Pore size distribution analysis of selected hexagonal mesoporous silicas by grand canonical Monte Carlo simulations

We combine here a regularization procedure with individual adsorption isotherms obtained from grand canonical Monte Carlo simulations in order to obtain reliable pore size distributions. The methodology is applied to two hexagonal high-ordered silica materials: SBA-15 and PHTS, synthesized in our laboratory. Feasible pore size distributions are calculated through an adaptable procedure of deconvolution over the adsorption integral equation, with two necessary inputs: the experimental adsorption data and individual adsorption isotherms, assuming the validity of the independent pore model. The application of the deconvolution procedure implies an adequate grid size evaluation (i.e., numbers of pores and relative pressures to be considered for the inversion, or kernel size), the fulfillment of the discret Picard condition, and the appropriate choice of the regularization parameter (L-curve criteria). Assuming cylindrical geometry for both porous materials, the same set of individual adsorption isotherms generated from molecular simulations can be used to construct the kernel to obtain the PSD of SBA-15 and PHTS. The PSD robustness is measured imposing random errors over the experimental data. Excellent agreement is found between the calculated and the experimental global adsorption isotherms for both materials. Molecular simulations provide new insights into the studied systems, pointing out the need of high-resolution isotherms to describe the presence of complementary microporosity in these materials.     

Ultrasound-assisted extraction of soy isoflavones

Efficiency in extracting four isoflavone derivatives (daidzin, glycitin, genistin and malonyl genistin) from freeze-dried ground soybeans was compared for mix-stirring extraction and ultrasound-assisted extraction, using different solvents and extraction temperatures with both. The efficiency of the extraction of soy isoflavones was improved by ultrasound but was dependent on the solvent employed. Optimization of the ratios of sample quantity to solvent volume and length of extraction time was also performed. Isoflavones can be quantitatively extracted from soybeans with 50% ethanol at 60 degrees C using ultrasound-assisted extraction in 20 min.     

Rapid Determination of Simple Polyphenols in Grapes by LC Using a Monolithic Column

The development of a rapid, reliable and reproducible LC method for the determination and quantification of 13 polyphenols (gallic acid, protocatechuic aldehyde, gentisic acid, catechin, vanillinic acid, caffeic acid, vanillin, epicatechin, syringaldehyde, p-coumaric acid, ferulic acid, sinapic acid and resveratrol) in grapes and derived products is reported. The polyphenols were separated in less than 8 min. Employed was an RP-18e (100 mm × 4.6 mm) monolithic type column. A gradient method with the following solvents was utilised for the chromatographic separation: A: 90% water, 2% acetic acid in methanol, and B: 90% methanol, 2% acetic acid in water. Two detectors in series were employed: a UV–Vis detector and a fluorescence excitation/emission detector. Influence of temperature (15–40 °C) and solvent flow rate (2–5 mL min^?1) on the separation were studied, and 25 °C and 2.5 mL min^?1 were found to be the optimum conditions. The relative standard deviations of the resulting peak areas, for both intra- and inter- experiments, were less than 2.4 and 2.6%, respectively. Finally, the developed method has been utilised for the quantification of the polyphenols in real samples.     

Determination of trihalomethanes in soil matrices by simplified quick,easy, cheap,effective, rugged and safe extraction and fast gas chromatography with electron capture detection

A method based on QuEChERS extraction is proposed for the determination of trihalomethanes (chloroform, bromodichloromethane, dibromocloromethane and bromoform) in soil samples. The new version of QuEChERS adapted to soil samples consists of liquid extraction with ethyl acetate, the addition of water to moisten the samples, salting-out partitioning of the water with anhydrous MgSO₄, and direct injection of the organic extract, obtained after the centrifugation step, into the gas chromatograph. This simplified extraction procedure maintains the advantages of the original method and avoids some steps, making the final procedure simpler, faster, and cheaper, with the consequent reduction in errors associated with sample manipulation. The experimental conditions of the analytical method, based on fast gas chromatography (FGC) and micro-electron capture detection (μECD), were optimized. The column and oven program used allowed fast separation of the compounds in less than 4 min and the total analysis cycle time was as short as 10 min. The existence of a matrix effect was checked and the analytical conditions of the method were studied in a fortified garden soil sample. The highly sensitive and selective detector used afforded to detection limits in the order of ng/kg for the target compounds. To validate the proposed method two certified reference materials (CRMs) were analyzed.     

Inelastic neutron scattering study of water in hydrated LTA-type zeolites

The vibrational dynamics of water molecules encapsulated in synthetic Na-A and Mg-exchanged A zeolites were studied versus temperature by inelastic neutron scattering (INS) measurements (30-1200 cm(-1)) as a function of the induced ion-exchange percentage by using the indirect geometry tof spectrometer TOSCA at the ISIS pulse neutron facility (RAL, UK). The experimental INS spectra were compared with those of ice Ih to characterize the structural changes induced by confinement on the H2O hydrogen-bonded network. We observed, after increasing the Mg2+ content, a tendency of water molecules to restore the bulklike arrangements together with more hindered dynamics. These results are confirmed by the analysis of the evaluated one-phonon amplitude-weighted proton vibrational density of states aimed, in particular, to follow the evolution of the water molecules librational mode region.     

Validation of two analytical methods for the determination of ochratoxin A by reversed-phased high-performance liquid chromatography coupled to fluorescence detection in musts and sweet wines from Andalusia

Some Spanish sweet wines are made from raisins, grapes dried by direct exposure to the sun after picking. This drying process can encourage ochratoxin A (OTA) formation. OTA is a mycotoxin formed by several fungi. It has been linked to nephropathy in humans, and may have a long half-life in humans. The aim of this study is to develop and to apply two procedures for the analysis of OTA in grape musts (during the raisining process) and sweet wines, respectively. Reversed-phase high-performance liquid chromatography (RP-HPLC) coupled to fluorescence detection (FLD) was employed in both analytical methods. In grape must, the method involves the direct injection of the sample in a HPLC-FLD system without any kind of prior clean-up procedure. The complexity of the sweet wine samples requires a solid-phase extraction (SPE) clean-up on a C18 column which enables the OTA to be isolated from the matrix. The methods used were statistically validated. The validation also included the comparison of the slopes of the curve obtained with standards and the regression curves obtained by the addition of a standard. Two different studies of standard additions were conducted. One method was validated without sample preparation and it was applied to must samples. The other method was validated with SPE extraction and it was applied to sweet wine samples. Recovery was always better than 89.69%. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) were established at 0.22 and 0.77 μg l⁻¹, respectively. In general, the analytical data obtained provided good results at the sub-μg l⁻¹ concentration level.     

Development of a new stir bar sorptive extraction method for the determination of medium‐level volatile thiols in wine

A fast, simple, and reliable analytical method for the determination of medium‐level volatile thiols in wines is presented. Stir bar sorptive extraction using ethylene glycol‐silicone coated stir bars has been used in combination with thermal desorption gas chromatography with mass spectrometry for the analysis of 4‐mercapto‐4‐methylpentan‐2‐one, 2‐furanmethanethiol, 3‐mercaptohexyl acetate, and 3‐mercaptohexanol in wine. Optimization of the extraction technique was performed using a two‐level fractional factorial design. For the extraction step, the optimum conditions were: Ethylene glycol and silicone coated stir bars, pH at 3.5, sample volume of 25 mL, extraction time of 90 min, NaCl content 4.0 g, and stirring speed at 500 rpm. The optimized method achieved good linearity for all studied compounds (r² > 0.995) and it provided detection limits of 21.52, 0.36, 0.73, and 2.55 μg/L for 4‐mercapto‐4‐methylpentan‐2‐one, 2‐furanmethanethiol, 3‐mercaptohexyl acetate, and 3‐mercaptohexanol, respectively. It was repeatable, with precisions lower than 18% relative standard deviation for both intraday and interday repeatability. The developed procedure is suitable for the determination of these kinds of compounds when they are present at medium concentration levels. It was finally applied to real wine samples with negative aroma derived from the high concentration levels of these compounds.     

Determination of catechins by means of extraction with pressurized liquids

The technique of extraction with pressurized liquids is applied for extraction of catechin and epicatechin in tea leaves and in grape seeds. The extracts obtained are then analyzed by HPLC. A comparison has been made of the recoveries obtained employing extraction by magnetic stirring, ultrasound-assisted extraction, and extraction with pressurized liquids. In the three extraction systems, four different pure solvents were utilized, namely water, methanol, ethanol, and ethyl acetate. Methanol produced the best results. For this comparison, an initial step was to check the stability of catechins during the process of extraction using pressurized liquids at high temperature (100-200 degrees C). It has been confirmed that recoveries of these two compounds begin to fall, to below 95%, at 130 degrees C and above. Pressurized liquid extraction using methanol as solvent, produces results, in terms of recovery of catechin and of epicatechin, notably higher than any of the other conditions of extraction tested. The duration of the extraction cycle was also evaluated and re-extractions were performed to ensure the full recovery from the samples. It was found that, forcatechin, the R.S.D. of the method is 3.21%, and for epicatechin the R.S.D. was 2.96% (n = 5). The final optimized pressurized liquid extraction method allows for the determination of catechin and epicatechin in diverse types of samples with a rapid (10 min) and reproducible method.     

A single chiroptical spectroscopic method may not be able to establish the absolute configurations of diastereomers: dimethylesters of hibiscus and garcinia acids

Electronic circular dichroism (ECD), optical rotatory dispersion (ORD), and vibrational circular dichroism (VCD) spectra of hibiscus acid dimethyl ester have been measured and analyzed in combination with quantum chemical calculations of corresponding spectra. These results, along with those reported previously for garcinia acid dimethyl ester, reveal that none of these three (ECD, ORD, or VCD) spectroscopic methods, in isolation, can unequivocally establish the absolute configurations of diastereomers. This deficiency is eliminated when a combined spectral analysis of either ECD and VCD or ORD and VCD methods is used. It is also found that the ambiguities in the assignment of absolute configurations of diastereomers may also be overcome when unpolarized vibrational absorption is included in the spectral analysis.