Processability characteristics of chlorinated poly(vinyl chloride)

Chlorinated poly(vinyl chloride) (CPVC) is known to have a higher softening temperature than conventional poly(vinyl chloride) (PVC). Its processability characteristics are, however, different; it has been reported that CPVC is more difficult to process. However, only limited information on the processability characteristics is available. This paper describes some studies of the flow behavior of CPVC melts in a capillary rheometer. The true melt viscosity and activation energy were determined between 190° and 210°C for a number of samples, and they appear to be related to the cohesive energy density of the samples. It was observed that melt fracture, i.e., gross distortion of the extrudate, occurs even at low shear rates in samples having a high chlorine content. This has been attributed to the relatively high pressures that have to be used, the pronounced non-Newtonian nature of the melt, and melt elasticity. It is postulated that melt elasticity could result from crosslinking at the site of the double bond which is known to be formed by dehydrochlorination.     

Holographic interferometry of non-sinusoidal vibrations

In this paper, the techniques of extended pulse stroboscopic holography and holographic subtraction have been applied to the study of periodic, non-sinusoidal vibrations represented by a Jacobian elliptic function. Fringe irradiance distribution in reconstructed images has been evaluated for the two cases. For this purpose we make use of an expression for the characteristic fringe function derived from considerations of the effect of motion on the coherence. It is shown that the above-mentioned techniques are more advantageous for the measurement of periodic, non-sinusoidal vibrations than in the case of pure sinusoidal vibrations.     

Pressure-induced structural phase transition and electronic properties of RESb (RE = Ho,Er and Tm) compounds: ab initio calculations

The structural phase transition and electronic properties at ambient (B ₁-phase) and high pressure (B ₂-phase) of heavy rare earth monoantimonides (RESb; RE?=?Ho, Er, and Tm) have been studied theoretically using the self-consistent tight binding linear muffin tin orbital method. These compounds show metallic behavior under ambient condition and undergo a structural phase transition to the B ₂ phase at high pressure. We predict a structural phase transition from the B ₁ to B ₂ phase in the pressure range 30.0–35.0?GPa. Apart from this, the ground state properties, such as lattice parameter and bulk modulus are calculated and compared with the available theoretical and experimental results.     

Untersuchungen über die diamagnetische Suszeptibilität einiger Organo (imino-oxy)silane

Diamagnetic susceptibilities of trimethyl(imino-oxy)silanes,Me ₃SiON CMeR, and dimethyldi(imino-oxy)silanes,Me ₂Si(ON CMeR)₂, containing Si–O bonds are reported. _M of these silicon compounds has been calculated theoretically from the method ofBaudet et al. and a good agreement has been obtained between the observed _M values and the corresponding calculated values. _Si in these compounds has been calculated graphically and the lower values have been explained on the basis of back-bonding to the silicon atom from the oxygen lone pair.     

Vibrational and electronic absorption spectra of 4-chloro 2-methyl, 4-chloro 3-methyl and 6-chloro 3-methyl phenols

The infrared spectra of 4-Cl 2-Me, 4-Cl 3-Me and 6-Cl 3-Me phenols have been recorded. The vibrational spectrum has been analysed assuming that the molecules belong toC _s point group and a tentative assignment of the observed frequencies to various modes of vibration has been proposed. The near ultraviolet absorption spectrum of these compounds has also been recorded. Assuming the transition to be electronically allowed the strongest band on the longer wavelength side has been assigned as the (0, 0) band in each case. The spectrum has been analysed in terms of several excited state frequencies which have been correlated with the ground state frequencies observed in the infrared spectrum.     

Diethylenetetra-ammonium sulphatocerate as volumetric reagent : Determination of organic derivatives of hydrazine by the iodine monochloride method

Diethylenetetra-ammonium sulphatocerate has been used as an oxidising agent in hydrochloric acid medium for the volumetric determination of semicarbazide hydrochloride, benzalazine, benzalsemicarbazone, aminoguanidme hydrochloride, chloralhydrazinc, P-methoxybcnzalsemicarbazonc, o-chlorobenzalsemicarbazone and acetonesemicarbazone, using iodine monochloride as a catalyst and preoxidiser Chloroform was used as an indicator. It was coloured violet owing to the liberation of iodine during the titration and became very pale yellow at the end-point owing to the formation of iodine monochloride Each hydrazino group in these compounds was oxidised quantitatively with a four-electron change to nitrogen with diethylenetctra-ammonium sulphatocerate as an Oxidant in hydrochloric acid solution.     

Bis-salicylaldehyde-ethylenediamine as an analytical reagent

Summary Copper has been determined gravimetrically as its bis-salicylaldehyde-ethylenediamine complex of the composition C₁₆H₁₄O₂N₂ · Cu, dried at 100–120° C. The complex is completely precipitated in theph range of 10.5–13.5, adjusted with ammonia or caustic alkali. It is stable in presence of excess ammonia, 0.1 N alkali, ammonium salts and complexing agents as tartrate, citrate, sodium-thiosulphate, fluoride, thiourea, triethanolamine and EDTA. In presence of tartrate and ammonia the ions of alkali metals, alkaline earths, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ and anions as VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3–, AsO₄ ^3– do not interfere. Ni²⁺ and Hg²⁺ are masked by tartrate, EDTA and ammonia; As³⁺, Sb³⁺ and Sn²⁺ are separated using fluoride as the complexing agent; at an alkalinity of 0.1 N caustic alkali in presence of tartrate As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ and Fe³⁺ are separated. Fe³⁺ can also be separated using triethanolamine as the masking agent at aph of about 13.0. Copper can be separated from almost all the ions, thus affording a highly selective method for the determination of copper.

---

Zusammenfassung Es wird eine gravimetrische Methode zur Bestimmung von Kupfer beschrieben, die auf der Bildung des Bis-salicylaldehyd-äthylendiaminkomplexes beruht. Dieser hat die Zusammensetzung C₁₆H₁₄O₂N₂ · Cu. Die Fällung wird imph-Bereich 10,5–13,5 (mit Ammoniak oder Alkalilauge eingestellt) vorgenommen und der Niederschlag bei 100°–120° C getrocknet. Der Komplex ist beständig in Gegenwart von überschüssigem Ammoniak, 0,1 n Alkali, Ammoniumsalzen sowie Tartrat, Citrat, Natriumthiosulfat, Fluorid, Thioharnstoff, Triäthanolamin und ÄDTA. In Gegenwart von Tartrat und Ammoniak stören nicht: Alkalien, Erdalkalien, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ sowie VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3– und AsO₄ ³⁺. Ni²⁺ und Hg²⁺ können mit Tartrat, ÄDTA und Ammoniak maskiert werden, As³⁺, Sb³⁺ und Sn²⁺ mit Fluorid. In 0,1 n ätzalkalischer Lösung in Gegenwart von Tartrat können As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ und Fe³⁺ abgetrennt werden. Fe³⁺ kann ebenfalls mit Triäthanolamin beiph 13,0 maskiert werden. Das beschriebene Verfahren erlaubt somit eine Abtrennung des Kupfers von fast allen anderen Ionen.

---

---

Part I: Singh, B. R., and S. Kumar: Z. analyt. Chem. 185, 211 (1962).