Nitrogen and water adsorption in aluminum methylphosphonate alpha: a molecular simulation study

We present here Monte Carlo simulation and experimental results on the adsorption of nitrogen and water in aluminum methylphosphonate polymorph alpha (AlMePO-alpha). We have assumed a detailed atomic model for the material, using experimental information to construct the simulation cell. Nitrogen was modeled with two different approaches: as a simple Lennard-Jones (LJ) sphere with no charges, and as a diatomic molecule with charges explicitly included. Water was represented by the TIP4P model. Experimental adsorption isotherms were used to tune the proposed molecular model for the adsorbent. Simulated adsorption capacities were in agreement with the experimental results obtained for the studied systems. The influence of the surface model on the adsorption behavior was taken into account by considering different values of the surface methyl group size parameter. Our results corroborate the strong sensitivity of the simulation results to this parameter, as previously observed by Schumacher and co-workers. It is also observed that charged models are essential to accurately describe the low-pressure region of the adsorption isotherm, where the solid-fluid interaction rules the system behavior. However, a simple uncharged molecular model for nitrogen is able to describe the three loci arrangement at maximum loading. Experimental and simulation results presented here also confirm the low water affinity of AlMePO-alpha. These results enforce the application of this methodology to achieve quantitative predictions on similar systems, with the appropriate transferability of the molecular parameters.     

Inelastic neutron scattering study of water in hydrated LTA-type zeolites

The vibrational dynamics of water molecules encapsulated in synthetic Na-A and Mg-exchanged A zeolites were studied versus temperature by inelastic neutron scattering (INS) measurements (30-1200 cm(-1)) as a function of the induced ion-exchange percentage by using the indirect geometry tof spectrometer TOSCA at the ISIS pulse neutron facility (RAL, UK). The experimental INS spectra were compared with those of ice Ih to characterize the structural changes induced by confinement on the H2O hydrogen-bonded network. We observed, after increasing the Mg2+ content, a tendency of water molecules to restore the bulklike arrangements together with more hindered dynamics. These results are confirmed by the analysis of the evaluated one-phonon amplitude-weighted proton vibrational density of states aimed, in particular, to follow the evolution of the water molecules librational mode region.     

Validation of two analytical methods for the determination of ochratoxin A by reversed-phased high-performance liquid chromatography coupled to fluorescence detection in musts and sweet wines from Andalusia

Some Spanish sweet wines are made from raisins, grapes dried by direct exposure to the sun after picking. This drying process can encourage ochratoxin A (OTA) formation. OTA is a mycotoxin formed by several fungi. It has been linked to nephropathy in humans, and may have a long half-life in humans. The aim of this study is to develop and to apply two procedures for the analysis of OTA in grape musts (during the raisining process) and sweet wines, respectively. Reversed-phase high-performance liquid chromatography (RP-HPLC) coupled to fluorescence detection (FLD) was employed in both analytical methods. In grape must, the method involves the direct injection of the sample in a HPLC-FLD system without any kind of prior clean-up procedure. The complexity of the sweet wine samples requires a solid-phase extraction (SPE) clean-up on a C18 column which enables the OTA to be isolated from the matrix. The methods used were statistically validated. The validation also included the comparison of the slopes of the curve obtained with standards and the regression curves obtained by the addition of a standard. Two different studies of standard additions were conducted. One method was validated without sample preparation and it was applied to must samples. The other method was validated with SPE extraction and it was applied to sweet wine samples. Recovery was always better than 89.69%. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) were established at 0.22 and 0.77 μg l⁻¹, respectively. In general, the analytical data obtained provided good results at the sub-μg l⁻¹ concentration level.     

Determination of trihalomethanes in soil matrices by simplified quick,easy, cheap,effective, rugged and safe extraction and fast gas chromatography with electron capture detection

A method based on QuEChERS extraction is proposed for the determination of trihalomethanes (chloroform, bromodichloromethane, dibromocloromethane and bromoform) in soil samples. The new version of QuEChERS adapted to soil samples consists of liquid extraction with ethyl acetate, the addition of water to moisten the samples, salting-out partitioning of the water with anhydrous MgSO₄, and direct injection of the organic extract, obtained after the centrifugation step, into the gas chromatograph. This simplified extraction procedure maintains the advantages of the original method and avoids some steps, making the final procedure simpler, faster, and cheaper, with the consequent reduction in errors associated with sample manipulation. The experimental conditions of the analytical method, based on fast gas chromatography (FGC) and micro-electron capture detection (μECD), were optimized. The column and oven program used allowed fast separation of the compounds in less than 4 min and the total analysis cycle time was as short as 10 min. The existence of a matrix effect was checked and the analytical conditions of the method were studied in a fortified garden soil sample. The highly sensitive and selective detector used afforded to detection limits in the order of ng/kg for the target compounds. To validate the proposed method two certified reference materials (CRMs) were analyzed.     

Rapid Determination of Simple Polyphenols in Grapes by LC Using a Monolithic Column

The development of a rapid, reliable and reproducible LC method for the determination and quantification of 13 polyphenols (gallic acid, protocatechuic aldehyde, gentisic acid, catechin, vanillinic acid, caffeic acid, vanillin, epicatechin, syringaldehyde, p-coumaric acid, ferulic acid, sinapic acid and resveratrol) in grapes and derived products is reported. The polyphenols were separated in less than 8 min. Employed was an RP-18e (100 mm × 4.6 mm) monolithic type column. A gradient method with the following solvents was utilised for the chromatographic separation: A: 90% water, 2% acetic acid in methanol, and B: 90% methanol, 2% acetic acid in water. Two detectors in series were employed: a UV–Vis detector and a fluorescence excitation/emission detector. Influence of temperature (15–40 °C) and solvent flow rate (2–5 mL min^?1) on the separation were studied, and 25 °C and 2.5 mL min^?1 were found to be the optimum conditions. The relative standard deviations of the resulting peak areas, for both intra- and inter- experiments, were less than 2.4 and 2.6%, respectively. Finally, the developed method has been utilised for the quantification of the polyphenols in real samples.     

A single chiroptical spectroscopic method may not be able to establish the absolute configurations of diastereomers: dimethylesters of hibiscus and garcinia acids

Electronic circular dichroism (ECD), optical rotatory dispersion (ORD), and vibrational circular dichroism (VCD) spectra of hibiscus acid dimethyl ester have been measured and analyzed in combination with quantum chemical calculations of corresponding spectra. These results, along with those reported previously for garcinia acid dimethyl ester, reveal that none of these three (ECD, ORD, or VCD) spectroscopic methods, in isolation, can unequivocally establish the absolute configurations of diastereomers. This deficiency is eliminated when a combined spectral analysis of either ECD and VCD or ORD and VCD methods is used. It is also found that the ambiguities in the assignment of absolute configurations of diastereomers may also be overcome when unpolarized vibrational absorption is included in the spectral analysis.     

Determination of catechins by means of extraction with pressurized liquids

The technique of extraction with pressurized liquids is applied for extraction of catechin and epicatechin in tea leaves and in grape seeds. The extracts obtained are then analyzed by HPLC. A comparison has been made of the recoveries obtained employing extraction by magnetic stirring, ultrasound-assisted extraction, and extraction with pressurized liquids. In the three extraction systems, four different pure solvents were utilized, namely water, methanol, ethanol, and ethyl acetate. Methanol produced the best results. For this comparison, an initial step was to check the stability of catechins during the process of extraction using pressurized liquids at high temperature (100-200 degrees C). It has been confirmed that recoveries of these two compounds begin to fall, to below 95%, at 130 degrees C and above. Pressurized liquid extraction using methanol as solvent, produces results, in terms of recovery of catechin and of epicatechin, notably higher than any of the other conditions of extraction tested. The duration of the extraction cycle was also evaluated and re-extractions were performed to ensure the full recovery from the samples. It was found that, forcatechin, the R.S.D. of the method is 3.21%, and for epicatechin the R.S.D. was 2.96% (n = 5). The final optimized pressurized liquid extraction method allows for the determination of catechin and epicatechin in diverse types of samples with a rapid (10 min) and reproducible method.     

The effect of 2-hydroxypropyl-β-cyclodextrin on the excited triplet state of promazine and chlorpromazine

Chlorpromazine hydrochloride (CPZ) is a widely used anti-psychotic drug that induces skin photosensitization and photoallergy response after systematic use or topical applications. The photoallergic mechanism is still unknown. However, it has been proposed that the triplet excited state (³CPZ*) could participate in the photodamaging effects. In this work, we report the photophysical properties of the triplet excited state of CPZ and its parent derivative promazine hydrochloride (PZ) in the presence of 2-hydroxypropyl-β-cyclodextrin (HPC). Absorption measurements indicate that PZ and CPZ form an inclusion complex with HPC through a 1:1 stoichiometry. The equilibrium constant at 25 °C is (2.55 ± 0.09) × 10³ M⁻¹ and (3.27 ± 0.07) × 10³ M⁻¹ for PZ and CPZ, respectively. The CPZ and PZ triplet excited state properties changed in the presence of HPC. The triplet lifetime increases with HPC concentration that is related to the amount of drug bound. In addition, the triplet intersystem crossing quantum yield was determined to be 0.45 and 0.17 for PZ and CPZ, respectively, when more than 95% of the drug molecules are bound to HPC. Altogether, these results suggest that the microenvironment plays a crucial role in the ³CPZ* and ³PZ* properties and thus it can modulate their photosensitizing effects.     

Ultrasound-assisted extraction of soy isoflavones

Efficiency in extracting four isoflavone derivatives (daidzin, glycitin, genistin and malonyl genistin) from freeze-dried ground soybeans was compared for mix-stirring extraction and ultrasound-assisted extraction, using different solvents and extraction temperatures with both. The efficiency of the extraction of soy isoflavones was improved by ultrasound but was dependent on the solvent employed. Optimization of the ratios of sample quantity to solvent volume and length of extraction time was also performed. Isoflavones can be quantitatively extracted from soybeans with 50% ethanol at 60 degrees C using ultrasound-assisted extraction in 20 min.