Two inequalities involving Hadamard products of positive semi-definite Hermitian matrices

We extend two inequalities involving Hadamard products of positive definite Hermitian matrices to positive semi-definite Hermitian matrices. Simultaneously, we also show the sufficient conditions for equalities to hold. Moreover, some other matrix inequalities are also obtained. Our results and methods are different from those which are obtained by S. Liu in [J. Math. Anal. Appl. 243:458–463(2000)] and B.-Y. Wang et al. in [Lin. Alg. Appl. 302–303: 163–172(1999)].     

4一致反超图的最小边数问题

混合超图是在超图的基础上添加一个反超边得到的图．超边和反超边的区别主要体现在着色要求上．在着色中,要求每一超边至少要有两个点着不同的颜色,而每一反超边至少有两个点着相同的颜色．最大最小颜色数分别称为混合超图的上色数和下色数。本文主要研究反超图,即只含反超边的超图。讨论了上色数为3的4一致超图的最小边数问题．给出了上色数为3的4一致反超图的最小边数的一个上界和一个下界．     

Pyroelectricity and Spontaneous Polarization in [111] Oriented 0.955 Pb（Zn1/3Nb2/3）O3-0.045PbTiO3 Single Crystals

We report that the measurements of the pyroelectric current of the pre-poled [111]-oriented 0.955 Pb（Zn1/3Nb2/3） O3-0.045 PbTiO3 （PZN-4.5%PT） single crystals can shed some light on the phase transition and spontaneous polarization characters of this material in a similar way to measures of remanent polarization and dielectric properties. The pyroelectric current is measured and the corresponding spontaneous polarization is calculated as a function of temperature with various poling fields added during cooling the sample from 200℃ to room temperature. Critical electric field of 0.061 k V/cm is found to be essential to induce the intermediate ferroelectric orthorhombic phase between the ferroelectric rhombohedral and tetragonal phases. Below the critical field, the polarization increases almost linearly with the increase of poling field. At the critical field, the polarization at 30OC increases abruptly from 14μC/cm^2 for a poling field of O.06kV/cm to 29.5μC/cm^2 for a poling field of 0.061 kV/cm, and afterwards, increases slowly and saturates to 31 μC/cm^2 for poling fields beyond 0.55 kV/cm.     

Pressure and temperature dependence of the gas‐transport properties of dense poly[2,6‐toluene‐2,2‐bis(3,4‐dicarboxylphenyl)hexafluoropropane diimide] membranes

The gas‐transport properties of poly[2,6‐toluene‐2,2‐bis(3,4‐dicarboxylphenyl)hexafluoropropane diimide] (6FDA‐2,6‐DAT) have been investigated. The sorption behavior of dense 6FDA‐2,6‐DAT membranes is well described by the dual‐mode sorption model and has certain relationships with the critical temperatures of the penetrants. The solubility coefficient decreases with an increase in either the pressure or temperature. The temperature dependence of the diffusivity coefficient increases with an increase in the penetrant size, as the order of the activation energy for the diffusion jump is CH₄ > N₂ > O₂ > CO₂. Also, the average diffusion coefficient increases with increasing pressure for all the gases tested. As a combined contribution from sorption and diffusion, permeability decreases with increases in the pressure and the kinetic diameter of the penetrant molecules. Even up to 32.7 atm, no plasticization phenomenon can be observed on flat dense 6FDA‐2,6‐DAT membranes from their permeability–pressure curves. However, just as for other gases, the absolute value of the heat of sorption of CO₂ decreases with increasing pressure at a low‐pressure range, but the trend changes when the feed pressure is greater than 10 atm. This implies that CO₂‐induced plasticization may occur and reduce the positive enthalpy required to create a site into which a penetrant can be sorbed. Therefore, a better diagnosis of the inherent threshold pressure for the plasticization of a glassy polymer membrane may involve examining the absolute value of the heat of sorption as a function of pressure and identifying the turning point at which the gradient of the absolute value of the heat of sorption against pressure turns from a negative value to a positive one. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 354–364, 2004     

The perturbation bounds for the solution of weighted kronecker product linear systems using thew-weighted drazin inverse

The classical perturbation theory is extended to the weighted Kronecker product linear systems W(A? B)Wx =h. Upper bounds are derived for the normwise condition number.     

Spin-transfer switching in MgO magnetic tunnel junction nanostructures

Spin-transfer driven switching was observed in MgO based magnetic tunnelling junctions (MTJ) with tunnelling magnetoresistance ratio of up to 160% and the average intrinsic switching current density (J_c0) down to 2 MA/cm², which are the best known results reported in spin-transfer switched MTJ nanostructures. Based on a comparison of results both from MgO and AlO_x MTJs, further switching current decrease via MgO dual structures with two pinned layers is discussed.     

Periodic solutions for a Lotka–Volterra mutualism system with several delays

In the present paper, a Lotka–Volterra type mutualism system with several delays is studied. Some new and interesting sufficient conditions are obtained for the global existence of positive periodic solutions of the mutualism system. Our method is based on Mawhin’s coincidence degree and novel estimation techniques for the a priori bounds of unknown solutions. Our results are different from the existing ones such as those in of Yang et al. [F. Yang, D. Jiang, A. Ying, Existence of positive solution of multidelays facultative mutualism system, J. Eng. Math. 3 (2002) 64–68] and Chen et al. [F. Chen, J. Shi, X. Chen, Periodicity in a Lotka–Volterra facultative mutualism system with several delays, J. Eng. Math. 21 (3) (2004) 403–409].     

Geometrical study of paraxial light beam transmission in free space

By introducing an imaginary space transform curvature ρ_s, a complex space called Riemannian space is constructed, in which the light propagating in free space has the trajectory of straight line while propagating. Moreover, this curvature couples with that of the wave front of the paraxial beam ρ_w, and therefore a complex curvature ρ_c is constructed, which can be employed to investigate the behavior of the light transmission and to generalize the ABCD law. Project supported by the National Hi-Tech Inertial Confinement Fusion Committee, the Guangdong Natural Science Foundation the Postdoctoral Foundation of Guangdong and National Postdoctoral Foundation of China.     

Synthesis and mesomorphic behaviour of comb-like polymers based on lipopeptides with two hydrophobic chains

Polymerizable lipopeptides with two hydrophobic chains were synthesized and transformed into comb-like polymers by radical polymerization. The structure of dry polymerizable lipopeptides and comb-like polymers and of their aqueous solutions was determined by X-ray diffraction. Comb-like polymers exhibit both thermotropic and lyotropic properties. Three types of mesomorphic structure were resolved: smectic B, smectic A and cylindrical hexagonal. The domains of stability of the mesophases and the values of their structural parameters were established.     

Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007