Resonant non-linear waves—III. Elastic continuum with quadratic non-linearity

The paper derives the relevant non-linear integro-differential evolution equation by the method due to Collins expanding on a procedure by Keller. The quadratically non-linear case is not a trivial variation over the cubically non-linear case that was presented in preceding papers. As expected a different scaling and ordering of terms is needed and the first order perturbation solution provides no information on resonance. Nevertheless, although obtained by much longer calculations, the final equation for the present case is of identical form, with differences only in numerical coefficients, with the cubic case that was presented and solved earlier.     

Influence of the atomic structure on the Raman spectra of graphite edges

A study of step edges in graphite with different atomic structures combining Raman spectroscopy and scanning probe microscopy is presented. The orientation of the carbon hexagons with respect to the edge axis, in the so-called armchair or zigzag arrangements, is distinguished spectroscopically by the intensity of a disorder-induced Raman peak. This effect is explained by applying the double resonance theory to a semi-infinite graphite crystal and by considering the one-dimensional character of the defect.     

对叔丁基杯[8]芳烃酯类衍生物的合成方法改进及其对酯型儿茶素的萃取性能

以酰氯为酰基化试剂,用三乙胺作缚酸剂和催化剂,制备了一系列对叔丁基杯[8]芳烃酯类衍生物(2a～2e),其结构经1H NMR, IR和元素分析表征.以2为萃取剂,考察了酯型儿茶素单体在二氯甲烷-水两相体系中的萃取分配行为.结果表明:2e的萃取效果最佳.     

The key factors in fabrication of high-quality ordered macroporous copper film

The template-directed fabrication of highly-ordered porous film is of significant importance in implementation of the photonic band gap structure. The paper reports a simple and effective method to improve the electrodeposition of metal porous film by utilizing highly-ordered polystyrene spheres (PSs) template. By surface-modification method, the hydrophobic property of the PSs template surfaces was changed into hydrophilic one. It was demonstrated that the surface modification process enhanced the permeability of the electrolyte solution in the nanometer-sized voids of the colloidal template. The homogeneously deposited copper film with the highly-ordered voids in size of less than 500 nm was successfully obtained. In addition, it was found that large defects, such as microcracks in the template, strongly influenced the macroporous films quality. An obvious preferential growth in the cracked area was observed.     

Isomer-specific influences on ignition and intermediates of two C5 ketones in an RCM

Ketones have been considered as potential biofuels and main components of blend stock for internal engines. To better understand the chemical kinetics of ketones, ignition delay times of 2-pentanone (propyl methyl ketone, PMK) and 3-pentanone (diethyl ketone, DEK) were measured at temperatures of 895–1128 K under 10 and 20 bar, at equivalence ratios (?) of 0.5 and 1.0 in a rapid compression machine (RCM). To explore the impact of carbonyl functionality and resonance stabilized structures of fuel radicals on their combustion kinetics, high-temperature pyrolysis at 1130 K and relatively low-temperature oxidation at 950 K studies were performed in an RCM, and the time-resolved species concentration profiles under these two conditions were quantified using a fast sampling system and gas chromatography (GC). A new kinetic model containing low-temperature reactions was built aiming at predicting the pyrolysis and oxidation behaviors of both ketones. The consumption pathways of the resonance stabilization fuel radicals through oxygen addition and following reactions are promoted since the decomposition rates of these radicals are about 4 orders magnitudes lower than regular fuel radicals. The occurrences of the so-called “addition-dissociation reactions”, i.e., ketones reacting with a hydrogen yielding aldehyde or reacting with a methyl radical yielding shorter-chain-length ketones, are verified in pyrolysis experiments. Based on experiments and model analysis, the carbonyl functionality in both ketones is preserved during the process of β-scissions of fuel radicals and α-scissions of fuel-related acyl radicals, resulting in the direct formation of CO and ketene. However, the position of carbonyl functionality has a significant impact on the species pools.     

New acetylated flavone C-glycosides from Iris lactea

Chemical investigation of the aerial parts of Iris lactea afforded three new flavone C-glycosides including 4?-O-acetyl-embinin (1), 2?,4?-O-diacetyl-embinin (2) and 6″,4?-O-diacetyl-embinin (3) along with the known analogue embinin (4). Their structures were elucidated by 1D and 2D NMR spectroscopic analysis as well as by HRESIMS data. The sugars were characterized following acid hydrolysis of the respective glycosides and TLC analysis compared to known standards. Duplicated signals can be observed in the NMR spectra, indicating the presence of rotamers caused by rotational hindrance around the glycosyl-flavone CC linkage. All isolated compounds were tested for their antimicrobial and cytotoxic activities but found to be inactive.     

Research on the Solid State Fermentation of Jerusalem Artichoke Pomace for Producing <Emphasis Type="Italic">R</Emphasis>,<Emphasis Type="Italic">R</Emphasis>-2,3-Butanediol by <Emphasis Type="Italic">Paenibacillus polymyxa</Emphasis> ZJ-9

R,R-2,3-butanediol (R,R-2,3-BD) was produced by Paenibacillus polymyxa ZJ-9, which was capable of utilizing inulin without previous hydrolysis. The Jerusalem artichoke pomace (JAP) derived from the conversion of Jerusalem artichoke powder into inulin extract, which was usually used for biorefinery by submerged fermentation (SMF), was utilized in solid state fermentation (SSF) to produce R,R-2,3-BD. In this study, the fermentation parameters of SSF were optimized and determined in flasks. A novel bioreactor was designed and assembled for the laboratory scale-up of SSF, with a maximum yield of R,R-2,3-BD (67.90 g/kg (JAP)). This result is a 36.3% improvement compared with the flasks. Based on the same bath of Jerusalem artichoke powder, the total output of R,R-2,3-BD increased by 38.8% for the SSF of JAP combined with the SMF of inulin extraction. Overall, the utilization of JAP for R,R-2,3-BD production was beneficial to the comprehensive utilization of Jerusalem artichoke tuber.     

A Reusable DNA Single‐Walled Carbon‐Nanotube‐Based Fluorescent Sensor for Highly Sensitive and Selective Detection of Ag+ and Cysteine in Aqueous Solutions

Here we report a reusable DNA single‐walled carbon nanotube (SWNT)‐based fluorescent sensor for highly sensitive and selective detection of Ag⁺ and cysteine (Cys) in aqueous solution. SWNTs can effectively quench the fluorescence of dye‐labeled single‐stranded DNA due to their strong π–π stacking interactions. However, upon incubation with Ag⁺, Ag⁺ can induce stable duplex formation mediated by C–Ag⁺–C (C=cytosine) coordination chemistry, which has been further confirmed by DNA melting studies. This weakens the interactions between DNA and SWNTs, and thus activates the sensor fluorescence. On the other hand, because Cys is a strong Ag⁺ binder, it can remove Ag⁺ from C–Ag⁺–C base pairs and deactivates the sensor fluorescence by rewrapping the dye‐labeled oligonucleotides around the SWNT. In this way, the fluorescence signal‐on and signal‐off of a DNA/SWNT sensor can be used to detect aqueous Ag⁺ and Cys, respectively. This sensing platform exhibits high sensitivity and selectivity toward Ag⁺ and Cys versus other metal ions and the other 19 natural amino acids, with a limit of detection of 1 nM for Ag⁺ and 9.5 nM for Cys. Based on these results, we have constructed a reusable fluorescent sensor by using the covalent‐linked SWNT–DNA conjugates according to the same sensing mechanism. There is no report on the use of SWNT–DNA assays for the detection of Ag⁺ and Cys. This assay is simple, effective, and reusable, and can in principle be used to detect other metal ions by substituting C–C base pairs with other native or artificial bases that selectively bind to other metal ions.     

Chiral Mesoporous Organosilica Nanospheres: Effect of Pore Structure on the Performance in Asymmetric Catalysis

(R)‐(+)‐1,1′‐Bi‐2‐naphthol ((R)‐(+)‐Binol)‐functionalized (Binol=2,2′‐dihydroxy‐1,1′‐binaphthyl) chiral mesoporous organosilica nanospheres with uniform particle size (100 to 300 nm) have been synthesized by co‐condensation of tetraethoxysilane and (R)‐2,2′‐di(methoxymethyl)oxy‐6,6′‐di(1‐propyl trimethoxysilyl)‐1,1′‐binaphthyl in a basic medium with cetyltrimethylammonium bromide as the template. Nanospheres with a radiative 2D hexagonal channel arrangement exhibit higher enantioselectivity and turnover frequency than those with a penetrating 2D hexagonal channel arrangement (94 versus 88 % and 43 versus 15 h^?1, respectively) in the asymmetric addition of diethylzinc to aldehydes. In addition, under similar conditions, the enantioselectivity of the nanospheres can be greatly improved as the structural order of the framework increases. These results clearly show that the structural order of nanospheres affects enantioselective reactions. The enantioselectivity of the nanospheres synthesized by the co‐condensation method is higher than that of nanospheres prepared by a grafting method and even higher than that of their homogeneous counterpart. These results indicate that the bite angle of (R)‐(+)‐Binol bridging in a more rigid porous network is in a more favorable position for achieving higher enantioselectivity. The efficiency of a co‐condensation method for the synthesis of high‐performance heterogeneous asymmetric catalysts is also reported.