Thiophene and naphthalene-based double helix: Synthesis,structures and chirality

Both racemate and enantiomer of a novel double helix,binaphthylcyclooctaterthiophene(BN-COTh),which is a DNA-like molecule constructed by two single helices intertwined with each other via covalent bonds,have been synthesized with two building blocks,cycloocta-tetrathiophene(COTh) and cyclooctadinaphthyldithiophene(CONT) fused together via Negishi coupling reaction.Another homologue,dinaphthylcyclooctaterthiophene(DN-COTh) has been employed together as a model compound.Besides the synthetic work,BN-COTh and DN-COTh have been investigated by studying their crystal structures,spectroscopic behaviors,chiral resolution and chiral characteristics,including circular dichroism(CD) spectra and optical rotations.In addition,the novel crystal of enantiomer of(R,R,R)-BN-COTh has been explored.The enantiomer molecules packing along b-axis to form a larger and extended assembly packing due to intermolecular interactions between the enantiomer molecules and chloroform molecules in crystal.     

利用高吸水树脂优化3个中学化学实验*

尝试利用高吸水树脂对“酸碱中和反应、碳酸钠和碳酸氢钠分别与稀盐酸反应、探究分子运动现象”这3个实验进行创新改进,充分利用了高吸水树脂特殊的结构作用,使3个实验的现象更加显著。改进实验操作简便,高效简洁,值得推广到一线化学课堂的演示实验或学生分组实验。     

钼酸根阴离子在增强聚苯胺包覆的镍钴层状氢氧化物的电容和析氧行为中的关键作用

理论容量大且过电位低的层状氢氧化物(LDHs)是极有前景的超级电容电池和析氧反应的电极材料;然而,体相LDHs的低电导率和活性位点不足增加了电极的内阻,降低了电极容量和产氧效率.本文采用两步法制备了聚苯胺包覆的MoO42?插层的镍钴层状双金属氢氧化物复合电极(M-LDH@PANI).随着LDH中MoO42?含量的增加,针状的LDH微球逐渐演化为具有较高比表面积的片状M-LDH微球,这为整个电极提供了更多的电化学位点.此外,非晶态的聚苯胺包覆提高了复合电极的电导率.在引入适量MoO42?插层离子时,M-LDH@PANI表现出显著强化的储能和催化性能.所获得的M-LDH@PANI-0.5在析氧反应中表现出优越的电催化活性(10 mA cm?2时的过电位为266 mV),作为超级电容电池电极则具有864.8 C g?1的高容量.采用M-LDH@PANI-0.5作为正极及以活性炭作为负极组装的超级电容电池在功率密度为8,300.0 W kg?1时能量密度为44.6 Wh kg?1,且具有优异的循环稳定性(10000次循环后保留83.9％的初始容量).本文为LDH基材料的阴离子插层改性增强材料性能的机理提供了一个非传统的解释.在上述研究基础上,采用射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)和比表面积测试(BET)等手段对样品进行了深入表征.XRD结果表明,MoO42?插层的LDH材料的层间晶面(003)的峰随着MoO42?含量的增加而逐渐消失,这是由于晶面间距越大越容易受到晶粒细化的影响,间距大的晶格更容易受到破坏,导致晶格的展宽和弱化,从而间接证明MoO42?的成功插层.SEM、HRTEM和BET测试结果表明,MoO42?的含量对材料的形貌和比表面积具有重大影响.利用XPS对样品的价态进行了研究,发现随着MoO42?含量的增加,Co和Ni的价态没有明显变化.电化学测试结果表明,电极的储能和催化性能随MoO42?含量的增加而先增加后减小.利用理论计算分析了MoO42?在LDH中的插层行为,发现少量的MoO42?有利于扩大LDH的层间间距,而过量的MoO42?则会与LDH的H原子结合,从而与电解液中的OH?竞争,导致复合电极的电化学性能下降.此外,MoO42?插层的片状微球能有效调节材料的去质子化能,大大加速电极表面的氧化还原反应.因此,MoO42?插层能够显著强化LDH基材料的超级电容电池电极和OER催化剂电化学性能.     

A purely organic D-π-A-π-D emitter with thermally activated delayed fluorescence and room temperature phosphorescence for near-white OLED

A purely organic D-π-A-π-D type emitter showing thermally activated delayed fluorescence(TADF) and room temperature phosphorescence(RTP) was designed and synthesized by utilizing the benzophenone as an acceptor and the N-phenyl-2-napthylamine as a donor moiety.It exhibits considerable TADF character in doped PMMA film and room temperature phosphorescence with a long lifetime of 74 ms at466 nm in solid state.The devices with the configuration of ITO/Mo_2 O_3(4 nm)/mCP(30 nm)/mCP:x wt%NP2 BP/TmTyPB(60 nm)/LiF(1.5 nm)/AI(100 nm) were prepared by vacuum evaporation to explore their electroluminescent performance.Intere stingly,the non-doped device has obtained near-white emission with a fluorescence emission peak at 475 nm and a phosphore scence emission peak at 563 nm having the CIE coordinate of(0.23,0.32) and the maximum external quantum efficiency of 1.09%.     

ABC三嵌段共聚物胶束从多间隔结构到多核结构转变的Monte Carlo模拟

采用Monte Carlo模拟方法研究了疏水-亲水-疏水(H-P-H)型ABC三嵌段共聚物在B嵌段的选择性溶剂中的自组装行为. 模拟结果表明, 通过调节A嵌段和C嵌段的疏水性和二者之间的不相容性, 体系中可以形成多种形貌各异的胶束. 根据胶束中疏水核结构的特点, 这些胶束大体上可以被分为多核型胶束和多间隔型胶束两种类型. 通过增强疏水嵌段的疏水性或降低A嵌段和C嵌段间的不相容性, H-P-H型ABC三嵌段共聚物胶束能够发生从多核型胶束向多间隔型胶束的转变. 进一步分析胶束中聚合物的链构象等微观结构信息发现, A嵌段和C嵌段间的排斥作用和疏水作用之间存在竞争关系, 而这种竞争关系是影响体系中形成多核型胶束还是多间隔型胶束的决定性因素.     

超浸润形状记忆海绵的制备及油-水分离性能

基于反式 1,4-聚异戊二烯(TPI)的形状记忆性能, 以聚氨酯海绵为基底, 包覆TPI制备出了一种具有疏水超亲油特性的三维多孔形状记忆海绵. 由于这种海绵具有良好的形状记忆特性, 可以通过反复按压/恢复过程, 实现对海绵孔径在微米尺寸(约875 μm)与纳米尺寸(约450 nm)间可逆调控. 利用材料特殊的浸润特征及其可控的孔尺寸, 进一步研究了其在油-水分离中的应用. 研究结果表明, 微米尺寸大孔径海绵有利于对不相溶油-水混合物进行快速高效分离, 而纳米尺寸小孔径海绵则有利于对乳液混合物进行分离, 实现了同一材料同时满足不相溶油-水混合物及乳液体系的分离要求.     

DNA环境中硒代胸腺嘧啶和腺嘌呤碱基对的激发态性质和光物理机理的理论研究

应用高精度的多态完全活化自洽场二级微扰理论方法,在量子力学/分子力学组合方法的理论框架QM(MS-CASPT2//CASSCF)/MM下,系统研究了DNA环境中2-硒和4-硒取代胸腺嘧啶和腺嘌呤碱基对(2SeT-A和4SeT-A)的最低5个电子态(S₀, S₁, S₂, T₂和T₁)的结构、性质和光物理过程. QM(MS-CASPT2//CASSCF)/MM计算揭示了DNA环境中2SeT-A和4SeT-A碱基对激发态性质和光物理过程差异性的来源,提出的机理将有助于理解DNA类似物的光物理过程,在光动力学治疗中具有潜在的应用.     

碳掺杂六方氮化硼/二硫化钼吸附还原六价铬和助催化降解有机污染物

针对二硫化钼(MoS₂)因易团聚导致去除六价铬[Cr(Ⅵ)]容量低的问题, 利用六方氮化硼(BN)良好的吸附性和化学稳定性, 以多巴胺作为BN改性剂, 通过煅烧法和水热法制得碳掺杂六方氮化硼(c-BN)负载MoS₂纳米复合材料(c-BN@MoS₂). 研究了室温条件下c-BN@MoS₂对Cr(Ⅵ)的吸附还原和助催化降解有机污染物的性能. 实验结果表明, c-BN@MoS₂在40 min内对50 mg/L的Cr(Ⅵ)吸附还原去除率高达95%以上, 且以将 Cr(Ⅵ)还原至Cr(Ⅲ)为主, 在pH值为2、 温度为25 ℃条件下去除Cr(Ⅵ)最大容量可达401 mg/g, 显著高于 MoS₂(98 mg/g). 分析显示, c-BN不仅提高了MoS₂的平均孔径, 还可促进MoS₂生成金属特性的1T相, 有利于吸附Cr(Ⅵ)和加快氧化还原过程中的电子转移. 在Fe²⁺/PMS(过一硫酸氢盐)催化体系加入c-BN@MoS₂, 该体系对磺胺甲恶唑的降解性能明显增强, 其反应速率常数提高3倍, 这主要归因于c-BN@MoS₂明显加快了Fe³⁺到Fe²⁺的转变, 导致更多?OH产生, 达到增强降解污染物的目标.     

Built-in piezoelectric field improved photocatalytic performance of nanoflower-like Bi2WO6 using low-power white LEDs

Photocatalysis technology has been proved to be a potential strategy for removal of organic dyes, however high-power light sources are generally necessary to initiate photocatalytic reaction. In this work, we employed an excellent photocatalyst of Bi₂WO₆ with visible light harvest and meanwhile an intrinsic ferroelectricity, which realized the efficient degradation of organic dye via the synergetic photopiezocatalysis. Through coupling the illumination by a low-power (9 W) LED and the ultrasonic vibration (120 W) by an ultrasonic cleaner, the nanoflower-like Bi₂WO₆ composed of ultrathin nanosheets showed a much more enhanced photopiezocatalysis performance for purification of organic dye than the individual photocatalysis and piezocatalysis. Furthermore, the high mineralization efficiency and the good durability of the Bi₂WO₆ catalyst were demonstrated. The possible mechanism of photopiezocatalysis was finally proposed, where the ultrasound-induced piezoelectric field in Bi₂WO₆ drove photo-generated electrons and holes to diffuse along opposite directions, consequently promoting the separation efficiency of charge carriers. This work indicates that the synergetic photopiezocatalysis by coupling irradiation and ultrasonic vibration is a promising strategy to purify organic pollutants in wastewater.     

双功能改性的T型分子筛膜用于有机溶剂脱水

将3-氨丙基三乙氧基硅烷（APTES）引入到T型分子筛膜表面,用以修饰多晶膜合成过程中产生的缺陷。X射线衍射、场发射扫描电子显微镜、X射线光电子能谱和FT-IR等方法的表征结果显示,APTES通过“键合”的形式被成功地修饰到膜表面上。APTES层起到2个作用：一是提高膜的亲水性;二是减少膜层的缺陷。将修饰后的膜应用在348 K、90%的异丙醇水溶液的脱水时,该膜表现出比较高的分离因子和通量。该方法重复性良好,5个修饰后的膜样品的选择性平均增加了大约8倍（从359±23增加到2 934±183）,而渗透通量仅仅从（3.52±0.10） kg·m^-2·h^-1降低到（3.06±0.14） kg·m^-2·h^-1（减少13.07%）。在363 K下,修饰的膜经过100 h的连续测试,膜渗透测得的水含量均可达到99.50%以上,表明修饰后的膜性能较稳定。