Electron bombardment fragmentation of size selected molecular clusters

(CO₂) _n , (NO) _n and (NH₃) _n clusters are generated in a supersonic molecular beam and size selected by scattering from an He beam. By measurements of angular dependent mass spectra, TOF distributions and the angular dependence of the scattered signal quantitative information on the fragmentation probability by electron impact is derived. The van der Waals systems (CO₂) _n and (NO) _n appear only at masses which are simply multiples of the monomer mass. The preferred cluster ion is the monomer ion for all investigated cluster sizes withn=2 to 4. The fragment pattern for the quasi-hydrogen bonded (NH₃) _n -cluster shows, beside a large number of fragment masses, a preference for protonated ions. The results are explained in terms of simple models based on the structural change from the neutral to the ionized configuration and the fragmentation pattern of the monomer followed by ionmolecule reactions.     

Experiments in Solving Mixed Integer Programming Problems on a Small Array of Transputers

The time-consuming process of solving large-scale Mixed Integer Programming problems using the branch-and-bound technique can be speeded up by introducing a degree of parallelism into the basic algorithm. This paper describes the development and implementation of a parallel branch-and-bound algorithm created by adapting a commercial MIP solver. Inherent in the design of this software are certain ad hoc methods, the use of which are necessary in the effective solution of real problems. The extent to which these ad hoc methods can successfully be transferred to a parallel environment, in this case an array of at most nine transputers, is discussed. Computational results on a variety of real integer programming problems are reported.     

Effect of film thickness on the electro-reduction of molecular oxygen on electropolymerized cobalt tetra-aminophthalocyanine films

We studied the electrocatalytic activity of cobalt tetra-aminophthalocyanine (CoTAPc) for the reduction of molecular oxygen (O₂) on adsorbed monomeric and on electropolymerized films of different thicknesses on glassy carbon (GC) electrode. The polymeric films, denoted poly-CoTAPc, were first characterized by electrochemical impedance spectroscopy and it appears that the types of phenomena revealed to be occurring depend less on the film thickness in basic than in acid media. For O₂ reduction, the results showed that poly-CoTAPc is more active than the monomeric CoTAPc adsorbed on GC. Indeed, rotating ring-disk electrode data showed that polymeric CoTAPc promotes the four-electron reduction of O₂ to water in parallel to a two-electron reduction to give peroxide. On monomeric and thin films of poly-CoTAPc, a two-electron reduction mechanism predominates. In basic media the activity increases very slightly with thickness, whereas in acid media this increase is more pronounced. This parallels the observed behavior revealed by electrochemical impedance spectroscopy.     

Sorption of uranium by non-living water hyacinth roots

Summary Many studies have shown that water hyacinth (Eichhornia crassipes) roots can be used to accumulate high concentrations of organic as well as inorganic pollutants. They are currently used to remediate aquatic environments and aqueous solutions. In the present study, sorption of uranium from aqueous solutions by using dried roots of water hyacinth has been investigated. The sorption of uranium was examined as a function of initial concentration, pH, weight of roots and contact time. Five different concentrations 20, 40, 60, 80, and 100 μg ^. ml^-1 were used. Sorption proves to be very rapid and depend on pH, weight of roots and concentration of uranium. Maximum sorption capacity of water hyacinth roots was 64,000 U⁶⁺ μg/g. The sorption of uranium by water hyacinth roots follows a Langmuir isotherm.     

Novel Catalytic Dielectric Barrier Discharge Reactor for Gas-Phase Abatement of Isopropanol

Catalytic gas-phase abatement of air containing 250 ppm of isopropanol (IPA) was carried out with a novel dielectric barrier discharge (DBD) reactor with the inner catalytic electrode made of sintered metal fibers (SMF). The optimization of the reactor performance was carried out by varying the voltage from 12.5 to 22.5 kV and the frequency in the range 200–275 Hz. The performance was significantly improved by modifying SMF with Mn and Co oxide. Under the experimental conditions used, the MnO _x /SMF showed a higher activity towards total oxidation of IPA as compared to CoO _x /SMF and SMF electrodes. The complete destruction of 250 ppm of IPA was attained with a specific input energy of ∼235 J/L using the MnO _x /SMF catalytic electrode, whereas, the total oxidation was achieved at 760 J/L. The better performance of the MnO _x /SMF compared to other catalytic electrodes suggests the formation of short-lived active species on its surface by the in-situ decomposition of ozone.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Numeric simulation of epoxy cure in molds

Thermodynamic and kinetic parameters have been determined suitable for the numerical simulation of the curing reaction of the epoxy/anhydride based casting resin system Araldite CY 225/HY 225/filler. In particular, the decisive role of the heating rate on the evaluation of the kinetic parameters from dynamic DSC-experiments is discussed.

---

Zusammenfassung Mit Hilfe der Mikrokalorimetrie wurden thermodynamische (Reaktionsenthalpien) und kinetische (Arrhenius-Konstanten, Reaktionsordnung) Parameter eines gefüllten Epoxid/Anhydrid-Giessharz-Systems (Araldit CY 225/HY 225/Quarzmehl) bestimmt.Die Eignung dieser Parameter zur praxisrelevanten Simulation der HÄrtungsreaktion in Giessformen wird demonstriert. Es zeigt sich, dass die Heizrate im dynamischen DSC-Experiment bei der Bestimmung der kinetischen Parameter eine entscheidende Rolle spielt.

---

---

We wish to thank Dr. P. Bujard, Ciba-Geigy SA, for the measurement of the thermal conductivity data, and Mrs. Emmi Stoisser for technical assistance.     

Untersuchungen an oxidischen Katalysatoren. XLII. Redoxverhalten des Nickels in NiNa?Y-Zeolithen 4. Einfluß der Zusammensetzung auf die Reduzierbarkeit von Nickel in NiNa?Y-Zeolithen

Studies on Oxide Catalysts. XLii. Redox Behaviour of Nickel in Zeolites NiNa? Y. 4. Influence of Composition on the Reducibility of Nickel in Zeolites NiNa? Y By chemical analysis (reaction with K₂Cr₂O₇) and ESCA investigations we determined the degree of reduction in reduced samples NiNa-Y as function of the mole ratio SiO₂/Al₂O₃ (module), of the Ni²⁺ degree of exchange and the kind of the second cations. (NH₄₊, Ca²+, Co²+, and Nd³+) in the temperature region of 620–770 K. The degree of nickel reduction increases with increasing module, decreasing degree of exchange and decreasing number of Brönsted acidic centres. This behaviour is caused by the influence of the interaction between cations Ni²⁺ and zeolite lattice on the reduction equilibrium.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.