CuAPTPP-TDI-TiO2光催化微球的合成及其光催化性能 (cited: 1)

采用Adler法合成了5-(4-氨基苯基)-10,15,20-三苯基卟啉铜配合物(CuAPTPP),通过甲苯二异氰酸酯(TDI)的桥联作用对TiO₂微球进行表面修饰,使TDI分子中的两个活性TDI基团分别与TiO₂表面的羟基和CuAPTPP的氨基反应,将CuAPTPP敏化剂分子以化学键合的方式固定在TiO₂表面,形成光催化微球CuAPTPP-TDI-TiO₂．通过FT-IR、XRD、SEM、EA、UV-Vis和DRS等测试手段对CuAPTPP-TDI-TiO₂进行结构表征．讨论了桥联分子TDI修饰量对光催化微球性能的影响,确定了TDI与TiO₂的最佳摩尔比．以亚甲基蓝(MB)为降解对象,考察了CuAPTPP-TDI-TiO₂微球的可见光催化性能．结果表明,桥联分子TDI在CuAPTPP与TiO₂微球表面形成了牢固的化学键,复合微球在150 W氙灯辐照下降解10 mg/LMB溶液,120 min降解率可达98.7%,其降解率过程服从一级动力学规律,测得降解速率常数为5.1×10^-2 min^-1,半衰期为11.3 min．催化微球在回收4次的条件下,对MB的降解率仍保持在90%以上．     

类氢及碱金属原子激发态寿命的半经典计算公式

根据对应原理,得到了类氢原子能态平均寿命半经典的计算公式τ(n,l),然后利用相对论单通道量子数亏损理论进行推广,得到用来计算考虑总角动量J的激发态寿命公式τ(n,l,l+1/2)和τ(n,l,l-1/2),利用单通道量子数亏损理论得到了碱金属原子n、l远大于1时激发态寿命的半经典公式τ(n.l)=τ0(m+M/nm/v/+M)2v7l(l+1/2)/n4,其计算结果和实验数据符合的很好.     

True spin and pseudo spin entanglement around Dirac Points in graphene with Rashba spin–orbit interaction

We analytically obtained the Schmidt decomposition of the entangled state between the pseudo spin and the true spin in graphene with Rashba spin–orbit coupling. The entangled state has the standard form of the Bell state, where the SU(2) spin symmetry is broken. These states can be explicitly expressed as the superposition of two nonorthogonal, but mirror symmetrical spin states entangled with the pseudo spin states. Because of the closely locking between the pseudo spin and the true spin, it is found that the orbit curve in the spin-polarization parameter space for the fixed equi-energy contour around Dirac points has the same shape as the $\delta \overrightarrow{k}$-contour. Due to the spin–orbit coupling that cause the topological transition in the local geometry of the dispersion relation, the new equi-energy contours around the new emergent Dirac Points can be obtained by squeezing the one around the original Dirac point. The spin texture in the momentum space around the Dirac points is analyzed under the Rashba spin–orbit interaction and it is found that the orientation of the spin polarization at each crystal momentum $\overrightarrow{k}$ is independent of the Rashba coupling strength.     

基于回波平移序列的快速三维磁共振温度成像方法

高强度聚焦超声（HIFU）是一种无创的热消融疗法，为保证其安全性和有效性，需要一种精度高、速度快的测温方法在其治疗过程中对温度进行监控.基于质子共振频率位移（PRFS）的磁共振温度成像（MRT）对温度具有较高的灵敏度，且与温度具有良好的线性关系，因此常被用于引导HIFU治疗.然而在实际应用中，HIFU治疗的最大隐患在于可能造成表皮灼伤，并且灼伤区域可能与焦点区域相隔较远.因此MRT的监控范围十分重要.本文基于三维回波平移成像序列，结合可控混叠的空间并行成像技术，实现了时间分辨率为3 s的快速三维温度成像.为了验证该方法的精度，本文首先设计了仿体降温实验，利用光纤温度计验证回波平移序列测温的准确度和精确度.然后在室温条件下扫描离体猪肉组织，对比加速前后的MRT的测温精确度.在HIFU加热条件下扫描离体猪肉组织，对比加速前后的MRT的测温准确度.结果显示，本文提出的方法可以在3 s内完成三维温度精准测量，对于HIFU治疗的安全监控具有重要意义.     

Novel materials for bioanalytical and biomedical applications: Environmental response and binding/release capabilities of amphiphilic hydrogels with shape‐persistent dendritic junctions

The binding and release capabilities of a hydrogel series, constructed of hydrophilic poly(ethylene glycol) segments and hydrophobic dendritic junctions [poly (benzyl ether)s], are evaluated in aqueous media. The environmental response of the amphiphilic networks is also tested in water at three pH values: 1.5, 7.0, and 10.1. The highest swelling ratio is observed under acidic conditions and varies between 3.7 and 6.5, depending on the crosslinking density and dendrimer generation. Gel specimens with embedded indicators react within 3–6 s with a clear color switch to the change in the pH of the surrounding medium. The experiments with model anionic and cationic indicators and stains show that the hydrogels have basic interiors. The gel binding capabilities depend on the water solubility of the substrate and on the size of the incorporated dendritic fragments. Model release studies have been performed at 37 °C and pHs 1.5, 7.0, and 10.1. The observed phenomena are explained by the transformations in the structure and charge that both the networks and the model compounds undergo with the changes in the pH of the aqueous medium. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4017–4029, 2005     

Optimization of mobile phase for the determination of Esomeprazole and related compounds and investigation of stress degradation by LC–MS

In this study, the objective was to investigate the degradation behavior of Esomeprazole under different recommended stress conditions according to International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use [1] by HPLC. Our research showed that the effect of mobile phase species on separation was significant for the determination of Esomeprazole and its related compounds. Successful separation of the drug from its related impurities and degradation products formed under different stress conditions was achieved using ammonium acetate buffer/ACN by a gradient elution. Compared with phosphate buffer/ACN, ammonium acetate buffer/ACN under same pH and gradient showed a great improvement in resolution due to the change of elution order. The drug was subjected to stress conditions including acidic, alkaline, oxidative, photolytic, and thermal conditions. Extensive degradation occurred in acidic and oxidative conditions, while mild degradation was observed in alkaline and photolytic conditions. Besides, it turned out the drug was extremely stable under thermal condition. The stability‐indicating LC–UV method was validated with respect to linearity, precision, accuracy, specificity, and robustness. The LC–MS method was also adopted for the characterization of degradation products. Based on the m/z values and fragmentation patterns, the degradation pathway of the drug has been proposed.     

Theoretical Insights into Intermolecular Hydrogen-Bonding Strengthening in Fluorenone-Methanol Complexes Induced by Electronic Excitation and Bulk Solvent Effect

This work presents a theoretical insight into the variation of the site-specific intermolecular hydrogen-bonding （HB）, formed between C=O group of fluorenone （FN） and O-H groups of methanol （MeOL） molecules, induced by both the electronic excitation and the bulk solvent effect. Through the calculation of molecular ground- and excited-state properties, we not only demonstrate the characters of HB strengthening induced by electronic excitation and the bulk solvent effect but also reveal the underlying physical mechanism which leads to the HB variation. The strengthening of the intermolecular HB in electronically excited states and in liquid solution is characterized by the reduced HB bond-lengths and the red-shift IR spectra accompanied by the increasing intensities of IR absorption corresponding to the characteristic vibrational modes of the O-H and C--O stretching. The HB strengthening in the excited electronic states and in solution mainly arises from the charge redistribution of the FN molecule induced by the electronic excitation and bulk solvent instead of the intermolecular charge transfer. The charge redistribution of the solute molecule increases the partial dipole moment of FN molecule and the FN-MeOL intermolecular interaction, which subsequently leads to the HB strengthening. With the bulk solvent effect getting involved, the theoretical IR spectra of HBed FN-MeOL complexes agree much better with the experiments than those of gas-phase FN-MeOL dimer. All the calculations are carried out based on our developed analytical approaches for the first and second energy derivatives of excited electronic state within the time-dependent density functional theory.     

Highly selective synthesis of single-walled carbon nanotubes from methane in a coupled Downer-turbulent fluidized-bed reactor

For the synthesis of single-walled carbon nanotubes (SWCNTs) from CH₄ over a Fe/MgO catalyst, we proposed a coupled Downer-turbulent fluidized-bed (TFB) reactor to enhance the selectivity and yield (or production rate) of SWCNTs. By controlling a very short catalyst residence time (1–3 s) in the Downer, only part of Fe oxides can be reduced to form Fe nano particles (NPs) available for the growth of SWCNTs. The percentage of unreduced Fe oxides increased and the yield of SWCNTs decreased accordingly with the increase of catalyst feeding rate in Downer. SWCNTs were preferentially grown on the catalyst surface and inhibited the sintering of the Fe crystallites which would be formed thereafter in the downstream TFB, evidenced by TEM, Raman and TGA. The coupled Downer-turbulent fluidized-bed reactor technology allowed higher selectivity and higher production rate of SWCNTs as compared to TFB alone.     

New Cytotoxic Triterpenoids from the Aerial Parts of Euphorbia sieboldiana

Phytochemical investigation of the EtOH extract of Euphorbia sieboldiana led to the isolation of four new oleanane‐type triterpenoids, (1β,2α,3β,19β)‐1,2,3,19‐tetrahydroxyolean‐12‐en‐28‐oic acid, (1β,3β,19β)‐1,3,19‐trihydroxyolean‐12‐en‐28‐oic acid, (1β,2α,3β,16β,19β)‐1,2,3,16,19‐pentahydroxyolean‐12‐en‐28‐oic acid, and (1β,2α,3β,19β,23)‐1,2,3,19,23‐pentahydroxyolean‐12‐en‐28‐oic acid, along with 16 known compounds. Their structures were established by extensive 1D‐ and 2D‐NMR, as well as other spectral analyses. Biological evaluation of the four new triterpenoids revealed potent cytotoxic activities against HeLa and Hep‐G2 cells.     

Stereoselective Reactions of δ2-Isoxazoline Exo-azaenolates. A Model for Construction of the C-Ring of Sesbanimide A

A Stereoselective aldol reaction between bis(tert-butyldimethylsilyloxy) acetone and an isoxazoline-derived azaenolate is a key step in the construction of a C-ring model of sesbanimide A.