PROPAGATION OF SURFACE ACOUSTIC WAVES IN PRESTRESSED ANISOTROPIC LAYERED PIEZOELECTRIC STRUCTURES

The propagation of surface acoustic waves in layered piezoelectric structures withinitial stresses is investigated.The phase velocity equations are obtained for electrically free andshorted cases,respectively.Effects of the initial stresses on the phase velocity and the electrome-chanical coupling coefficient for the fundamental mode of the layered piezoelectric structures arediscussed.Numerical results for the c-axis oriented fihn of LiNbO_3 on a sapphire substrate aregiven.It is found that the fractional change in phase velocity is a linear function with the ini-tial stresses,and the electromechanical coupling factor increases with an increase of the absolutevalues of the compressive initial stresses.The results are useful for the design of surface acousticwave devices.     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

Experimental and FEM study of windshield subjected to high speed bird impact

Both experimental and finite element model (FEM) results are presented for the dynamic strength behavior of windshield subjected to bird impact. The experimental data taken from a series of high speed photographs are compared with the numerical results predicted by using FEM in which the windshield was modeled entirely with solid elements and the bird body was approximately simulated by an elastic-plastic material with failure element behavior. Effective plastic strain and element pressure were adopted as the failure criteria and once the pressure or the effective plastic strain of an element reached the critical value, the element would lose the tensile resistance capability completely. The deflection and stress distribution in the windshield were obtained. It is shown that the result from the finite element analysis agrees with those from the full-scale bird impact test. The project supported by the National Natural Science Foundation of China (10272011)     

可解内生生育率的C-K模型

Abstract. In this paper,a C-K model with solvable endogenous fertility under the strongly addi-tive utility function is presented. The discrimination conditions of the existence of the nonzerosteady states are given. Under a kind of utility function and production function,we prove thatthese conditions are satisfied and the economy at least has an optimal growth path. The position-al relationship of the multiple steady states on the plane is discussed when multiple steady statesand multiple growth paths exist. By numerical analysis ,the fertility decreses with the per capitacapital and per capita consumption increasing and increases with the per capita capital and percapita consumption decreasing on the economic growth path are obtained.     

关于无界无限维商品空间上的生产经济均衡

本文研究了无界无限维商品空间上的生产经济均衡的存在性．虽然我们把商品空间看成是Ｒｉｅｓｚ空间，但并没有在它的正锥上作任何内部假设．同时我们的结果也为现代企业或公司从事经济预测、制订生产计划、改善经营管理、提高劳动生产率以及优化经济机制提供了理论依据．     

用遗传算法拟合电力系统负荷短期预测的非线性模型

本文运用遗传算法，根据河北省１９８５—１９９０年春节期间每小时用电量的统计数字，建立了非线性回归模型（Ｇｏｍｐｅｒｔｄｚ），结果表明，遗传算法性能良好，可望成为电力系统各种非线性模型辨识的有效手段。     

一类平面五次系统的定性分析

本文研究平面五次系统（１．１），应用［４，５］的最新结果，给出了奇点Ｏ（０，０）为中心的充要条件和焦点量公式，以及（１．１）至多有一个，二个极限环的充分条件．     

选择性激光烧结成型件密度的支持向量回归预测

根据不同工艺参数（层厚、扫描间距、激光功率、扫描速度、加工环境温度、层与层之间的加工时间间隔和扫描方式）下的选择性激光烧结成型件密度的实测数据集,应用基于粒子群算法寻优的支持向量回归（SVR）方法,建立了加工工艺参数与成型件密度间的预测模型,并与BP神经网络模型进行了比较.结果表明：基于相同的训练样本和检验样本,成型件密度的SVR模型比其BP神经网络模型具有更强的内部拟合能力和更高的预测精度;增加训练样本数有助于提高SVR预测模型的泛化能力;基于留一交叉验证法的SVR模型的预测误差最小.因此,SVR是一种预测选择性激光烧结成型件密度的有效方法. 关键词： 选择性激光烧结 密度 支持向量机 回归分析     

Generalized tensor ABCD law for an elliptical Gaussian beam passing through an astigmatic optical system in turbulent atmosphere

The propagation of an elliptical Gaussian beam (EGB) through an astigmatic ABCD optical system in a turbulent atmosphere is investigated. An analytical formula for the average intensity of an EGB and a generalized tensor ABCD law for the generalized complex curvature tensor are derived. As an application example, we derived an analytical formula for the average intensity of an elliptical flat-topped beam propagating through an astigmatic ABCD optical system in a turbulent atmosphere. As a numerical example, the focusing properties of an EGB focused by a thin lens in a turbulent atmosphere are studied. It is found that the focused beam at the focal plane becomes a circular Gaussian beam when the atmospheric turbulence is strong enough, and the beam width of the circular Gaussian beam is determined by atmospheric turbulence strength, focal length of the thin lens, and wavelength of the initial beam but is independent of the initial beam widths (i.e., initial intensity distribution).