Determination of ganglioside composition and structure in human brain hemangioma by chip-based nanoelectrospray ionization tandem mass spectrometry

We report here on a preliminary investigation of ganglioside composition and structure in human hemangioma, a benign tumor in the frontal cortex (HFC) in comparison to normal frontal cortex (NFC) tissue using for the first time advanced mass spectrometric methods based on fully automated chip-nanoelectrospray (nanoESI) high-capacity ion trap (HCT) and collision-induced dissociation (CID). The high ionization efficiency, sensitivity and reproducibility provided by the chip-nanoESI approach allowed for a reliable MS-based ganglioside comparative assay. Unlike NFC, ganglioside mixture extracted from HFC was found dominated by species of short glycan chains exhibiting lower overall sialic acid content. In HFC, only GT1 (d18:1/20:0), and GT3 (d18:1/25:1) polysialylated species were detected. Interestingly, none of these trisialylated forms was detected in NFC, suggesting that such components might selectively be associated with HFC. Unlike the case of previously investigated high malignancy gliosarcoma, in HFC one modified O-Ac-GD2 and one modified O-Ac-GM4 gangliosides were observed. This aspect suggests that these O-acetylated structures could be associated with cerebral tumors having reduced malignancy grade. Fragmentation analysis by CID in MS² mode using as precursors the ions corresponding to GT1 (d18:1/20:0) and GD1 (d18:1/20:0) provided data corroborating for the first time the presence of the common GT1a and GT1b isomers and the incidence of unusual GT1c and GT1d glycoforms in brain hemangioma tumor.      

Translocation of radioactivity from substrate to macromycetes in the Crucea (Romania) uranium mining area

The present study follows the extent of translocation radioactivity from the substrates of the Crucea uranium mining area to the macromycetes spontaneously occurred during June–October 2008. To this end, radioactivity measurements (gross α + β and ¹³⁷Cs) on both macromycetes and their substrates were made. The resultants obtained were confirmed by FT-IR spectroscopy, evidencing the presence of characteristic bands around of 910 cm⁻¹, corresponding to the asymmetric stretching vibration of the uranyl unit and to the interaction between the UO₂ ²⁺ ions and the group belonging to various cellular components.     

Porphyrin deposition induced by UV irradiation

Simple irradiation by UV light of porphyrin TpyP and its zinc(II) and manganese(III) metal derivatives in chlorinated solvents leads to the deposition on silica of mesoscale aggregates. The process is due to the photochemical decomposition of the solvent with generation of HCl, which causes the precipitation of a protonated form. The morphology of the resulting objects is driven by the nature of the inserted metal ion.     

Regioselective one-pot synthesis of 9-alkyl-6-chloropyrido[3,2-e][1,2,4]triazolo[4,3-a]pyrazines. Reactivity of aliphatic and aromatic hydrazides

[reaction: see text] The one-pot synthesis of new 9-alkyl-6-chloropyrido[3,2-e][1,2,4]triazolo[4,3-a]pyrazines has been achieved. Hydrazides regioselectively reacted as nucleophiles with the 3-chloro substituent of 2,3-dichloropyrido[2,3-b]pyrazine. An intramolecular cyclization afforded the tricycle nonxanthine adenosine receptor antagonists.     

Phosphorprotein intermediate in the Ca2+-dependent ATPase reaction of macrophage plasma membrane.

ATPase activity and phosphorylation by [gamma-32P] ATP of isolated plasma membrane of alveolar macorphages are stimulated in a parallel fashion by physiologic concentrations of Ca2+, with half-maximal activating effect of this ion at (3--7) X 10(-7) M. For various membrane preparations, a direct proportionality exists between Ca2+-dependent ATPase activity and amount of 32P incorporated. Labeling of membrane attains the steady-state level by 10 sec at 0 degrees C, and is rapidly reversed by adenosine diphosphate (ADP), K+ decreases the amount of membrane-bound 32P, mainly by enhancing the rate of dephosphorylation of the 32P-intermediate. Hydroxylamine causes a release of about 90% of 32P bound to the membrane, thus indicating that the 32P-intermediate contains an acyl-phosphate bond. When the labeled plasma membrane is solubilized and electrophoresed on acrylamide gels in the presence of sodium dodecyl sulphate, the radioactivity appears to be largely associated with a single protein fraction of 132,000 +/- 2,000 aarent molecular weight. These features of the macrophage Ca2+-ATPase suggest that the enzyme activity might be part of a surface-localized Ca1+-extrusion system, participating in the regulation of Ca2+-dependent activities of the macrophage.     

To what extent can cyclometalation promote associative or dissociative ligand substitution at platinum(II) complexes? A combined kinetic and theoretical approach

The ligand exchange rate constants for the reactions [Pt(bph)(SR2)2] + 2*SR2 --> [Pt(bph)(*SR2)2] + 2SR2 (bph = 2,2'-biphenyl dianion; R = Me and Et) and cis-[PtPh2(SMe2)2] + 2*SMe2 --> cis-[PtPh2(*SMe2)2] + 2SMe2 have been determined in CDCl3 as a function of ligand concentration and temperature, by 1H NMR isotopic labeling and magnetization transfer experiments. The rates of exchange show no dependence on ligand concentration and the kinetics are characterized by largely positive entropies of activation. The kinetics of displacement of the thioethers from [Pt(bph)(SR2)2] with the dinitrogen ligands 2,2'-bipyridine and 1,10-phenanthroline (N-N) to yield [Pt(bph)(N-N)], carried out in the presence of sufficient excess of thioether and N-N to ensure pseudo-first-order conditions, follow a nonlinear rate law k(obsd) = a[N-N]/(b[SR2] + [N-N]). The general pattern of behavior indicates that the rate-determining step for substitution is the dissociation of a thioether ligand and the formation of a three-coordinated [Pt(bph)(SR2)] intermediate. The value of the parameter a, which measures the rate of ligand dissociation, is constant and independent of the nature of N-N, and it is in reasonable agreement with the value of the rate of ligand exchange at the same temperature. Theoretical ab initio calculations were performed for both [Pt(bph)(SMe2)2] and cis-[PtPh2(SMe2)2], and for their three-coordinated derivatives upon the loss of one SMe2 ligand. The latter optimize in a T-shaped structure. Calculations were performed in the HF approximation (LANL2DZ basis set) and refined by introducing the correlation terms (Becke3LYP model). The activation enthalpies from the optimized vacuum-phase geometries are 52.3 and 72.2 kJ moll compared to the experimental values in CDCl3 solution, 80 +/- 1 and 93 +/- 1 kJ mol(-1) for [Pt(bph)(SMe2)2] and cis-[PtPh2(SMe2)2], respectively. The electrostatic potential maps of both parent compounds show a remarkable concentration of negative charge over the platinum atom which exerts a repulsion force on an axially incoming nucleophile. On the other hand, the strength of the organic carbanions trans to the leaving group and the stabilization of the T-shaped intermediate in the singlet ground state may also rationalize the preference for the dissociative mechanism. All of the kinetic and theoretical data support the latter hypothesis and indicate, in particular, that dissociation from the complex containing the planar 2,2'-biphenyl dianion is easier than from its analogue with single aryl ligands. Electron back-donation from filled d orbitals of the metal to empty pi* of the in-plane cyclometalated rings is weak or absent and is not operative in promoting an associative mode of activation.     

Radiofrequency plasma beam deposition of various forms of carbon based thin films and their characterization

The characteristics of carbonic materials obtained by downstream deposition in a low pressure argon plasma beam injected with acetylene are reported. The influence of substrate temperature, presence of Ni catalyst and hydrogen in gas composition on the material properties is described. By increasing the substrate temperature, an enhanced order in the material is revealed by Raman spectroscopy, while FTIR measurements show a decreasing of the hydrogen content and the disappearing of sp¹ hybridized carbon in the deposit. The SEM and Raman investigation show a clear tendency of crystalline phases formation when hydrogen is assisting the deposition.     

Analysis of Bulk and Interface Phenomena in CdTe/CdS Thin-Film Solar Cells

CdTe layers have been grown on CdS layers to produce thin-film photovoltaic devices. Because of the large lattice mismatch of roughly 10%, CdTe and CdS can only be joined at the expense of a high density of misfit dislocations. Additionally, after deposition the CdTe layer contains submicrometer sized, [111] oriented, columnar grains with a high density of stacking faults and microtwins resulting in a poor electrical performance of the p-n junction. The performance of these cells can be improved by depositing a CdCl₂ layer on the CdTe absorber layer and subsequent annealing of the stack in air. This treatment induces interdiffusion of S and Te across the interface, which results in a better lattice match. During this anneal, CdTe is subject to grain growth, recovery and recrystallization. In samples annealed for different durations after different amounts of CdCl₂ were applied, grain growth is completed during the first minutes of annealing. Subsequent diffusion of Cl is detected along the CdTe grain boundaries. The presence of Cl enhances the recrystallization of the CdTe layer, starting from the CdTe surface, while recovery of the CdTe layer, mostly by the reduction of microtwins, takes place at the interface. The simultaneous occurrence of recrystallization and recovery leads to a preferred alignment of grain boundaries in CdTe parallel to the interface. Electron beam induced current measurements show the detrimental effect of these grain boundaries on the charge carrier collection efficiency of the cell. Based on these results, a modified growth procedure is proposed.     

Capillary electrophoretic analysis of sulfur and cyanicides speciation during cyanidation of gold complex sulfidic ores

A capillary electrophoretic protocol for the separation and quantification of the most important species potentially liberated during the cyanidation of gold sulfide‐rich ores was accomplished in this study. The separation of 11 ions: S₂O₃^2–, Cu(CN)₃^2–, Fe(CN)₆^4–, Fe(CN)₆^3–, SCN^–, Au(CN)₂^–, Ag(CN)₂^–, SO₄^2–, OCN^–, SO₃^2–, and HS^– was achieved using an indirect UV detection method. The robustness of the analytical protocol was tested by analyzing ions speciation during the cyanidation of two gold sulfide‐rich ores. The 1‐h cyanidation of the two ores released up to six complexes into solution: S₂O₃^2–, Cu(CN)₃^2–, SCN^–, Fe(CN)₆^4–, OCN^–, and SO₄^2–. The mineralogy of the ore was found to influence directly the nature and the amount of the dissolved species. Conserving the cyanidation solution for 72 h after sampling resulted in 96% total sulfur recovery. These results allow us to conclude that the analytical protocol developed in this study can become very useful for the optimization of precious‐metals cyanidation plants.