Study on volatile components in salami by reverse carrier gas headspace gas chromatography-mass spectrometry

Salami are a typical seasoned sausage of Italy; a number of types are produced, according to local traditional recipes. As industrial production has taken place, a number of problems rise in obtaining products similar to the traditional ones. The use of selected microbial starters is permitted by Italian law for some years and at present, microbiological research is engaged in selecting starters similar to the ones isolated from traditional products, with the aim of obtaining organoleptic characteristics close to the ones of traditional recipes. A study was carried out concerning the characterisation of volatile components of salami by headspace capillary gas chromatography-mass spectrometry. As during the sampling step, analytes could reach the analytical column, the carrier gas rate was back flushed in the latter, while a pre column was used as cold trap. Then GC-MS analysis follows. By these techniques, we were able to highlight typical profiles of different salami, as well as monitoring the ripening of a traditional and a starter added salami. Main peaks are of fermentative origin, while also peaks from spices were detected. Ethyl propionate was used as internal standard to be able to normalise the peaks amounts.     

General Solution for Hamiltonians with Extended Cubic and Quartic Potentials

In terms of hyperelliptic functions, we integrate a two-particle Hamiltonian with quartic potential and additional linear and nonpolynomial terms in the Liouville integrable cases 1:6:1 and 1:6:8.     

Synthesis, Chemical Characterization, and Molecular Structure of Au8{Fe(CO)4}4(dppe)2 and Au6Cu2{Fe(CO)4}4(dppe)2

The new Au₈{Fe(CO)₄}₄(P^P)₂ and Au₆Cu₂{Fe(CO)₄}₄(P^P)₂ (P^P=dppm, dppe) neutral cluster compounds were isolated in good yields by condensation of the [Au₃{Fe(CO)₄}₂(P^P)]^- anions with Au(SEt₂)Cl and CuCl, respectively, and have been characterized by IR, NMR and microanalyses. The molecular structures of Au₈{Fe(CO)₄}₄(dppe)₂ and Au₆Cu₂{Fe(CO)₄}₄(dppe)₂ have been determined by X-ray diffraction studies. Both molecules adopt a stereogeometry of the heavy atoms consisting of a triangulated and corrugated ribbon twisted around the elongation direction. Contrary to the expectations the latter displays the two copper atoms in the sites of highest connectivity. This implies that site exchange between copper and gold occurs during the synthesis.     

Synthesis and Chemical and Electrochemical Characterization of Fe-S Carbonyl Clusters. X-ray Crystal Structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)

A reinvestigation of the redox behavior of the [Fe(3)(&mgr;(3)-S)(CO)(9)](2)(-) dianion led to the isolation and characterization of the new [Fe(5)S(2)(CO)(14)](2)(-), as well as the known [Fe(6)S(6)(CO)(12)](2)(-) dianion. As a corollary, new syntheses of the [Fe(3)S(CO)(9)](2)(-) dianion are also reported. The [Fe(5)S(2)(CO)(14)](2)(-) dianion has been obtained by oxidative condensation of [Fe(3)S(CO)(9)](2)(-) induced by tropylium and Ag(I) salts or SCl(2), or more straightforwardly through the reaction of [Fe(4)(CO)(13)](2)(-) with SCl(2). The [Fe(6)S(6)(CO)(12)](2)(-) dianion has been isolated as a byproduct of the synthesis of [Fe(3)S(CO)(9)](2)(-) and [Fe(5)S(2)(CO)(14)](2)(-) or by reaction of [Fe(4)(CO)(13)](2)(-) with elemental sulfur. The structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)] were determined by single-crystal X-ray diffraction analyses. Crystal data: for [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)], monoclinic, space group P2(1)/c (No. 14), a = 24.060(5), b = 14.355(6), c = 23.898(13) ?, beta = 90.42(3) degrees, Z = 4; for [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)], monoclinic, space group C2/c (No. 15), a = 34.424(4), b = 14.081(2), c = 19.674(2) ?, beta = 115.72(1) degrees, Z = 4. The new [Fe(5)S(2)(CO)(14)](2)(-) dianion shows a "bow tie" arrangement of the five metal atoms. The two Fe(3) triangles sharing the central Fe atom are not coplanar and show a dihedral angle of 55.08(3) degrees. Each Fe(3) moiety is capped by a triply bridging sulfide ligand. The 14 carbonyl groups are all terminal; two are bonded to the unique central atom and three to each peripheral iron atom. Protonation of the [Fe(5)S(2)(CO)(14)](2)(-) dianion gives reversibly rise to the corresponding [HFe(5)S(2)(CO)(14)](-) monohydride derivative, which shows an (1)H-NMR signal at delta -21.7 ppm. Its further protonation results in decomposition to mixtures of Fe(2)S(2)(CO)(6) and Fe(3)S(2)(CO)(9), rather than formation of the expected H(2)Fe(5)S(2)(CO)(14) dihydride. Exhaustive reduction of [Fe(5)S(2)(CO)(14)](2)(-) with sodium diphenyl ketyl progressively leads to fragmentation into [Fe(3)S(CO)(9)](2)(-) and [Fe(CO)(4)](2)(-), whereas electrochemical, as well as chemical oxidation with silver or tropylium tetrafluoroborate, in dichloromethane, generates the corresponding [Fe(5)S(2)(CO)(14)](-) radical anion which exhibits an ESR signal at g = 2.067 at 200 K. The electrochemical studies also indicated the existence of a subsequent one-electron anodic oxidation which possesses features of chemical reversibility in dichloromethane but not in acetonitrile solution. A reexamination of the electrochemical behavior of the [Fe(3)S(CO)(9)](2)(-) dianion coupled with ESR monitoring enabled the spectroscopic characterization of the [Fe(3)S(CO)(9)](-) radical monoanion and demonstrated its direct involvement in the generation of the [Fe(5)S(2)(CO)(14)](n)()(-) (n = 0, 1, 2) system.     

Determination of cobalt in sewage sludge using ultrasonic slurry sampling graphite furnace atomic absorption spectrometry

Cobalt in sludge of domestic and industrial origin, with high iron contents (> 17 g/kg), was determined by slurry sampling graphite furnace atomic absorption spectrometry (GF-AAS). Slurries prepared by ultrasonic stirring were adequately diluted to cover the variation in cobalt content in the sludge samples. The diluent was 5% HNO3. Standard atomisation conditions for cobalt determination were used and no matrix modifier was applied. Slurry sampling GF-AAS results in the sludge were verified by analysing totally digested samples by inductively coupled plasma atomic emission spectrometry (ICP-AES) and by GF-AAS. The procedure was validated by analysing the certified reference material BCR 146 R, a sewage sludge of industrial origin. Recoveries for cobalt in the spiked slurried sludge samples ranged from 92 to 96%, with a relative standard deviation of 10%. Recoveries in the certified sludge using slurry sampling GF-AAS technique were about 103% for a cobalt content of 7.39 mg/kg.     

New Ni–Pt Carbonyl Clusters with a Tetrahedron of Platinum Atoms Encapsulated in an Incomplete Tetrahedron of Nickel Atoms: [Ni36Pt4(CO)45]6− and [Ni37Pt4(CO)46]6−

A fully encapsulated Pt ₄ tetrahedron in an incomplete tetrahedron of 36 nickel atoms is present in [Ni₃₆Pt₄(CO)₄₅]⁶⁻ ( 1 ; see picture for the metal framework), which is obtained as an inseparable mixture with [Ni₃₇Pt₄(CO)₄₆]⁶⁻ ( 2 ) by reaction of [Ni₆(CO)₁₂]²⁻ with K₂[PtCl₄]. The trimethylbenzylammonium salts of 1 and 2 cocrystallize in a 1:1 ratio. The additional Ni atom of 2 caps the truncated vertex of 1 .     

Structure and stereochemistry of a new cytotoxic polychlorinated sulfolipid from Adriatic shellfish

A detailed analysis of the causative toxins contained in the hepatopancreas of toxic mussels from the northern Adriatic sea has been carried out. Along with some DSP (diarrhetic shellfish poisoning) type toxins, such as okadaic acid, yessotoxin, and their derivatives, which are involved in a number of human intoxications throughout the world, we have now isolated a new cytotoxin, a polychlorinated sulfolipid 1, whose gross structure has been elucidated by spectral analysis, including various 2D NMR techniques. The relative stereochemistry of 1 was elucidated by successful application of the J-based configuration analysis developed for acyclic compounds using carbon-proton spin-coupling constants ((2,3)J(C,H)) and proton-proton spin-coupling constants ((3)J(H,H)); its absolute stereochemistry was established by the Mosher method. Compound 1 possesses in vitro cytotoxicity against WEHI 164 and RAW 264.7 cells.