In the present study, a model is presented to optimize the fabrication parameters of natural fiber reinforced polyester matrix composites with dual fillers. In particular, jute fiber mat was chosen as reinforcement and eggshell powder (ESP) and montmorillonite nanoclay (NC) were selected as fillers. The weight per square meter (GSM) of the fiber, the weight percentage of ESP and NC have been chosen as independent variables and the influence of these variables on tensile, flexural and impact strength of the composite has been inspected. The permutations of the different combinations of factors are intended to accomplish higher interfacial strength with the lowest possible number of tested specimens. The experiments were designed by the Taguchi strategy and a novel multi-objective optimization technique named COPRAS (COmplex PRoportional ASsessment of alternatives) was used to determine the optimal parameter combinations. Affirmation tests were performed with the optimal parameter settings and the mechanical properties were evaluated and compared. Experimental results show that fiber GSM and eggshell powder content are significant variables that improve mechanical strength, while the nanoclay appears less important. 相似文献
On‐surface synthesis offers a versatile approach to prepare novel carbon‐based nanostructures that cannot be obtained by conventional solution chemistry. Graphene nanoribbons (GNRs) have potential for a variety of applications. A key issue for their application in molecular electronics is in the fine‐tuning of their electronic properties through structural modifications, such as heteroatom doping or the incorporation of non‐benzenoid rings. In this context, the covalent fusion of GNRs and porphyrins (Pors) is a highly appealing strategy. Herein we present the selective on‐surface synthesis of a Por–GNR hybrid, which consists of two Pors connected by a short GNR segment. The atomically precise structure of the Por–GNR hybrid has been characterized by bond‐resolved scanning tunneling microscopy (STM) and noncontact atomic force microscopy (nc‐AFM). The electronic properties have been investigated by scanning tunneling spectroscopy (STS), in combination with DFT calculations, which reveals a low electronic gap of 0.4 eV. 相似文献
Bioactive metabolites isolated from medicinal mushrooms (MM) used as supportive treatment in conventional oncology have recently gained interest. Acting as anticancer agents, they interfere with tumor cells and microenvironment (TME), disturbing cancer development/progression. Nonetheless, their action mechanisms still need to be elucidated. Recently, using a 4T1 triple-negative mouse BC model, we demonstrated that supplementation with Micotherapy U-Care, a MM blend, produced a striking reduction of lung metastases density/number, paralleled by decreased inflammation and oxidative stress both in TME and metastases, together with QoL amelioration. We hypothesized that these effects could be due to either a direct anticancer effect and/or to a secondary/indirect impact of Micotherapy U-Care on systemic inflammation/immunomodulation. To address this question, we presently focused on apoptosis/proliferation, investigating specific molecules, i.e., PARP1, p53, BAX, Bcl2, and PCNA, whose critical role in BC is well recognized. We revealed that Micotherapy U-Care is effective to influence balance between cell death and proliferation, which appeared strictly interconnected and inversely related (p53/Bax vs. Bcl2/PARP1/PCNA expression trends). MM blend displayed a direct effect, with different efficacy extent on cancer cells and TME, forcing tumor cells to apoptosis. Yet again, this study supports the potential of MM extracts, as adjuvant supplement in the TNBC management. 相似文献
Triangular zigzag nanographenes, such as triangulene and its π‐extended homologues, have received widespread attention as organic nanomagnets for molecular spintronics, and may serve as building blocks for high‐spin networks with long‐range magnetic order, which are of immense fundamental and technological relevance. As a first step towards these lines, we present the on‐surface synthesis and a proof‐of‐principle experimental study of magnetism in covalently bonded triangulene dimers. On‐surface reactions of rationally designed precursor molecules on Au(111) lead to the selective formation of triangulene dimers in which the triangulene units are either directly connected through their minority sublattice atoms, or are separated via a 1,4‐phenylene spacer. The chemical structures of the dimers have been characterized by bond‐resolved scanning tunneling microscopy. Scanning tunneling spectroscopy and inelastic electron tunneling spectroscopy measurements reveal collective singlet–triplet spin excitations in the dimers, demonstrating efficient intertriangulene magnetic coupling. 相似文献
Cumulene compounds are notoriously difficult to prepare and study because their reactivity increases dramatically with the increasing number of consecutive double bonds. In this respect, the emerging field of on‐surface synthesis provides exceptional opportunities because it relies on reactions on clean metal substrates under well‐controlled ultrahigh‐vacuum conditions. Here we report the on‐surface synthesis of a polymer linked by cumulene‐like bonds on a Au(111) surface via sequential thermally activated dehalogenative C?C coupling of a tribenzoazulene precursor equipped with two dibromomethylene groups. The structure and electronic properties of the resulting polymer with cumulene‐like pentagon–pentagon and heptagon–heptagon connections have been investigated by means of scanning probe microscopy and spectroscopy methods and X‐ray photoelectron spectroscopy, complemented by density functional theory calculations. Our results provide perspectives for the on‐surface synthesis of cumulene‐containing compounds, as well as protocols relevant to the stepwise fabrication of carbon–carbon bonds on surfaces. 相似文献
The differential diagnosis of epileptic seizures (ES) and psychogenic non-epileptic seizures (PNES) may be difficult, due to the lack of distinctive clinical features. The interictal electroencephalographic (EEG) signal may also be normal in patients with ES. Innovative diagnostic tools that exploit non-linear EEG analysis and deep learning (DL) could provide important support to physicians for clinical diagnosis. In this work, 18 patients with new-onset ES (12 males, 6 females) and 18 patients with video-recorded PNES (2 males, 16 females) with normal interictal EEG at visual inspection were enrolled. None of them was taking psychotropic drugs. A convolutional neural network (CNN) scheme using DL classification was designed to classify the two categories of subjects (ES vs. PNES). The proposed architecture performs an EEG time-frequency transformation and a classification step with a CNN. The CNN was able to classify the EEG recordings of subjects with ES vs. subjects with PNES with 94.4% accuracy. CNN provided high performance in the assigned binary classification when compared to standard learning algorithms (multi-layer perceptron, support vector machine, linear discriminant analysis and quadratic discriminant analysis). In order to interpret how the CNN achieved this performance, information theoretical analysis was carried out. Specifically, the permutation entropy (PE) of the feature maps was evaluated and compared in the two classes. The achieved results, although preliminary, encourage the use of these innovative techniques to support neurologists in early diagnoses. 相似文献
The behaviour of masonry constructions results to be very far from the one characterizing ductile structures. In masonry constructions, the seismic action activates a rocking motion rather than a dissipating mechanism. A strength resource of masonry structures, properly reinforced in order to avoid early local failures, consists in exhibiting rocking behaviour, until a failure condition is attained. Aim of the paper is to investigate the dynamic behaviour of masonry single storey walls, according to Housner’s studies and innovatively introducing the effect of diagonal cracks developing from the toes of the piers and shown by typical post-earthquake cracking patterns. The proposed procedure can be easily applied to the case of multi-storey regular masonry walls with openings representing the main resistant structural components of a masonry building. Starting from the evaluation of the incipient rocking acceleration of the system, the free and forced motions of the wall are examined. In the paper, according to the classical Housner’s approach, the energy dissipation occurring during the impact is modelled. Finally, a numerical application, considering a simple constant horizontal acceleration impulse of given duration has been carried out.
Porous crystals are strategic materials with industrial applications within petrochemistry, catalysis, gas storage, and selective separation. Their unique properties are based on the molecular-scale porous character. However, a principal limitation of zeolites and similar oxide-based materials is the relatively small size of the pores, typically in the range of medium-sized molecules, limiting their use in pharmaceutical and fine chemical applications. Metal organic frameworks (MOFs) provided a breakthrough in this respect. New MOFs appear at a high and an increasing pace, but the appearances of new, stable inorganic building bricks are rare. Here we present a new zirconium-based inorganic building brick that allows the synthesis of very high surface area MOFs with unprecedented stability. The high stability is based on the combination of strong Zr-O bonds and the ability of the inner Zr6-cluster to rearrange reversibly upon removal or addition of mu3-OH groups, without any changes in the connecting carboxylates. The weak thermal, chemical, and mechanical stability of most MOFs is probably the most important property that limits their use in large scale industrial applications. The Zr-MOFs presented in this work have the toughness needed for industrial applications; decomposition temperature above 500 degrees C and resistance to most chemicals, and they remain crystalline even after exposure to 10 tons/cm2 of external pressure. 相似文献
Pyrolysis of hardware components wastes consisting mainly in computers and television components was performed under nitrogen. The degradation products were separated in three fractions, solid, liquid and gaseous. Analyses of the three phases were carried out using gas chromatography (GC), mass spectrometry (MS), thermal analysis and infrared spectroscopy. The energetic content of the gas phase and the economic value of the liquid phase were also determined. The gas fraction produced was rich in light hydrocarbons and hydrogen. Consequently, its calorific value was high and widely sufficient to make the pyrolysis process self-sustained. The main products of the liquid phase were phenol and isopropylphenol (ca. 50–80 wt.%). The presence of Br-based compounds, deriving from the flame retardant employed in hardware components, were also detected. A controlled combustion of the solid phase permitted to obtain the glass fibres unaltered, which can be recycled. 相似文献
Iron-Phthalocyanine molecules deposited on the Cu(119) vicinal surface form molecular chains along the vicinal surface steps,
as deduced by the low-energy electron diffraction (LEED) reconstruction pattern. The work-function lowers at the FePc single-layer
completion, due to the formation of an interface dipole. Further FePc deposition induces a different growth morphology, as
suggested by the slope discontinuity in the work function variation. Upon depositing potassium onto the FePc thin-film prepared
on Cu(119), the K-injected electrons fill up the Fe-d-associated and ligand-π-related orbitals, as observed by means of high-resolution
ultraviolet photoelectron spectroscopy. 相似文献