Electrooxidation of nitrite on a silica-cerium mixed oxide carbon paste electrode

A silica-cerium mixed oxide (SiCe) was prepared by the sol-gel process, using tetraethylorthosilicate and cerium nitrate as precursors and obtained as an amorphous solid possessing a specific surface area of 459 m(2) g(-1). Infrared spectroscopy of the SiCe material showed the formation of the Si-O-Ce linkage in the mixed oxide. Scanning electron microscopy/energy dispersive spectroscopy indicated that the cerium oxide particles were homogenously dispersed on the matrix surface. X-ray diffraction and (29)Si solid-state nuclear magnetic resonance implied non-crystalline silica matrices with chemical environments that are typical for silica-based mixed oxides. X-ray photoelectron spectroscopy showed that Ce was present in approximately equal amounts of both the 3+ and 4+ oxidation states. Cyclic voltammetry data of electrode prepared from the silica-cerium mixed oxide showed a peak for oxidation of Ce(3+)/Ce(4+) at 0.76 V and electrochemical impedance spectroscopy equivalent circuit indicated a porous structure with low charge transfer resistance. In the presence of nitrite, the SiCe electrode shows an anodic oxidation peak at 0.76 V with a linear response as the concentration of the analyte increases from 3×10(-5) at 3.9×10(-3) mol L(-1).     

Neutron activation analysis for assessing chemical composition of dry dog foods

Brazil holds the second largest population of domestic dogs in the world, with 33 million dogs, only behind the United States. The annual consumption of dog food in the country is 1.75 million tons, corresponding to the World’s sixth in trade turnover. Dog food is supposed to be a complete and balanced diet, formulated with high quality ingredients. All nutrients and minerals required for an adequate nutrition of dogs are added to the formulation to ensure longevity and welfare. In this context, the present study aimed at assessing the chemical composition of dry dog foods commercialized in Brazil. Thirty-four samples were acquired in the local market of Piracicaba and analyzed by instrumental neutron activation analysis (INAA) to determine the elements As, Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sb, Sc, Se, U, and Zn. In general, the concentrations of Ca, Fe, K, Na, and Zn complied with the values required by the Association of American Feed Control Officials (AAFCO). To evaluate the safety of dog food commercialized in Brazil, further investigation is necessary to better understand the presence of toxic elements found in this study, i.e. Sb and U. INAA was useful for the screening analysis of different types and brands of dry dog foods for the determination of both essential and toxic elements.     

Effect of the modifier ion on the properties of MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> pigments

Magnesium and zinc ferrites have been prepared by the polymeric precursor method. The organic material decomposition was studied by thermogravimetry (TG) and differential thermal analysis (DTA). The variation of crystalline phases and particle morphology with calcination temperature were investigated using X-ray diffraction (XRD) and scanning electronic microscopy (SEM), respectively. The colors of the ferrites were evaluated using colorimetry. Magnesium ferrite crystallizes above 800°C, presenting a yellow- orange color with a reflectance peak at the 600–650 nm range, while zinc ferrite crystallizes at 600°C, with a reflectance peak between 650–700 nm, corresponding to the red-brick color.     

Photochemical and pharmacological aspects of nitric oxide release from some nitrosyl ruthenium complexes entrapped in sol–gel and silicone matrices

The entrapped [Ru(terpy)(L)NO](PF₆)₃, where terpy = 2,2′:6′,2″-terpyridine and L = 2,2′-bipyridine (bpy) and 3,4-diiminebenzoic acid (NH · NHq) complexes into sol–gel processed polysiloxane and silicone matrices, shows NO release characteristics when submitted to light irradiation at 355 and 532 nm, as judged by NO measurement using a NO-sensor electrode. The pharmacological properties of doped matrix showed vasodilator characteristics by visible light irradiation, which is of great interest because the target delivery system can avoid the occurrence of side effects possibly by the aquo ruthenium species. All matrices obtained showed to be amorphous materials. The scanning electron micrographs of the matrices showed irregularly shaped particles, with a broad size of 1000 μm for both matrices and homogeneous distribution.     

Spectroscopic studies of the intermolecular interactions of Congo red and tinopal CBS with modified cellulose fibers

The adsorption of Congo red and tinopal CBS dyes on cellulose fibers was investigated using electronic absorption and fluorescence spectroscopies. Hydrogen bonds appear to be relevant for the dye-fiber interactions as indicated by the solvatochromism of Congo red in water, methanol, and dimethyl sulfoxide solutions, and when adsorbed on cellulose fibers. We also demonstrate that electrostatic interactions play an important role in the dye-medium interaction, through the analysis of absorption spectra of Congo red and fluorescence spectra of tinopal in aqueous solutions containing salt and in layer-by-layer nanostructured films with poly(allylamine hydrochloride). For instance, dye adsorption was enhanced when salt was added to the dipping solution, which was explained by the synergistic effect between the conformational changes of the cellulose and changes in the solvation layer around the cellulose chains and around dye molecules. On the basis of the fluorescence results for tinopal CBS, we inferred that dye aggregation is not relevant for adsorption on the fibers. In addition, fluorescence spectroscopy is proven very sensitive for studying the organization of dye molecules in layer-by-layer films, particularly those undergoing irreversible structural changes.     

Binding-affinity predictions of HSP90 in the D3R Grand Challenge 2015 with docking,MM/GBSA,QM/MM,and free-energy simulations

We have estimated the binding affinity of three sets of ligands of the heat-shock protein 90 in the D3R grand challenge blind test competition. We have employed four different methods, based on five different crystal structures: first, we docked the ligands to the proteins with induced-fit docking with the Glide software and calculated binding affinities with three energy functions. Second, the docked structures were minimised in a continuum solvent and binding affinities were calculated with the MM/GBSA method (molecular mechanics combined with generalised Born and solvent-accessible surface area solvation). Third, the docked structures were re-optimised by combined quantum mechanics and molecular mechanics (QM/MM) calculations. Then, interaction energies were calculated with quantum mechanical calculations employing 970–1160 atoms in a continuum solvent, combined with energy corrections for dispersion, zero-point energy and entropy, ligand distortion, ligand solvation, and an increase of the basis set to quadruple-zeta quality. Fourth, relative binding affinities were estimated by free-energy simulations, using the multi-state Bennett acceptance-ratio approach. Unfortunately, the results were varying and rather poor, with only one calculation giving a correlation to the experimental affinities larger than 0.7, and with no consistent difference in the quality of the predictions from the various methods. For one set of ligands, the results could be strongly improved (after experimental data were revealed) if it was recognised that one of the ligands displaced one or two water molecules. For the other two sets, the problem is probably that the ligands bind in different modes than in the crystal structures employed or that the conformation of the ligand-binding site or the whole protein changes.     

Bacterial nanocellulose containing diethylditiocarbamate bio-curatives: physicochemical characterization and drug delivery evaluation

Bacterial nanocellulose (BNC) is a natural biopolymer produced by different strains of acetic acid bacteria. Biocompatibility, lack of immunogenicity, mechanical strength and crystallinity make BNC a highly applicable product for drug delivery and wound dressing. Previously, we demonstrated that diethylditiocarbamate (DETC), a Superoxide Dismutase 1 inhibitor, incorporated into BNC bio-curatives was effective for treating Cutaneous leishmaniasis (CL) lesions, a parasitic disease caused by Leishmania. We herein investigated the interactions between DETC and BNC. For this purpose, DETC was incorporated into BNC and thermal analysis, x-ray diffraction and Scanning electron microscopy were performed. Furthermore, in vitro DETC release and stability tests as well as degradation studies were also performed. Our results show that DETC is well incorporated into BNC, however it is short lived as suggested by degradation experiments. Future use of BNC DETC-based bio-curatives for the treatment of CL shall require further development in order to increase stability of DETC in the bio-curative.

     

Finite mixture of regression models for censored data based on scale mixtures of normal distributions

Advances in Data Analysis and Classification - In statistical analysis, particularly in econometrics, the finite mixture of regression models based on the normality assumption is routinely used to...