Femtosecond fiber-feedback optical parametric oscillator

We demonstrate what is to our knowledge the first synchronously pumped high-gain optical parametric oscillator (OPO) with feedback through a single-mode fiber. This device generates 2.3-2.7 W of signal power in 700-900-fs pulses tunable in a wavelength range from 1429 to 1473 nm. The necessary high gain was obtained from a periodically poled LiTaO(3) crystal pumped with as much as 8.2 W of power at 1030 nm from a passively mode-locked Yb:YAG laser with 600-fs pulse duration and a 35-MHz repetition rate. The fiber-feedback OPO setup is compact because most of the resonator feedback path consists of a standard telecom fiber. Because of the high parametric gain, the fiber-feedback OPO is highly insensitive to intracavity losses. For the same reason, the synchronization of the cavity with the pump laser is not critical, so active stabilization of the cavity length is not required.     

Target detection by an echolocating harbor porpoise (Phocoena phocoena)

Two echolocation experiments are described. They were conducted on the same harbor porpoise housed in a sea pen, one year apart at Neeltje Jans, The Netherlands. The aims were to determine the target detection ability of an echolocating harbor porpoise, with the ultimate goal to predict the distance at which harbor porpoises can detect fishing nets. In experiment 1, the maximum distance at which the 3-year-old porpoise could detect a 7.62-cm diameter water-filled stainless-steel sphere by echolocation was determined psychophysically. The 50%-current detection threshold was reached when the sphere was at a distance of 26 m from the porpoise's rostrum. In experiment 2, conducted a year later, the maximum detection distance for a 5.08-cm water-filled stainless-steel sphere was 15.9 m. The target strengths of both targets were measured using simulated harbor porpoise echolocation signals and the results, coupled with transmission-loss calculations, indicated that the echo levels received by the porpoise with the targets at the threshold ranges in the two experiments were only 1.3 dB apart. Together with information on the target strengths of various fishing nets, the results of the present study can be used to predict the distance at which the nets can be detected by harbor porpoises.     

Cyano-Carbonates (II) -Eficient Iatent Acyl Carbanious in 1,4-Additions

Alkylations of cyano-carbonate anions with ethyl acrylate or methyl vinyl ketone followed by hydrolysis yield 1,4-addition products in excelleat yields.     

Synthesis of Gold Microplates Using Bovine Serum Albumin as a Reductant and a Stabilizer

Gold microplates were synthesized in aqueous solutions by reducing HAuCl₄ with the hydroxyl groups in both serine and threonine of bovine serum albumin (BSA), which is a globular protein in its native state. In this article, we systematically investigated the effects of temperature, pH value, the concentration of BSA, and ionic species on the reduction kinetics and thus the size and morphology of the final product. The optimal experimental conditions for producing uniform Au microplates include the following: an elevated temperature in the range of 55–65 °C, an acidic solution with pH≈3, and the presence of NaCl (0.14 M ). We found that if any one of these parameters was deviated from the optimal condition, Au microplates would not be formed in high yields. We also found that the surfaces of the as‐synthesized Au microplates were covered by a dense array of BSA bumps.     

Durable Mesenchymal Stem Cell Labelling by Using Polyhedral Superparamagnetic Iron Oxide Nanoparticles

Small polyhedral superparamagnetic iron oxide (SPIO) nanoparticles (<10 nm) coated with a thin layer of silica were prepared (SPIO@SiO₂ and SPIO@SiO₂‐NH₂). Surface modification of the small polyhedral silica‐coated SPIO nanoparticles with amines led to substantially higher mesenchymal stem cell (MSC) labelling efficiency without the use of additional transfecting agents. Therefore, amine surface‐modified nanoparticles (SPIO@ SiO₂‐NH₂) appeared to be the preferred candidate for MSC labelling. In vitro studies demonstrated that controlled labelling of SPIO@SiO₂ and SPIO@SiO₂‐NH₂ did not cause MSC death or proliferation inhibition. MSCs labelled with SPIO@SiO₂‐NH₂ nanoparticles retained differentiation potential and showed osteogenic, adipogenic and chondrogenic differentiations. The noncytotoxic polyhedral SPIO@SiO₂‐NH₂ nanoparticle‐labelled MSCs were successfully implanted in rabbit brain and erector spinae muscle, and demonstrated long‐lasting, durable MRI labelling efficacy after 8–12 weeks.     

Ce0.6Zr0.35Y0.05O2和Pr0.6Zr0.35Y0.05O2催化剂表面上CO氧化和18O-16O交换反应的研究

测定了在Ce0.6Zr0.4O2,Ce0.6Zr0.35Y0.05O2,Pr0.6Zr0.4O2和Pr0.6Zr0.35Y0.05O2 (分别表示为CZ,CYZ,PZ和PYZ)样品表面上的CO氧化反应和18O-16O 同位素交换反应.结果表明: 在CZ和PZ系列固熔中掺杂Y3 离子可以改善晶格氧的迁移速度;PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.其原因是将Y3 掺杂到Ce0.6Zr0.4O2 或Pr0.6Zr0.4O2晶格中,增加了样品的氧空位浓度,从而提高了晶格氧的迁移性质,而PrOx比CeO2具有更低温度的氧化还原性质,因此PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.     

Dual Esterase‐ and Steroid‐Responsive Energy Transfer Modulation of Ruthenium(II) and Rhenium(I) Complex Functionalized Gold Nanoparticles

A number of adamantane‐containing ruthenium(II) and rhenium(I) complexes have been synthesized, characterized, and noncovalently functionalized with β‐cyclodextrin‐capped gold nanoparticles (β‐CD–GNPs) through the host–guest interaction between cyclodextrin and adamantane. The resultant nanoconjugates have been characterized by transmission electron microscopy (TEM), energy‐dispersive X‐ray analysis (EDX), and 2D ROESY ¹H NMR experiments. The Förster resonance energy transfer (FRET) properties of the nanoconjugates can be modulated by both esterase‐accelerated hydrolysis and competitive displacement of steroid, by monitoring the emission intensity and luminescence lifetime. The FRET efficiencies are found to vary with the nature of the chromophores and the length of the spacer between the transition metal complexes and the GNPs. This work constitutes a “proof‐of‐principle” assay method for the dual‐functional detection of important classes of biomolecules, such as enzymes and steroids.     

光电催化二氧化碳还原研究进展

CO_2是最常见的化合物,作为潜在的碳一资源,可用于制备多种高附加值的化学品,如一氧化碳、甲烷、甲醇、甲酸等。传统的热催化转化CO_2方法能耗高,反应条件苛刻。因此,如何在温和条件下高效地将CO_2转化成高附加值的化学品,一直以来是催化领域的研究热点和难点之一。光催化技术反应条件温和、绿色环保。然而,纯光催化反应普遍存在太阳能利用效率有限,光生载流子分离效率低等问题。针对上述问题,在光催化的基础上引入电催化,可以提高载流子的分离效率,在较低的过电位下,实现多电子、质子向CO_2转移,从而提高催化反应效率。总之,光电催化技术可以结合光催化和电催化的优势,提高CO_2催化还原反应效率,为清洁、绿色利用CO_2提供了一种新方法。本文依据光电催化CO_2还原反应基本过程,从光吸收、载流子分离和界面反应等三个角度综述了光电催化反应的基本强化策略,并对未来可能的研究方向进行了展望。     

Crystal structures and chemistry of double perovskites Ba2M(II)M′(VI)O6 (M=Ca, Sr, M′=Te, W, U)

Structures of the double perovskites Ba₂M(II)M ′(VI)O₆ (M=Ca, Sr, M′=Te, W, U) at room temperature have been investigated by the Rietveld method using X-ray and neutron powder diffraction data. For double perovskites with M=Sr, the observed space groups are I2/m (M′ =W) and (M′=Te), respectively. In the case of M=Ca, the space groups are either monoclinic P2₁/n (M′=U) or cubic (M′=W and Te). The tetragonal and orthorhombic symmetry reported earlier for Ba₂SrTeO₆ and Ba₂CaUO₆, respectively, were not observed. In addition, non-ambient X-ray diffraction data were collected and analyzed for Ba₂SrWO₆ and Ba₂CaWO₆ in the temperature range between 80 and 723 K. It was found that the rhombohedral structure exists in Ba₂SrWO₆ above room temperature between the monoclinic and the cubic structure, whereas the cubic Ba₂CaWO₆ undergoes a structural phase transition at low temperature to the tetragonal I4/m structure.