Effect of active control on optimal structures in wall turbulence

The effect of active control imposed at the wall on optimal structures in wall turbulence is studied by using a linear transient growth model.When the detection plane of the control is located in the buffer layer,the influence of the control on the transient growth of large scale motion becomes negligible as Reynolds number increases.However,if the control signal is detected at the plane located in the logarithm region,the transient growth at large scale can be greatly suppressed.New peak values of transient growth resulting from the strong blowing and suction on the wall exist.The study indicates that a proper selection of control imposed on the wall can suppress the large scale motion in the logarithmic region.     

0Interacting model of new agegraphic dark energy:observational constraints and age problem

Many dark energy models fail to pass the cosmic age test because of the old quasar APM 08279+5255 at redshift z=3.91,the ΛCDMmodel and holographic dark energy models being no exception.Inthis paper,we focus onthe topic of the age problem inthe new agegraphic dark energy(NADE)model.We determine the age of the universe in the NADE model by fitting the observational data,including type Ia supernovae(SNIa),baryon acoustic oscillations(BAO)and the cosmic microwave background(CMB).We find that the NADE model also...     

��β�ӳ��������ģ�����Ʋ����ʵĽ�����

In this paper, for a kind of risk models with heavy-tailed and delayed claims, we derive the asymptotics of the infinite-time ruin probability and the uniform asymptotics of the finite-time ruin probability. The numerical simulation results are also presented. The results of theoretical analysis and numerical simulation show that the influence of the delay for the claim payment is nearly negligible to the ruin probability when the initial capital and running-time are all large.     

繁昌窑址附近多种瓷土成分分析

繁昌窑青白瓷胎体配方工艺一直停留在理论推理阶段，尚未有确凿的测试数据和模拟实验加以证实。为深入探究繁昌窑的胎料配方工艺，选取了繁昌窑址附近的多种瓷土样品进行了测试分析，并采用了古代制瓷工艺进行了模拟烧制。主要运用了波长色散X射线荧光光谱法(WDXRF)、红外光谱（FTIR）和X射线衍射（XRD）等光谱分析方法对瓷土成分进行测试；借助同步热分析（TG-DSC）对样品烧造温度进行了探索；通过模拟烧制陶瓷样品，对繁昌窑青白瓷的烧制工艺进行了研究，并对烧制的陶瓷样品进行显微结构分析。研究表明，繁昌窑附近的几种瓷土无论是单独制胎还是添加高岭土混合制胎，其烧成温度皆接近古代繁昌窑青白瓷的烧制温度。繁昌窑附近的瓷土是可以作为制作古代青白瓷的原料之一，但由于其中的铝含量较低，不能单独用来制作青白瓷胎体的原料，繁昌窑青白瓷在制作过程中应添加了其他富铝类原料。该研究对探索古代繁昌青白瓷的生产工艺及其蕴含的科学价值，提升繁昌窑在中国陶瓷工艺技术发展史上的地位等具有重要的学术意义，并可为现代陶瓷产业技术改进提供有益启示。     

3-甲基-4-对甲基苯基-5-(2-吡啶)-1,2,4-三唑桥联的双核铜配合物的磁性理论研究

采用对称性破损态方法结合密度泛函理论,选用反铁磁双核配合物[Cu2(MMBPT)2Cl4(H2O)2.5](MMBPT=3-甲基-4-对甲基苯基-5-(2-吡啶)-1,2,4-三唑)作为研究对象,通过与实验数据相比较,探讨了不同密度泛函方法与基组对计算铜配合物交换耦合常数的准确度.结果表明,4种混合密度泛函DFT(B3LYP,B3P86,B3PW91和PBE0)的计算结果都能和实验所观察到的值-31cm-1符号一致,但只有B3PW91方法得到的结果和实验结果吻合程度最好,同时采用方法B3PW91方法计算所得的交换耦合常数Jab对基组的依赖性较大.研究表明,2个Cu(Ⅱ)离子之间弱的反铁磁相互作用主要源于单占据分子轨道SOMOs小的能量劈裂.     

航空器供油问题中完全逆序类中的多项式时间可解类

航空器供油问题是一类非线性组合优化问题,其目标函数为分式形式,该问题目前不存在多项式时间算法,也未被证明是NP完全问题。一般可以用置换来刻画n架飞机的一个供油顺序。该问题中有一类实例被称为“完全逆序类”,“完全逆序类”用动态规划算法求解计算时间为O(n2ⁿ),具有指数时间复杂度。本文通过对该“完全逆序类”问题做进一步分析,发现在“完全逆序类”中也存在着多项式时间可解的情况。定理1研究一类一次可解的情况,若问题满足定理1的条件,则求解一次即可找到其最优解;定理2研究一类多项式时间可解的情况,当问题满足定理2的条件时,其最优解可在多项式时间内获得。     

Syntheses and Crystal Structures of Two One-dimensional Cobalt(Ⅱ) Compounds with the Flexible Dipyridyl Ligan

Two one-dimensional cobalt(Ⅱ) compounds {[Co(Hbpma)(H2O)4 ] 2 ·3SO 4 ·4.5H2O} n1 and {[Co(Hbpma)(NCS) 3 (H2O)]·2.85H2O}n2 (bpma = N,N -bis(3-pyridylmethyl)amine) have been synthesized and structurally characterized by single-crystal X-ray diffraction. Complex 1 crystallizes in triclinic, space group P1 with a = 15.8780(5), b = 16.2187(5), c = 16.4858(5) , α = 91.0420(10), β = 94.5190(10), γ = 101.4360(10)°, V = 4145.7(2) 3 , C 24 H 53 Co 2 N 6 O 24.50 S 3 , M r = 1031.76, Z = 4, D c = 1.653 g/cm 3 , μ(MoKα) = 1.046 mm -1 , F(000) = 2148, S = 1.017, the final R = 0.0269 and wR = 0.0644 for 13032 observed reflections (I > 2σ(I)). For complex 2, it belongs to triclinic, space group P1 with a = 9.3761(11), b = 10.5814(13), c = 11.2972(14) , α = 85.472(2), β = 88.058(2), γ = 76.203(2)°, V = 1085.0(2) 3 , C 15 H 21.70 CoN 6 O 3.85 S 3 , M r = 502.79, Z = 2, D c = 1.539 g/cm 3 , μ(MoKα) = 1.112 mm -1 , F(000) = 519, S = 1.070, the final R = 0.0358 and wR = 0.0899 for 3466 observed reflections (I > 2σ(I)). Two complexes 1 and 2 are both found to be one-dimensional coordination polymers bridged by the protonated bpma ligands, which are assembled into three-dimensional supramolecular structures through the hydrogen bonding interactions and π-π packing interactions.     

盘旋螺旋槽管强化传热研究

用实验的方法以水为介质研究了同轴换热器的流动与传热,Re范围为30000到100000。研究表明管内摩擦阻力系数是相同情况下圆管的4到5倍,总体传热系数随管内Re的增大而增大,当Re较大时提高壳侧速度对换热性能的提升更有利。采用数值模拟的方法分别研究了同轴换热器整体的换热与流动,且和实验结果进行了比较,研究表明,受离心力的影响流体在管内产生了掺混流动,掺混流动的程度随螺距的减小而加剧,增加槽深减少了参与掺混的流体量,流体之间的掺混对换热具有积极的影响。     

5-异烟酰胺异钛酸构筑的Cu(Ⅰ)-Eu和Ni(Ⅱ)-Eu化合物的合成、晶体结构和性质研究

利用不同过渡金属盐在溶剂热中合成了2个新型杂核化合物{[CuEu₂（INAIP）₃（HCOO）（H₂O）₃]·3H₂O}_n（1）和{[NiEu₂（INAIP）₄（H₂O）₄]·4H₂O}_n（2）（INAIP=异烟酰胺吡啶基异酞酸根）,并对其进行了元素分析、IR及X-射线衍射法表征。晶体结构研究表明：配合物1和2都属于三斜晶系,P1空间群。晶胞参数：配合物1a=1.0887（3）nm,b=1.5158（4）nm,c=1.5644（2）nm,V=2.3332（10）nm³,Z=2,D_c=1.955g·cm^-3,μ=3.203mm^-1,F（000）=1352,R_int=0.027,R₁=0.0505,wR₂=0.1309。配合物2a=1.0134（3）nm,b=1.0836（6）nm,c=1.3741（2）nm,V=1.4530（9）nm³,Z=1,D_c=1.878g·cm^-3,μ=2.554mm^-1,F（000）=818,R_int=0.0458,R₁=0.0341,wR₂=0.0869。配合物1是由配体异烟酰胺吡啶基异酞酸连接而成的三维二重贯穿sqc27拓扑结构,而配合物2是由配体异烟酰胺吡啶基异酞酸连接稀土铕离子形成二维层状结构,该二维层通过Ni-O和Ni-N键连接成三维非贯穿网络结构。配合物1和2具有典型的稀土铕离子红色荧光和高的热稳定性。