Characterization of glucoamylase immobilized on celite

Immobilization of glucoamylase (EC 3.2.1.3) on Celite R649 bio-catalyst carrier for hydrolysis of maltose and maltodextrin has been investigated in both packed bed and recirculated batch reactors. The kinetics parameters on the hydrolysis of maltose were estimated from the packed bed reactor. It is found that this immobilized enzyme is as efficient as the soluble enzyme in catalyzing hydrolysis of maltose. However, it is less efficient than the soluble enzyme in hydrolyzing 30% (w/v) maltodextrin, giving a maximum dextrose equivalent (DE) value of 96.0% instead of 98.2%.     

Aging of poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene)/toluene solutions and subsequent effects on luminescence behavior of cast films

Morphological effects in luminescence properties of a representative semiconducting polymer, poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV), has recently attracted much attention. Previous studies indicated that short-term heat treatment of solution-cast MEH-PPV films may result in the formation of mesomorphic order that is responsible for the "red" emission around 640 nm, in contrast to the single-chromophore "yellow" emission near 590 nm from the disordered matrix. On the basis of microscopic and spectroscopic evidence for films cast from freshly prepared and aged solutions, here we show that prolonged storage of MEHyellowPPV solutions at room temperature or lower may result in retardation of the thermally induced mesophase formation in the subsequently cast films. According to small-angle neutron scattering and differential scanning calorimetric observations over aged MEH-PPV/toluene solutions, we propose that the suppressed transformation into mesomorphic order is due to further development of nanocrystalline aggregates that serve as physical cross-links among MEH-PPV chains in the solution state upon long-term storage. These solvent-induced nanocrystalline aggregates, however, do not exhibit new spectroscopic features beyond the suppression of "red" emission at 640 nm from the mesomorphic phase.     

Production of 1,3-propanediol by Klebsiella pneumoniae

1,3-Propanediol (1,3-PD) has numerous applications from polymers to cosmetics, foods, lubricants, and medicines. Recently, there are strong industrial interests in a new kind of polyester, polytrimethylene terephthalate, with 1,3-PD as a monomer. This new polyester shows significant promise for use in carpeting and textiles. In this article we introduce a mild aerobic fermentation process using a strain screened from Klebsiella pneumoniae ATCC 25955, which is insensitive to oxygen, to produce 1,3-PD. We also describe a two-step fermentation process starting with glucose that was converted into glycerol with a glycerol-producing yeast, followed by K. pneumoniae that converts glycerol into 1,3-PD without intermediate isolation and purification of glycerol.     

Effects of pressure pulsation on oxygen transfer rate measured by sulfite method

Pressure pulsation (PP) was investigated for its effects on oxygen transfer rate (OTR) measured by sulfite oxidation. By manipulating airflow rate, 0.41–1.2 vvm, and a control valve in a 4-L bioreactor, the frequency of PP was varied at different gas pressures3–15 psig. A mathematical model of OTR was built and compared to experimental data. OTR was also examined at constant gas pressure, 4.5–15.0 psig. The results indicate a good agreement between measurement and model prediction. OTR above 9 psig during PP showed significant enhancement at 25°C. This proves that PP not only affects the elevation of DO level, but also increases the interfacial area and mass transfer coefficient.     

Design of broadband RF pulses with polynomial-phase response

The achievable bandwidth of common linear-phase RF pulses is limited by the maximum feasible B1 amplitude of the MR system. It has been shown previously, that this limitation can be circumvented by overlaying a quadratic phase in the frequency domain, which spreads the power across the pulse duration. Quadratic-phase RF pulses are near optimal in terms of achieving minimal B1max. In this work, it is demonstrated that further B1max reduction can be achieved by combining quadratic with higher-order polynomial-phase functions. RF pulses with a phase response up to tenth order were designed using the Shinnar-Le Roux transformation, yielding considerable increases in bandwidth and selectivity as compared to pure quadratic-phase pulses. These benefits are studied for a range of pulse specifications and demonstrated experimentally. For B1max = 20 microT and a pulse duration of 2.1 ms, it was possible to increase the bandwidth from 3.1 kHz for linear and 3.8 kHz for a quadratic to 9.9 kHz for a polynomial-phase pulse.     

Computational design of tetrahedral silsesquioxane-based porous frameworks with diamond-like structure as hydrogen storage materials

A novel type of three-dimensional (3D) tetrahedral silsesquioxane-based porous frameworks (TSFs) with diamond-like structure was computationally designed using the density functional theory (DFT) and classical molecular mechanics (MM) calculations. The hydrogen adsorption and diffusion properties of these TSFs were evaluated by the methods of grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations. The results reveal that all designed materials possess extremely high porosity (87–93 %) and large H₂ accessible surface areas (5,268–6,544 m² g^?1). Impressively, the GCMC simulation results demonstrate that at 77 K and 100 bar, TSF-2 has the highest gravimetric H₂ capacity of 29.80 wt%, while TSF-1 has the highest volumetric H₂ uptake of 65.32 g L^?1. At the same time, the gravimetric H₂ uptake of TSF-2 can reach up to 4.28 wt% at the room temperature. The extraordinary performances of these TSF materials in hydrogen storage made them enter the rank of the top hydrogen storage materials so far.     

Computer Simulation Study on Adsorption and Conformation of Polymer Chains Driven by External Force

In this work, Monte Carlo simulations are used to study the critical adsorption behaviors of flexible polymer chains under the action of an external driving force F parallel to an attractive flat surface. The critical adsorption temperature T_c decreases linearly with increasing F,indicating that the driving force suppresses the adsorption of polymer. The conformation of polymer is also affected by the driving force.However, the effect of F is dependent on the competition between the driving force and temperature. Under strong force or at low temperature,the polymer is stretched along the direction of the force, while under weak force or at high temperature, the polymer is not stretched. When the force is comparable to the temperature, the polymer may be stretched perpendicular to the driving force, and below T_c, we observe conformational transitions from parallel to perpendicular and again to parallel by decreasing the temperature. We found that the perpendicular stretched conformation leads the polymer chain to synchronously move along the direction of the driving force. Moreover, the conformational transitions are attributed to the competition and cooperation between the driving force and the temperature.     

8-羟基喹啉两亲配合物的LB膜及其电致发光器件研究

制备了两亲配体N-十六烷基-8-羟基-2-喹啉甲酰胺(HL)十个配合物的LB膜。采用π-A等温线和小角X射线衍射等方法研究了这些LB膜的性质和结构。两亲配合物的单分子占有面积为(1.25±0.06)nm^2和(0.75±0.06)nm^2,分别对应于两亲分子中两个喹啉环平躺和环与环之间以一定的角度倾斜于气/水界面。LB膜内分子排列是二维有序的超晶格结构,双层高度(5.0±0.1)nm;LB膜具有导电各向异性,其平面和垂直直流电导率分别为10^-^5S.m^-^1和10^-^9S.m^-^1;LB膜的高荧光性质使之可以用作为电致发光器件的发光材料。以LaL~2(H~2O)~4Cl的LB膜为发光层的单层电致发光器件的驱动电压为9V,发光亮度330cd/m^2,为黄绿色发光。