINUCLEOSIDE MONOPHOSPHATES AND ALTERNATING DNA COPOLYMERS

Abstract— A reversed-phase HPLC system has been developed which separates the common nucleo-bases from the 6-methylimidazo[4,5- b ]pyridin-5-one (6-MIP) produced on acid hydrolysis of a thymine-adenine photoadduct (TA*) that is formed between adjacent thymine and adenine bases in UV-irradiated polydeoxyribonucleotides. By measuring the relative amounts of adenine and 6-MIP in acid hydrolysates, this system has been used to investigate how polynucleotide conformation affects the yield of TA* in poly(dA-dT) irradiated at 254 nm. The photoreactivity of other pyrimidine-purine sequences has been examined with the deoxydinucleoside monophosphates d(TpI) and d(m⁵CpA) and with the alternating DNA copolymers poly(dA-dU), poly(dI-dC), poly(dG-dC) and poly(dA-dC).poly(dG-dT). Samples were irradiated at 254 nm in aqueous solution and in ice, and at wavelengths >290 nm with acetone as photosensitizer. A photoproduct resembling TA*, and giving 6-MIP on acid hydrolysis, was isolated from d(TpI) irradiated at 254 nm in solution or in ice; d(m⁵CpA) was comparatively unreactive. Acid hydrolysates of the irradiated DNA copolymers were screened by HPLC and by TLC and paper electrophoresis, for the presence of imidazo[4,5- b ]pyridin-5-one, 6-MIP, or other species attributable to specific photoproduct formation. By this criterion, however, none of the copolymers showed evidence of significant photoreactivity in either their single- or double-stranded conformational states. The formation of mixed pyrimidine-purine photoadducts in DNA is therefore probably restricted to T-A doublets.     

Growth of hair and the trace element profile a study by sectional analysis

Correlations between the growth of hair and the trace element profile have been investigated by non-destructive neuron activation analysis through gamma-ray speetrometry using NaI(Tl) as well as Ge(Li) detectors. After preliminary investigations to establish the experimental errors, the effect of washing procedures and in-person variations, hair samples belonging to ladies with known case histories, particularly with regard to dietary habits, health and profession, were examined. Scalp-hair samplex 50–100 cm in length, representing an average time span of ∼5–10 years were collected by combing. Samples in their non-anagen phase, differentiated by their roots, were analysed in 10 cm sections. The concentrations of the following elements were determined: Na, Cl, Mn, Co, Cu, Zn, As, Se, Ag, I, Au and Hg. Absolute values for the concentrations are reported for most of the elements, while for the rest relative values for the various sections are given. The values for the different sections vary by large factors for many elements although for some elements, like Cu and Mn, the variations are not appreciable. The unusually large concentrations of elements like Se ang Hg are in broad agreement with the case histories. However, detailed examination of the results with regard to time-dependent variations seem to pose serious problems in the applications to forensic science.     

Resolution method for overlapping peaks based on the fractional-order differential

Equations between the differential order and the maximum of the fractional-order differential for the specified peak signals are developed based on the variation of the maximum of the specified peak signals at different orders. Also, equations between the differential order and the zero-crossing of the fractional-order differential of the specified peak signals are proposed according to the variation of the zero-crossing of the specified peak signals at different orders. Characteristic paramters of the Gaus- sian peak, Lorentzian peak, and Tsallis peak can be estimated using estimator I and estimator II which are obtained by the equations above. As a result, a new method is presented to resolve the overlapped peaks signal. Firstly, a fractional-order differential of the specified peak signals is obtained with the fractional-order differentiation filter. Then, characteristic paramters of the specified peak signals can be extracted using estimator I and estimator II. Finally, the Tsallis peak is used as a model to assign the overlapping peak signals correctly. Experimental results show that the proposed method is efficient and effective for the simulated overlapping peaks and detected overlapping voltammetric peak signals.     

Growth of ramification-like ZnO rods in the presence of polyaniline

To obtain new materials with synergetic or complementary behaviors, polyaniline composite filled with ZnO rods in ramification-like structure was prepared by a hydrothermal approach. Comparative experiments of ZnO preparation in the presence of some metal ions were also carried out. The results indicated that the morphology of ZnO was strongly affected by the preparation condition. The method to grow ZnO rods in the presence of polyaniline offers a simple approach to obtain polyaniline composite filled with linear ZnO structure. The results of X-ray photoelectron spectroscopy show that the strong interaction between ZnO and polyaniline possibly exists to cause the charge transfer.