Uncommon ferromagnetic interactions in a homometallic Co(II) chain bridged by a single end-to-end azide

A new one-dimensional heterochiral coordination polymer [Co(bmdt)(N3)2].MeCN (1.MeCN) with well-isolated chains was prepared via a self-assembly process. Magnetic data show that intrachain ferromagnetic couplings via the single end-to-end azide group are observed, which is an extraordinary case among the azide-bridged Co(II) systems.     

An Immobilized‐Dirhodium Hollow‐Fiber Flow Reactor for Scalable and Sustainable C−H Functionalization in Continuous Flow

A scalable flow reactor is demonstrated for enantioselective and regioselective rhodium carbene reactions (cyclopropanation and C?H functionalization) by developing cascade reaction methods employing a microfluidic flow reactor system containing immobilized dirhodium catalysts in conjunction with the flow synthesis of diazo compounds. This allows the utilization of the energetic diazo compounds in a safe manner and the recycling of the dirhodium catalysts multiple times. This approach is amenable to application in a bulk‐scale synthesis employing asymmetric C?H functionalization by stacking multiple fibers in one reactor module. The products from this sequential flow–flow reactor are compared with a conventional batch reactor or flow–batch reactor in terms of yield, regioselectivity, and enantioselectivity.     

Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts

Methods for the hydrogenation of CO₂ into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO₂ into ethanol over non‐noble cobalt catalysts (CoAlO_x), presenting a significant advance for the conversion of CO₂ into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO₂ to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g^?1 h^?1. Operando FT‐IR spectroscopy revealed that the high ethanol selectivity over the CoAlO_x catalyst might be due to the formation of acetate from formate by insertion of *CH_x, a key intermediate in the production of ethanol by CO₂ hydrogenation.     

Antioxidant encapsulated porous poly(lactide-co-glycolide) microparticles for developing long acting inhalation system

The purpose of this study was to fabricate porous poly(lactide-co-glycolide) (PLGA) microparticles for efficient pulmonary deposition and increased therapeutic duration of the antioxidant anthocyanin (ATH). These microparticles were prepared by a water-in-oil-in-water (W(1)/O/W(2)) multi-emulsion method with vaporizing ammonium bicarbonate (AB) as a porogen and starch as a viscous additive. High porosity achieved by the decomposition reaction of AB to the base of ammonia, carbon dioxide, and water vapor at 50°C enabled efficient deposition of ATH throughout the entire lung in BALB/c mice. In addition, the porous microparticles incorporating starch showed sustained ATH release characteristics (up to 5 days) and protracted antioxidant activity (up to 5 days) for 2,2-diphenyl-1-pikryl-hydrazyl (DPPH) radicals, which was comparable to that of the porous microparticles without starch which completely released ATH in 2h. Furthermore, these porous microparticles incorporating starch led to longer ATH residence (up to 20 days) in in vivo lung epithelium. We believe that this system has great pharmaceutical potential as a long-acting antioxidant for continuously relieving oxidative stress in pulmonary diseases like chronic obstructive pulmonary disease (COPD).     

Control of on-off or off-on fluorescent and optical [Cu²⁺] and [Hg²⁺] responses via formal Me/H substitution in fully characterized thienyl "scorpionate"-like BODIPY systems

One 8-phenyl and two 8-mesityl-substituted "scorpionate"-like BODIPY-type species of the formula [3,4,4-tris(5-R-(2-thienyl))-8-(2,4,6-R'-phenyl)-4-bora-3a,4a-diaza-s-indacene (R = H, R' = H, 3a; R, = H, R' = Me, 2a; R, = Me, R' = Me, 2b)] have been synthesized and fully characterized. Importantly, differences in their solution (MeCN) optical Cu(2+) and Hg(2+) probing capacity via SSS-chelation were investigated. Compounds 2a-3a were prepared from the requisite 8-substituted BODIPY complexes. They were characterized first by complete (1)H, (11)B and (13)C NMR spectroscopic assignments (CD(3)Cl or CD(3)C(O)CD(3)); the molecular structures of 2a and 3a were determined by X-ray crystallography. Compounds 2a-3a were studied by UV-vis and fluorescence spectroscopy [Φ(F) = 0.27 ± 0.013 (2a); 0.024 ± 0.0016 (2b); 0.0034 ± 0.00047 (3a)]. Importantly, low [Cu(2+)] with 3a (<3.0 × 10(-5) M) gave rise to an increase of fluorescence intensity (off-on; 6.3-fold), whereas with 2a it decreased (on-off). When [Hg(2+)] (<3.0 × 10(-5) M) was added to 2b, the λ(em,max) value increased (off-on; 3.2-fold), and for 2a, it decreased (on-off). The association constant (K(a)) for Hg(2+)·2a was determined to be 3120 ± 307 M(-1). An approximate stoichiometric 1:1 binding determined by Job plot analysis is in line with successful DFT modeling of SSS-Cu(2+) binding for this system type. (1)H NMR spectroscopy also revealed tentative sets of product complex peaks. These simple differences caused by formal ligand Me-group incorporation are the first for any related fluorophores, to the best of our knowledge.     

Planar laser-induced fluorescence imaging in shock tube flows

The planar laser-induced fluorescence (PLIF) imaging method was used to perform flow visualization and quantitative planar thermometry in shock tube flow fields using toluene as a fluorescence tracer in nitrogen. Fluorescence quantum yield values needed to quantify PLIF images were measured in a static cell at low pressures (<1 bar) for various toluene partial pressures in nitrogen bath gas. Images behind incident and reflected shocks were taken in the core flow away from regions affected by boundary layers. Temperature measurements from these images were successfully compared with predicted values using ideal shock equations. Measured temperatures ranged between 296 and 800 K and pressures between 0.15 and 1.5 atm. The average temperature discrepancies between measurements and the predicted values behind the incident and reflected shocks were 1.6 and 3.6%, respectively. Statistical analyses were also conducted to calculate the temperature measurement uncertainty as a function of image resolution. The technique was also applied to the study of more complex supersonic flows, specifically the interaction of a moving shock with a wedge. Measured temperatures agreed well with the results of numerical simulations in all inviscid regions, and all pertinent features of the single Mach reflection were resolved.     

Synthesis and characterization of a fatty acid self-assembled monolayer on CeO2 nanoparticles: to explore solution-state property of a SAM

Decanoic acid self-assembled monolayer (SAM) in the quasi-crystalline state was prepared on the surface of the cubic CeO₂ nanoparticles (6.5 ± 1.1 nm) by hydrothermal synthesis. The purification method to obtain quasi-crystalline SAM without residual (free) decanoic acid was developed. The SAM was carefully washed (purified) and characterized carefully by FT-IR, TG, DSC, and NMR. The obtained results showed that good agreement with the property of the dry state SAM. The solution state properties of the SAM were also examined by the CeO₂ nanoparticles. It turned out that the quasi-crystalline SAM could be swollen by its good solvents, cyclohexane, and chloroform; however, the quasi-crystalline SAM showed that a size exclusion effect to the solvent, trans-decalin. In addition, it turned out that the molecular motion of the decanoic acids in the SAM was highly restricted even in the swollen state depending on the distance from the grafting point to the CeO₂ surface. The strong osmosis was also observed. The solvent molecules were not easily released from the SAM even after the solvent molecules outside of the SAM were frozen.     

Enhancement of Enzymatic Hydrolysis and Klason Lignin Removal of Corn Stover Using Photocatalyst-Assisted Ammonia Pretreatment

Photocatalyst-assisted ammonia pretreatment was explored to improve lignin removal of the lignocellulosic biomass for effective sugar conversion. Corn stover was treated with 5.0–12.5 wt.% ammonium hydroxide, two different photocatalysts (TiO₂ and ZnO) in the presence of molecular oxygen in a batch reactor at 60 °C. Various solid-to-liquid ratios (1:20–1:50) were also tested. Ammonia pretreatment assisted by TiO₂-catalyzed photo-degradation removed 70 % of Klason lignin under the optimum condition (12.5 % ammonium hydroxide, 60 °C, 24 h, solid/liquid?=?1:20, photocatalyst/biomass?=?1:10 with oxygen atmosphere). The enzymatic digestibilities of pretreated corn stover were 85 % for glucan and 75 % for xylan with NH₃-TiO₂-treated solid and 82 % for glucan and 77 % for xylan with NH₃-ZnO-treated solid with 15 filter paper units/g-glucan of cellulase and 30 cellobiase units/g-glucan of β-glucosidase, a 2–13 % improvement over ammonia pretreatment alone.