Eu2O3纳米晶谱带特征及光伏性质的研究

利用表面光电压谱技术对不同粒径的Eu2O3纳米晶进行光吸收特性的研究，并结合紫外－可见反射吸收光谱对其谱带进行解析，实验发现，随着样品粒径的变小，部分f→f跃迁的吸收带明显增加强并发生红移；在300－500nm区间有一个宽吸收边带，此带可归属于O2p→Eu4f的电荷转移跃迁。     

Sn-C60薄膜的紫外吸收光谱和X-射线衍射谱分析

对Sn-C60薄膜进行紫外可见光吸收，X-射线衍射和扫描电镜的测定结果显示，薄膜样品紫外可见光吸收的两个短波段吸收峰比纯C60薄膜的吸收峰显著下降，说明Sn-C60薄膜的电子光吸收跃迁为间接跃迁，能带中有杂质能级的存在；样品的X射线衍射峰则对应于面心立方结构；扫描电镜结果显示薄膜为纳米级颗粒组成。     

ZnAl2O4：Tb3+荧光粉的合成、结构及其光学性能研究

通过溶胶-凝胶法制备出不同Tb³⁺掺杂浓度和不同二次煅烧温度下的ZnAl₂O₄:Tb³⁺荧光粉, 并利用X射线衍射(XRD)和荧光光谱等对样品进行了表征。由XRD结果可知,当Tb³⁺掺杂的摩尔分数不大于9%,二次煅烧温度在600℃以上时,所得粉体为结晶性良好的尖晶石相。在紫外光激发下,ZnAl₂O₄:Tb³⁺荧光粉的发射光谱由位于488 nm(⁵D₄→⁷F₆)、542 nm(⁵D₄→⁷F₅)、587 nm(⁵D₄→⁷F₄ )和621.5 nm(⁵D₄→⁷F₃)的4个发射峰组成。研究发现,Tb³⁺的掺杂浓度和二次煅烧温度对样品发光强度有着重要影响,当Tb³⁺的摩尔分数为5%,二次煅烧温度为900℃时,ZnAl₂O₄:Tb³⁺荧光粉的发光最强,继续增加Tb³⁺掺杂浓度或提高煅烧温度,分别会出现浓度猝灭和温度猝灭现象。     

A modular attachment mechanism for software network evolution

A modular attachment mechanism of software network evolution is presented in this paper. Compared with the previous models, our treatment of object-oriented software system as a network of modularity is inherently more realistic. To acquire incoming and outgoing links in directed networks when new nodes attach to the existing network, a new definition of asymmetric probabilities is given. Based on this, modular attachment instead of single node attachment in the previous models is then adopted. The proposed mechanism is demonstrated to be able to generate networks with features of power-law, small-world, and modularity, which represents more realistic properties of actual software networks. This work therefore contributes to a more accurate understanding of the evolutionary mechanism of software systems. What is more, explorations of the effects of various software development principles on the structure of software systems have been carried out, which are expected to be beneficial to the software engineering practices.     

用于农田土壤监测的高光谱成像仪

土壤光谱分析技术具有分析速度快、成本低、无危险、无破坏、可同时反演多种成分等特点,基于高光谱成像技术可以快速获取土壤性质及其空间分布特征。本文针对农田土壤监测的需求,设计了一种无人机载高光谱成像仪,选择Offner凸光栅光谱成像系统实现了无谱线弯曲和无色畸变的设计结果。400～1 000nm波长范围内的衍射效率为15%～30%,对地成像效果清晰,在3 km飞行高度可以获得覆盖宽度为0.6km、地面分辨率为0.6 m的地物目标高光谱图像,可提供0.4～1.0μm波长范围内120个谱段的高光谱图像,光谱数据准确、稳定。结果表明,该高光谱成像仪满足设计要求且可以快速获得高精度成像光谱信息,适合用于对农田土壤的监测。     

不同有机碱对乙酰水杨酸铽配合物荧光性能的影响

有机碱对参与合成的铽配合物荧光性质具有非常大的影响。利用三乙胺(TEL)、三丙胺(TPL)和三丁胺(TBL)分别作为有机碱、乙酰水杨酸(aspirin)作为配体在无水乙醇溶液中制备了3种铽配合物溶液。通过紫外光谱、荧光光谱、绝对量子产率和荧光寿命的表征发现3种铽配合物的确具有不同的荧光性能。相同浓度条件下,随着有机胺碳链长度的增加,3种铽配合物的荧光发射强度依次增大。由3种有机碱所得到的铽配合物Tb(aspirin)3TEL、Tb(aspirin)3TPL和Tb(aspirin)3TBL的绝对量子效率分别为11.41%,12.85%和18.63%,在无水乙醇溶液中的荧光寿命分别为6.316 956×10-4,7.018 974×10-4,7.346 807×10-4s。实验结果表明,有机碱参与了铽配合物的分子组成。     

Al组分对MOCVD制备的AlxGa1-xN/AlN/GaN HEMT电学和结构性质的影响

采用金属有机化合物化学气相沉积（MOCVD）方法制备了不同Al组分（x=0.19,0.22,0.25,0.32）的Al_xGa_1-xN/AlN/GaN 结构的高电子迁移率晶体管（HEMT）材料。研究了Al_xGa_1-xN势垒层中Al组分对HEMT材料电学性质和结构性质的影响。研究结果表明,在一定的Al组分范围内,二维电子气（2DEG）浓度和迁移率随着Al组分的升高而增大。然而,过高的Al组分导致HEMT材料表面粗糙度增大,2DEG迁移率降低,该实验现象在另一方面得到了原子力显微镜测试结果的验证。在最佳Al组分（25%）范围内,获得的 HEMT材料的2DEG浓度和室温迁移率分别达到1.2×10¹³ cm^-2和1 680 cm²/（V·s）,方块电阻低至310 Ω/□。     

Determination of the calcium species in coal chars by Ca K-edge XANES analysis

Ca-based additives have been widely used as a sulfur adsorbent during coal pyrolysis and gasification. The Ca speciation and evolution during the pyrolysis of coal with Ca additives have attracted great attention. In this paper, Ca species in the coal chars prepared from the pyrolysis of Ca(OH)2 or CaCO3-added coals are studied by using Ca K-edge X-ray absorption near-edge structural spectroscopy. The results demonstrate that Ca(OH)2 , CaSO4 , CaS and CaO coexist in the Ca(OH)2-added chars, while Ca(OH)2 and CaSO4 are the main species in the Ca(OH)2-added chars. Besides, a carboxyl-bound Ca is also formed during both the pyrolysis for the Ca(OH)2-added and the CaCO3-added coals. A detailed discussion about the Ca speciation is given.     

CL20-TNT共晶高温热解的ReaxFF/lg反应力场分子动力学模拟

ReaxFF/lg势函数是在ReaxFF的基础上增加了对范德华引力的描述, 因此可以更好地用于描述晶体密度和结构, 而含能材料密度很大程度上影响着爆轰的宏观性质(如爆速、反应区宽度、能量输出结构等). 本文采用ReaxFF/lg反应力场分析了高温条件下凝聚相CL20-TNT共晶的初始分解情况, 并通过简单的指数函数拟合势能演化曲线获得了平衡和诱导期以及整体反应时间, 随后通过反应速率方程得到了共晶热解的活化能E_a (185.052 kJ/mol). CL20-TNT共晶热解过程中CL20分子均在TNT之前分解完毕, 并且随着温度的升高, TNT的分解速率明显加快, 温度越高二者完全分解所需的时间越接近. 有限时间步长下的产物识别分析显示主要产物为NO₂, NO, CO₂, N₂, H₂O, HON, HNO₃. NO₂是C–NO₂和N–NO₂键均裂共同贡献的结果, 其产量快速地增加, 达到峰值后开始减少, 此过程伴随着NO₂参与其他反应使得NO₂中的N原子进入到其他的含N 分子中. 次要产物主要为CO, N₂O, N₂O₅, CHO. N₂O具有很强的氧化能力, 使其分布有着剧烈的波动特征. 关键词： 共晶结构 高温热解 ReaxFF/lg 势函数 分子动力学     

Effect of active control on optimal structures in wall turbulence

The effect of active control imposed at the wall on optimal structures in wall turbulence is studied by using a linear transient growth model.When the detection plane of the control is located in the buffer layer,the influence of the control on the transient growth of large scale motion becomes negligible as Reynolds number increases.However,if the control signal is detected at the plane located in the logarithm region,the transient growth at large scale can be greatly suppressed.New peak values of transient growth resulting from the strong blowing and suction on the wall exist.The study indicates that a proper selection of control imposed on the wall can suppress the large scale motion in the logarithmic region.