A three-step system calibration procedure with error compensation for 3D shape measurement

System calibration, which usually involves complicated and time-consuming procedures, is crucial for any three-dimensional （3D） shape measurement system based on vision. A novel improved method is proposed for accurate calibration of such a measurement system. The system accuracy is improved with considering the nonlinear measurement error created by the difference between the system model and real measurement environment. We use Levenberg-Marquardt optimization algorithm to compensate the error and get a good result. The improved method has a 50% improvement of re-projection accuracy compared with our previous method. The measurement accuracy is maintained well within 1.5% of the overall measurement depth range.     

Sudden death and revival of entanglement of two qubits coupled collectively to a thermal reservoir

In this paper, we investigate the entanglement of two qubits coupled collectively to a common thermal environment and find that the the collective decay can lead to a revival of the entanglement that has already been destroyed. We also show that the ability of the system to revival entanglement relies on the mean photon number of the thermal environment and the degree of entanglement of the initial state.     

掺铒的纳米相氟氧化物玻璃陶瓷的多光子红外量子剪裁

研究了掺铒的纳米相氟氧化物玻璃陶瓷(Er(3):FOV)的红外量子剪裁现象,测量了红外和可见的Er(3):FOV的荧光光谱.结果发现光激发²H_11/2能级的⁴ I_13/2→⁴I_15/2荧光跃迁的近似量子剪裁效率已达约186.28%.计算了有关的无辐射弛豫速率、自发辐射速率和能量传递速率,分析了有关的能量传递动力学过程,发现     

Tapered dielectric structure in metal as a wavelength-selective surface plasmon polariton focuser

Symmetric tapered dielectric structures in metal have demonstrated applications such as the nanofocusing of surface plasmon polaritons, as well as the waveguiding of V-channel polaritons. Yet the fabrication of smooth-surfaced tapered structure remains an obstacle to most researchers. We have successfully developed a handy method to fabricate metal-sandwiched tapered nanostructures simply with electron beam lithography. Though these structures are slightly different from conventional symmetric V-shaped structures, systematic simulations show that similar functionality of surface plasmon polariton nanofocusing can still be achieved. When parameters are properly selected, wavelength-selective nanofocusing of surface plasmon polaritons can be obtained.     

Thermal-induced nonlinear optical characteristics of ethanol solution doped with silver nanoparticles

The investigation of nonlinear optical characteristics of ethanol solution doped with is presented. A large thermal-induced third-order nonlinear refractive index up to silver nanoparticles 1.941× 10^-7 cm2/W is obtained from the mixed solution under 488-nm continue wave （CW） laser irradiation, which may result from surface plasmon resonance （SPR） enhancement effect of silver nanoparticles as well as high thermo-optic coefficient and low thermal conductivity of ethanol. Obvious spatial self-phase modulation and influence of thermal-induced negative lens effect are observed when a beam propagates through this solution, indicating promising applications such as optical limiting, beam flattening, and so on.     

点接触金属/Pr0.7Ca0.3MnO3/Pt结构稳定的低电流电阻开关特性

利用自主开发的导电原子力显微镜控制Pt,W探针构成点接触金属/Pr0.7Ca0.3MnO3(PCMO)/Pt三明治结构,对其电流-电压(I-V)及脉冲诱导电阻开关(EPIR)特性进行了研究.研究发现,在10 nA限流下两种电极对应结构的I-V都表现出相当稳定的双极性电阻开关特性,以及大于100的电阻开关比.进一步测试发现,点接触W/PCMO/Pt器件具有在10 nA限流下稳定的EPIR特性以及100 pA限流下重复的双极性电阻开关特性.此电流比已报道的电流低3个数量级,表明此结构在低功耗存储器件方面的潜在应用.通过对比样品不同位置、不同限流、不同接触面积点接触Pt/PCMO/Pt的I-V回滞特性,把点接触器件在低电流下稳定、显著的电阻开关效应归结于小的器件面积导致强的局域电场加强了O离子迁移效应.     

应用美学原理进行愉悦式教学的尝试

由于物理学的学习难度均较大,使学生学习完全处于被动状态,如何扭转此局面呢?愉悦式教法定能如愿。1 让学生充分领略学科的美 要学好物理,首先必须对它们产生兴趣.学科安排本身就是一种美,加之论述的逻辑     

共轴均匀带电薄圆盘间的相互作用力

本文利用静电场的高斯定律和环路定律巧妙地求出了均匀带电圆盘在空间任一点所产生的电场 ,进而计算出了共轴均匀带电薄圆盘之间的相互作用力     

与量子光场相互作用的运动原子的熵压缩

运用量子信息熵理论,研究了与量子光场相互作用的二能级运动原子的熵压缩,讨论了原子运动和场模结构对原子熵压缩的影响,并且比较了分别从基于信息熵测不准关系和海森伯测不准关系出发得出的结果,表明原子的运动导致了原子熵压缩的周期性演化;随着场模结构参量的增大,熵压缩的演化周期缩短,压缩时间延长;选择适当的系统参量,运动原子能够呈现长时间的持续熵压缩效应。当原子反转为零时,基于海伯堡测不准关系的方差压缩定义不再有效,而熵压缩实现了对原子压缩效应的高灵敏量度。     

Proton-exchanged optical waveguides fabricated by glutaric acid

In this paper, we first report that a new proton source, glutaric acid, has been used to fabricate optical waveguides in Z-cut lithium niobate crystals. The relationship was experimentally established between proton-exchanged (PE) waveguide parameters and fabrication conditions. It is shown that this new organic acid can be used to obtain deep PE waveguides in fast diffusion speed (0.275 μm²/h at 221°C) and with low loss (0.2 dB/cm). It provides an alternative approach for fabricating PE waveguides in lithium niobate substrate.