Synthesis of Resorcinols via a Michael Addition-Dieckman Cyclization Sequence of Dimethyl 1,3-Acetonedicarboxylate Anion with Alkyl Alkynoates

The reaction of dimethyl 1,3-acetonedicarboxylate anion 1 with a number of alkyl alkynoates gives unsymmetrical (from alkynoates 2a-g) or symmetrical (from alkynoates 2h-i) resorcinols, in a one pot synthesis.     

The Effect of Sample Age and Neutron Radiation to Dynamic Nuclear Polarization Parameters in Some Asphaltene Suspensions

Nuclear magnetic resonance and the Overhauser effect type dynamic nuclear polarization experiments were performed to study suspensions of asphaltene in the xylene isomers at a low magnetic field of 1.44 mT at room temperature. Intermolecular spin-spin interactions occur between nuclear spins of hydrogen in the solvent medium and the free electron spins in the asphaltene micelles. The samples were prepared in three different asphaltene concentrations at vacuum. The samples were waited for four years and dynamic nuclear polarization parameters were found via dynamic nuclear polarization experiments performed again. Thus, it was investigated the effect of sample age to dynamic nuclear polarization parameters. In addition, the medium concentrations of each sample were exposed to radiation for 48 hours and neutron radiation effects to the dynamic nuclear polarization parameters were investigated. The results are discussed.     

Evolution and solar modulation of 7Be during the solar cycle 23

The modulation of ⁷Be-aerosols concentration due to solar activity during the cycle 23 is studied in the present research. For that purpose, was analyzed the differences in the long-term variation of geomagnetic and solar activity to assess the physical effects over the evolution of ⁷Be during the period 1996–2010. Furthermore, exploratory data analysis was applied to understand better the behavior of ⁷Be-aerosols in the surface atmosphere. This study shows that there is an inverse relationship among ⁷Be measured in the near ground air and solar activity. The modulation of ⁷Be-aerosols during the cycle 23 was divided in two steps. In the first stage, ascending phase, 1996–2002, the solar activity played an important role in the production rate of ⁷Be, r = ?0.75. However, during the descending phase, 2002–2009, the role of the solar activity was secondary, r = ?0.30, allowing that ⁷Be-aerosols reached the maximum concentration, 9.33 mBq m^?3 in August-09 when the solar activity was zero. Moreover, the remaining solar activity after the end of the ascending phase and the last important solar storm (December-06) caused the slowdown of ⁷Be production rate from 2001 to 2004 and the rupture of the seasonal behavior of ⁷Be in 2007, respectively. Finally, this research highlight the necessity to take into account the solar cycle phase, ascending or descending, to model studies of atmospheric process with ⁷Be as tracer since the contribution of the variables studied are so different in these stages.     

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.     

Radioanalytical assessment of environmental contamination around non-remediated uranium mining legacy site and radium mobility

During the past century extensive uranium mining took place in Portugal for radium and uranium production. One such uranium mine was the Boco Mine, in operation during the 1960s and 70s. Mining waste and open pits were left uncovered since mine closure. During the nineties a quarry for sand extraction was operated in the same site and water from a local stream was extensively used in sand sieving. Downstream the mine area, agriculture soil is used for cattle grazing. Water from the stream, water wells, soil, pasture and sheep meat were now analyzed for radionuclides of uranium natural series. The U-series radionuclide ²²⁶Ra was generally the highest in concentrations especially in soil, pasture, and in internal organs of sheep. ²²⁶Ra concentrations were 1,093 ± 96 Bq/kg (dry weight, dw) in soil, 43 ± 3 Bq/kg (dw) in pasture, and 193 ± 84 mBq/kg (wet weight, ww) in muscle tissue of sheep. Other sheep internal organs displayed much higher ²²⁶Ra concentrations, such as the brain and kidneys with 1,850 ± 613 mBq/kg (ww) and 6,043 ± 6,023 mBq/kg (ww), respectively. Results of analyses of tissue samples from sheep grown in a comparison area were 2 to 16 times lower, depending on the organ. Absorbed radiation doses for internal organs were computed and may exceed 5.2 mGy/y in the case of kidneys, near three times higher than in animals from the reference area, but below the threshold for biological effects. Radionuclide transfer in the terrestrial food chain and radiation exposure of the human population is discussed.     

A new rotating-disk sorptive extraction mode,with a copolymer of divinylbenzene and N-vinylpyrrolidone trapped in the cavity of the disk,used for determination of florfenicol residues in porcine plasma

A novel extraction approach was developed based on rotating-disk sorptive extraction (RDSE). In this approach the rotating-disk extraction device consists of a Teflon disk, with a cavity that is loaded with a commercial sorbent phase selected according to the polarity of the analyte. To avoid leakage of the sorbent, the cavity is covered with a fiberglass filter and sealed with a Teflon ring. The proposed novel analytical RDSE technique was used in this study to determine florfenicol levels in plasma as a model analyte, or sample system, to describe the pharmacokinetics of a veterinary formulation. The sorbent used for this application was the copolymer of divinylbenzene and N-vinylpyrrolidone (Oasis HLB), which was selected because the florfenicol molecule contains both hydrophilic and lipophilic moieties. After the extraction, final determination of the analyte was performed by HPLC–DAD. Calibration plots and other analytical features were obtained after 90 min of extraction. The calibration plot was linear over the interval 0.4–16 μg mL^?1 (n?=?6), with R ²?=?0.9999. Recovery and repeatability were determined using a blank plasma sample spiked with 4.8 μg mL^?1 florfenicol. A recovery of 91.5 %, with a relative standard deviation (RSD) of 8.8 %, was obtained when the extraction was evaluated using six different rotating-disk devices. Precision was also assessed, using the same disk (containing the same sorbent phase) for eight aliquots of the same sample. The RSD under these conditions was 10.2 %, clearly indicating that the sorptive phase could possibly be re-used. Accordingly, RDSE is a suitable sample preparation alternative to liquid–liquid extraction (LLE), solid-phase extraction (SPE), and stir-bar sorptive extraction (SBSE).     

A validated stability-indicating LC method for simultaneous determination of quinapril and hydrochlorothiazide in pharmaceutical samples

A stability-indicating liquid chromatographic method was developed and validated for simultaneous determination of quinapril and hydrochlorothiazide in drug substances and dosage forms. Chromatographic separation of quinapril, hydrochlorothiazide and its degradation products was achieved on a RP-18 column, using acetonitrile and phosphate buffer (pH 4.6) as mobile phase in a gradient mode and detection at 216 nm. Stress testing was performed under hydrolytic, oxidative, thermal and photolytic conditions. The degradation products were well resolved from main peaks, proving the stability-indicating power of the method. The assay was linear for quinapril and hydrochlorothiazide concentrations of 40–200 µg mL^?1 and 25–125 µg mL^?1, respectively. The developed method was selective, accurate and precise for quinapril and hydrochlorothiazide determination. This method was used to quantify both drugs in combined commercial tablets. The results showed that the proposed method was found to be suitable for quantitative determination and the stability study of quinapril and hydrochlorothiazide in pharmaceutical samples.      

Evaluation of the effect of silicon on the carbonization process of Colombian semi-anthracites

The environmental impacts associated with the exploitation and transformation of fossil resources aggravate the planet's situation in terms of climate change. Due to this, this paper studies an alternative use of mineral coal as a precursor to obtaining new materials with different properties to the starting coals. The thermal degradation of two Colombian semi-anthracites is analyzed through the thermogravimetry (TG) technique coupled to a Fourier transform infrared spectroscopy (FTIR) equipment from room temperature (25 °C) to 900 °C, at a heating rate of 10 K min^?1 in an inert atmosphere. The catalytic effect of the addition of silicon to these samples before being subjected to a carbonization process is evaluated during this process. The results indicated that the primary reaction occurs in the temperature range between 400 and 680 °C, where the highest mass loss rate was observed. At the end of the heating process, the TG profile of the samples with silicon addition showed losses between 14.33 and 18.82% in mass, these values being slightly higher compared to the starting and demineralized samples. The release of water, light gases such as CO₂, CH₄, and species such as toluene, phenol and formic acid was identified in most of the samples. The presence of silica seems to favor the release of all these species, being more evident in one of the semi-anthracites studied. According to the results obtained, it is proved that the presence of silicon in samples subjected to carbonization processes has a catalytic effect that improves some characteristics of the new materials obtained, thus contributing to the use of carbon to get new materials.

     

Preparation and characterization of microcapsules loaded with polyphenols-enriched Uncaria tomentosa extract using spray-dryer technique

Journal of Thermal Analysis and Calorimetry - This work prepared and characterized microcapsule of Uncaria tomentosa (UT) in order to standardize a spray-dryer Uncaria tomentosa extract. The UT...