Highly regioselective synthesis of 3,4-disubstituted 1H-pyrrole

A highly regioselective method for the synthesis of 3, 4-disubstituted 1H-pyrroles has been developed employing the ipso-directing property of a trimethylsilyl group. As a key starting material in this study, the known 3,4-bis(trimethylsilyl)-1H-pyrrole (3), was protected with carefully chosen groups, namely tert-butoxycarbonyl, N,N-dimethylaminosulfonyl, p-toluenesulfonyl, and triisopropylsilyl. A highly regioselective monoiodination of these 1-protected pyrroles was achieved by reaction with iodine-silver trifluoroacetate at low temperatures. Subsequent palladium-catalyzed cross-coupling reactions afforded 1-protected-4-substituted 3-trimethylsilyl-1H-pyrroles, which again underwent further room-temperature ipso-iodination and palladium-catalyzed cross-coupling reactions to provide symmetrical and unsymmetrical 1-protected-3,4-disubstituted 1H-pyrroles. Deprotection of 1-(tert-butoxycarbonyl) and 1-(N, N-dimethylaminosulfonyl) groups was found to be nontrivial. The 1-(p-toluenesulfonyl) protecting group was eventually proved to be superior to other protection groups, because it was readily removed after stepwise ipso monoiodinations and palladium-catalyzed cross-coupling reactions.     

Determination of deoxynivalenol in cereals and cereal products by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the UK Food Standards Agency to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatographic (LC) method for the determination of deoxynivalenol in a variety of cereals and cereal products at proposed European regulatory limits. The test portion was extracted with water. The sample extract was filtered a applied to an immunoaffinity column. After being washed with water, the deoxynivalenol was eluted with acetonitrile or methanol. Deoxynivalenol was quantitated by reversed-phase LC with UV determination. Samples of artificially contaminated wheat-flour, rice flour, oat flour, polenta, and wheat based breakfast cereal, naturally contaminated wheat flour, and blank (very low level) samples of each matrix were sent to 13 collaborators in 7 European countries. Participants were asked to spike test portions of all samples at a range of deoxynivalenol concentrations equivalent to 200-2000 ng/g deoxynivalenol. Average recoveries ranged from 78 to 87%. Based on results for 6 artificially contaminated samples (blind duplicates), the relative standard deviation for repeatability (RSDr) ranged from 3.1 to 14.1%, and the relative standard deviation for reproducibility (RSDR) ranged from 11.5 to 26.3%. The method showed acceptable within-laboratory and between-laboratory precision for all 5 matrixes, as evidenced by HorRat values < 1.3.     

Direct functionalization of the cyclometalated 2-(2′-pyridyl)phenyl ligand bound to iridium(III)

Treatment of [Ir(ppy)₂(μ-Cl)]₂ and [Ir(ppy)₂(dtbpy)][OTf] (ppy = 2-(2′-pyridyl)phenyl; dtbpy = 4,4′-di-tert-butyl-2,2′-bipyridine; OTf = triflate) with pyridinium tribromide in the presence of Fe powder led to isolation of [Ir(4-Br-ppy)(μ-Br)]₂ (1) and [Ir(4-Br-ppy)₂(dtbpy)][OTf] (2), respectively. Pd-catalyzed cross-coupling of 2 with RB(OH)₂ afforded [Ir(4-R-ppy)₂(dtbpy)][OTf] (R = 4′-FC₆H₄ (3)), 4′-PhC₆H₄ (4), 2′-thienyl (5), 4′-C₆H₄CH₂OH (6). Treatment of 4 with B₂(pin)₂ (pin = pinacolate) afforded [Ir{4-(pin)B-ppy}₂(dtbpy)][OTf] (7). The alkynyl complexes [Ir(4-PhCC-ppy)₂(dtbpy)][OTf] (8) and [Ir{4-Me₂(OH)CC-ppy}(4-Br-ppy)(dtbpy)][OTf] (9) were prepared by cross-coupling of 2 with PhCCSnMe₃ and Me₂C(OH)CCH, respectively. Ethynylation of [Ir(fppy)₂(dtbpy)][OTf] (fppy = 5-formyl-2-(2′-pyridyl)phenyl) with Ohira’s reagent MeCOC(N₂)P(O)(OEt)₂ afforded [Ir{5-HCC-ppy}₂(dtbpy)][OTf] (10). The solid-state structures of 2, 5, 7, and 10 have been determined.     

Domino allylation and cyclization of ortho-alkynylbenzaldehydes with allyltrimethylsilane catalyzed by Pd(II)-Cu(II) bimetallic systems

The reaction of ortho-alkynylated benzaldehydes 1 with allyltrimethylsilane under the Pd(OAc)₂-CuCl₂ catalyst system gave the isochromene derivatives 2 together with the chlorinated products 3. When the reaction was conducted in the presence of half equiv of H₂O, the formation of 3 was suppressed and 2 was obtained in good to high yields. When the reaction of 1a was carried out with trimethylsilylcyanide instead of allylsilane, the cyano group-substituted isochromene 9 was obtained in 94% yield.     

Simple interface for capillary electrophoresis-inductively coupled plasma atomic emission spectrometry

A simple interface has been developed to couple capillary electrophoresis (CE) to inductively coupled plasma atomic emission spectrometry (ICP-AES) for metal speciation. A concentric glass nebulizer with elongated tip is used as the CE-ICP interface. The CE capillary is the central tube of the nebulizer. A platinum wire is wrapped across the exit end of the CE capillary to provide electrical connection to the CE power supply. No sheath flow of buffer solution is needed. A simple cooling system has also been developed. A peristaltic pump circulates water through a plastic tube that encloses the section of the CE capillary between the CE instrument and the ICP spectrometer. Characteristics of the CE-ICP interface, e.g., elution time, nebulization and transport efficiency and peak broadening, versus carrier gas flow-rate have been studied. Comparisons to a previous design with the Pt electrode inserted into the end of the CE capillary are made where appropriate. The reproducibility (RSD) in ICP emission intensity of the system is <4%. Detection limits of Cr and Cu are approximately 5 ng/ml.     

X-Ray Structure and Proton NMR Study of a Hexacoordinated Lithium Complex

The structure of the lithium complex with1,3,5-tris[oxymethylene(N,N-dicyclohexyl)carboxyamido]cyclohexanehas been determined by the X-ray method.The compound is triclinic, space group P¯1,a = 15.623(3), b = 19.279(4),c = 19.295(4)Å = 102.32(3), = 92.45(3), = 105.67(3)0, V = 5436(2)Å3, Z = 4. Itscomposition is represented by the formulaC48H82N3O6LiI 0.5H2O. The lithium cationis encapsulated in a polar pseudo-cavity of six oxygen atoms of the ligandmolecule and displays a distorted trigonal prism coordination. The conformationof the ligand in the solid state complex has been compared with the conformationof the complex in solution determined by 1H-NMR measurements.Supplementary data relevant to this publication have been deposited with the British Library, No. SUP 82224 (21 pages).     

Characterization and epitope mapping of two monoclonal antibodies against human CD99

CD99 plays a critical role in the diapedesis of monocytes, T cell differentiation, and the transport of MHC molecules. Engagement of CD99 by agonistic monoclonal antibodies has been reported to trigger multifactorial events including T cell activation as well as cell-cell adhesion during hematopoietic cell differentiation. In this study, to identify the functional domains participating in the cellular events, we mapped the epitopes of CD99, which are recognized by two agonistic CD99 monoclonal antibodies, DN16 and YG32. Using recombinant fusion proteins of GST with whole or parts of CD99, we found that both antibodies interact with CD99 molecules independently of sugar moieties. DN16 mAb detected a linear epitope located in the amino terminal region of CD99 while YG32 mAb bound another linear epitope in the center of the extracellular domain. To confirm that the identified epitopes of CD99 are actually recognized by the two mAbs, we showed the presence of physical interaction between the mAbs and the fusion proteins or synthetic peptides containing the corresponding epitopes using surface plasmon resonance analyses. The dissociation constants of DN16 and YG32 mAbs for the antigen were calculated as 1.27 x 10(-7) and 7.08 x 10(-9) M, respectively. These studies will help understand the functional domains and the subsequent signaling mechanism of CD99.     

The Effect of Alkane Chain Length on the Liquid–Liquid Critical Temperatures of Oligostyrene/Linear-Alkane Mixtures

Summary. Upper critical solution temperatures (UCSTs) for liquid–liquid demixing in a set of mixtures of linear alkanes (pentane (N ₁=5) to pentacontane (N ₁=50)) with an oligostyrene (1241amu, N ₂=12) are reported. We find strong correlation between the Hildebrand solubility parameters of the alkanes and the UCST. Correlations are developed which enable predictions concerning the miscibility of mixtures of compounds with longer chains.