Hydrothermal Synthesis and Structure of a New 3D Lanthanide—Carboxylate Framework,[La（btec）1／2（H2btec）1／2（H2O）]n（H4btec=1,2,4,5—Benzeneteracarboxylic acid）

The title complex, [La(btec)_1/2(H₂btec)_1/2 (H₂O)]_n (H₄btec= 1, 2,4,5‐benzenetetracarboxylic acid) (1) was synthesized by the hydrothermal reaction of 1,2,4,5‐benzenetetracarboxylic dianhydride with La(NO₃)₃·6H₂O in H₂O, and crystallizes in the triclinic system, space group P‐1 with a = 0.64403(3) nm, b = 0.94500(4) nm, c = 0.96380(5) nm, a = 88.535(2)°, β = 100.314(2)°, γ = 76.6470(10)°, V = 1.60968(10) nm³, Z = 2, and final R = 0.0274, R_w = 0.0735. In 1, each La(m) ion is coordinated by eight oxygen atoms from six carboxylate groups and one coordinated water molecule. Two different coordination modes of H₄btec were present in the structure, one of which contains two protonated carboxylate groups to balance the charge.     

Creeping motion of an assemblage of composite spheres relative to a fluid

The sedimentation of a homogeneous distribution of spherical composite particles and the fluid flow through a bed of these particles are investigated theoretically. Each composite particle is composed of a spherical solid core and a surrounding porous shell. In the fluid-permeable porous shell, idealized hydrodynamic frictional segments are assumed to distribute uniformly. The effect of interactions among the particles is taken into explicit account by employing a fundamental cell-model representation which is known to provide good predictions for the motion of a swarm of nonporous spheres within a fluid. In the limit of a small Reynolds number, the Stokes and Brinkman equations are solved for the flow field in a unit cell, and the drag force exerted by the fluid on the particle is obtained in a closed form. For a distribution of composite spheres, the normalized mobility of the particles decreases or the particle interactions increase monotonically with a decrease in the permeability of their porous shells. The effect of particle interactions on the creeping motion of composite spheres relative to a fluid can be quite significant in some situations. In the limiting cases, the analytical solutions describing the drag force or mobility for a suspension of composite spheres reduce to those for suspensions of solid spheres and of porous spheres. The hydrodynamic behavior for composite spheres may be approximated by that for permeable spheres when the porous layer is sufficiently thick, depending on the permeability.     

On [Fe4S4]2+ -(mu2-SR)-M II bridge formation in the synthesis of an A-cluster analogue of carbon monoxide dehydrogenase/acetylcoenzyme A synthase

The construction of a synthetic analogue of the A-cluster of carbon monoxide dehydrogenase/acetylcoenzyme synthase, the site of acetylcoenzyme A formation, requires as a final step the formation of an unsupported [Fe(4)S(4)]-(mu(2)-SR)-Ni(II) bridge to a preformed cluster. Our previous results (Rao, P. V.; Bhaduri, S.; Jiang, J.; Holm, R. H. Inorg. Chem. 2004, 43, 5833) and the work of others have addressed synthesis of dinuclear complexes relevant to the A-cluster. This investigation concentrates on reactions pertinent to bridge formation by examining systems containing dinuclear and mononuclear Ni(II) complexes and the 3:1 site-differentiated clusters [Fe(4)S(4)(LS(3))L'](2-) (L' = TfO(-) (14), SEt (15)). The system 14/[{Ni(L(O)-S(2)N(2))}M(SCH(2)CH(2)PPh(2))](+) results in cleavage of the dinuclear complex and formation of [{Ni(L(O)-S(2)N(2))}Fe(4)S(4)(LS(3))]- (18), in which the Ni(II) complex binds at the unique cluster site with formation of a Ni(mu(2)-SR)(2)Fe bridge rhomb. Cluster 18 and the related species [{Ni(phma)}Fe(4)S(4)(LS(3))](3)- (19) are obtainable by direct reaction of the corresponding cis-planar Ni(II)-S(2)N(2) complexes with 14. The mononuclear complexes [M(pdmt)(SEt)]- (M = Ni(II), Pd(II)) with 14 in acetonitrile or Me(2)SO solution react by thiolate transfer to give 15 and [M(2)(pdmt)(2)]. However, in dichloromethane the Ni(II) reaction product is interpreted as [{Ni(pdmt)(mu(2)-SEt)}Fe(4)S(4)(LS(3))](2-) (20). Reaction of Et(3)NH(+) and 15 affords the double cubane [{Fe(4)S(4)(LS(3))}(2)(mu(2)-SEt)](3-) (21). Cluster 18 contains two mutually supportive Fe-(mu(2)-SR)-Ni(II) bridges, 19 exhibits one strong and one weaker bridge, 20 has one unsupported bridge (inferred from the (1)H NMR spectrum), and 21 has one unsupported Fe-(mu(2)-SR)-Fe bridge. Bridges in 18, 19, and 21 were established by X-ray structures. This work demonstrates that a bridge of the type found in the enzyme A-clusters is achievable by synthesis and implies that more stable, unsupported single thiolate bridges may require reinforcement by an additional covalent linkage between the Fe(4)S(4) and nickel-containing components. (LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-); L(O)-S(2)N(2) = N,N'-diethyl-3,7-diazanonane-1,9-dithiolate(2-); pdmt = pyridine-2,6-methanedithiolate(2-); phma = N,N'-1,2-phenylenebis(2-acetylthio)acetamidate(4-); TfO = triflate.).     

Determination of vitamin C and preservatives in beverages by conventional capillary electrophoresis and microchip electrophoresis with capacitively coupled contactless conductivity detection

The separation and detection of commonly used preservatives (benzoate, sorbate) and vitamin C by both conventional CE and microchip electrophoresis with capacitively coupled contactless conductivity detection is presented. The separation was optimized by adjusting the pH-value of the buffer and the use of hydroxypropyl-beta-CD (HP-beta-CD) and CTAB as additives. For conventional CE, optimal separation conditions were achieved in a histidine/tartrate buffer at pH 6.5, containing 0.025% HP-beta-CD and 0.1 mM CTAB. LOD ranged from 0.5 to 3 mg/L (S/N = 3) and the RSDs for migration time and peak area were less than 0.1 and 2%, respectively. A considerable reduction of analysis time can be accomplished by using microchip electrophoresis without significant loss in sensitivity under optimal separation conditions. A histidine/tartrate buffer at pH 6.5, incorporating 0.06% HP-beta-CD and 0.25 mM CTAB, gave detection limits ranging between 3 and 10 mg/L and satisfactory reproducibilities of < or =0.4% for the migration time and < or =3.5% for the peak area. The methods developed are useful for the quantitative determination of food additives in real samples such as soft drinks and vitamin C tablets.     

Substitution-Inert Metal Complex Mobile Phases in Non-Suppressed Cation Chromatography

Substitution-inert metal complexes, [Co(edda)(H₂O)₂]⁺, (Co(edda)(en)]⁺, [Co(edda)(dmen)]⁺, [Co(en)₂-(gly)]²⁺, [Co(en)₂(acac)]²⁺, and [Co(trien)(gly)]²⁺ in their nitrate salt solutions are used as eluents in nonsuppressed cation chromatography (where edda = ethylenediamine-N,N′-diacetic acid, en = ethylenediamine, dmen = N,N′-dime-thylethylenediamine, gly = glycine, acac = acetylacetone, and trien = triethylenetetraamine). It is found that all the mono- and di-valent charged complexes can be used to separate alkali and alkaline earth metal cations, respectively. The separations for monovalent cations are sometimes comparable to those using ultrapure HNO₃ solutions. However, the divalent Ca²⁺ and Sr²⁺ ions cannot be resolved using the metal complex eluents. On the other hand, a selected, direct non-suppressed IC separation of zinc(II) and cadmium(II) ions is demonstrated for the first time using a substitution-inert metal complex eluent and a conductivity detector. Comparisons of these eluents with those reported previously, i. e. HNO₃ and ethylenediammonium salt solution are made and explanations are proposed to account for the different selectivities observed where possible. The future development of this technique is also briefly discussed.     

Optimizing separation conditions for polycyclic aromatic hydrocarbons in micellar electrokinetic chromatography

We report the separation of polycyclic aromatic hydrocarbons (PAHs) using 0.1% poly(ethylene oxide) (PEO) in micellar electrokinetic chromatography (MEKC). In the presence of PEO, adsorption of PAHs on the capillary wall was reduced, leading to better resolution and reproducibility. Effects of tetrapentylammonium iodide (TPAI), dextran sulfate (DS), methanol, and sodium lauryl sulfate (SDS) on the separation of PAHs were elucidated. In terms of resolution and speed, DS, compared to TPAI, is a better additive for separation of PAHs. When using 0.1% PEO solution containing 45% methanol, 50 mM SDS, and 0.02% DS, separation of 10 PAHs containing 2 to 5 benzene rings was accomplished in less than 12 min at 15 kV in a commercial CE system. The method has also been tested for separating seven PAHs with high quantum yields when excited at 325 nm using a He-Cd laser. Unfortunately, separation of the seven PAHs was not achieved and sensitivity diminished under the same conditions. To optimize sensitivity, resolution and speed, a stepwise technique in MEKC has been proposed. The seven PAHs were resolved in 35 min at 15 kV when separation was performed in 0.1% PEO solution containing 35 mM SDS, 40% methanol and 0.02% DS for 2 min, and subsequently in 0.1% PEO solution containing 20 mM SDS, 50% methanol, and 0.02% DS.     

Two New Diterpenoids from Callicarpa pedunculata

Two new diterpenoids, pedunculatic acid A (= (4R,5α,7α)‐7‐ethoxy‐9β,13β‐dioxyabiet‐8(14)‐en‐18‐oic acid; 1 ) and pedunculatic acid B (= (4S,5α,12β)‐8β,14β‐epoxy‐12‐hydroxy‐11‐oxototaran‐19‐oic acid; 2 ), together with three known sesquiterpenoids, were isolated from the Chinese medicinal herb Callicarpa pedunculata R. Brown . Their structures were elucidated by spectroscopic analyses, including 1D‐ and 2D‐NMR, and by high‐resolution mass spectrometry.     

4,4′-二(硬脂酰胺基)二苯甲烷在乙烯基类单体中的分子组装及其结构形态研究

4,4′-二(硬脂酰胺基)二苯甲烷(BSDM)能在乙烯基类单体中进行聚集、自组装,并可使苯乙烯、丙烯酸丁酯、甲基丙烯酸甲酯、甲基丙烯酸-2-羟基乙酯等凝胶化,形成相应的分子凝胶.凝胶/溶胶相变温度(TGS)与BSDM浓度有关,BSDM质量分数越大,凝胶体系中分子间氢键和π-π键越多,要破坏它们所需要的能量越高,TGS因而也就越高.透射电镜表明,BSDM在各种可聚合溶剂中通过分子间相互作用形成类似纤维状的聚集体结构.BSDM在可聚合溶剂聚合前后的偏光显微照片表明,BSDM在体系中的晶型结构是球晶.     

Reactivity ratios for copolymerization of vinyl chloride with 2-methylpentyl vinyl brassylate by computerized linearization

A computerized version of the Fineman-Ross linearization procedure was used to determine reactivity ratios for copolymerization of vinyl chloride (monomer 1) and 2-methylpentyl vinyl brassylate (monomer 2). From differential refractometry data for the products of low-conversion copolymerization, the procedure gave r₁ = 1.06 and r₂ = 0.234. The ratios computed from chlorine contents of the same products were r₁ = 1.10 and r₂ = 0.239. The polarity factor (e₂) and general monomer reactivity (Q₂) calculated for monomer 2 from these ratios were, respectively, ?0.95 to ?0.98 and 0.032–0.033. The interquartile range for the copolymerization of a mixture of 60% monomer 1 and 40% monomer 2 was 1.4%. These values suggest that from suitable proportions of reactants, sufficiently homogeneous distribution of monomers can be achieved in copolymers of vinyl chloride and 2-methylpentyl vinyl brassylate to offer the possibility of effective internal plasticization.     

Tetracyclic triterpenoids from Melia azedarach, L.—III

From petroleum ether extracts of the bark of M. azedarach four novel tetracyclic triterpenoids have been isolated and characterized to be C₃₀ compounds of the euphane (20R) series. Previously known triterpenoids from Meliaceae have all been 20S compounds. Kulinone 1 is the first known euphane or tirucallane (20S) derivative oxygenated in the D ring; kulactone 2, kulolactone 3 and methyl kulonate 4 are additionally oxygenated in the side chain. Compounds 2 and 3 have a 2-oxa-trans-bicyclo[3,3,0]-octanone structure.