Electrospray sample deposition for matrix-assisted laser desorption/ionization (MALDI) and atmospheric pressure MALDI mass spectrometry with attomole detection limits

Electrospray sample deposition was explored for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). In this method, nanoliter volumes of matrix/analyte mixture were electrosprayed from a high voltage biased (1-2 kV) fused-silica capillary onto a grounded MALDI plate mounted 100-500 microm from the capillary outlet. Electrospray deposition with these conditions produced sample spots 200-300 microm in diameter thus matching the laser spot size. Varying spray voltage and distance resulted in different crystal sizes and volatilization rates for alpha-cyano-4-hydroxycinnamic acid matrix. Best results were obtained when the sample was deposited as wet droplets as opposed to deposition as dried solid. Under 'wet-spray' conditions, 2-4 microm diameter crystals were formed and detection limits for several neuropeptides were 0.7-25 amol. Samples could be pre-concentrated on the plate by spraying continuously and allowing sample to evaporate in a small spot. Sample volumes as large as 580 nL were deposited yielding a detection limit of 35 pM for neurotensin 1-11. Electrospray sample deposition yielded similar results when using atmospheric pressure-MALDI coupled with a quadrupole ion trap mass spectrometer, except that the sensitivity was approximately seven-fold worse.     

Antimycobacterial activity of mixed-ligand copper quinolone complexes

New mixed-ligand Cu^II, complexes: [Cu(cf)(phen)Cl)](BF₄) · 4H₂O (3), [Cu(cf)(bipy)(Cl)](BF₄) · 2H₂O (4) and [Cu(cf)(dafone)(Cl)](BF₄) · 2H₂O (5) (cf = ciprofloxacin, phen = 1,10-phenanthroline, bipy = 2,2-bipyridine and dafone = 4,5-diazafluoren-9-one) have been isolated and characterized by elemental analyses, i.r., u.v.–vis. spectra, magnetic susceptibility and cyclic voltammetry. Complex (4) crystallizes in the monoclinic space group P2₁/n with a = 13.8919(13) Å, b = 14.5718(13) Å, c = 14.0725(13) Å, = 95.150(2)°, V=2837.2(5) ų. All complexes possess square-pyramidal geometry. The antimycobacterial activity of ciprofloxacin and complexes (3–5) has been evaluated against Mycobacterium smegmatis, which shows clear enhancement in the antitubercular activity upon copper complexation with N—N donors.     

Conformation and vibrational spectra of 1-bromo-1,5-hexadiyne (bromobipropargyl)

The IR spectra of 1-bromo-1,5-hexadiyne (bromobipropargyl) as a vapour, liquid and crystalline solid and in several solvents have been recorded. Raman spectra were obtained for the liquid (including polarization measurements) and the crystal.The data were interpreted in terms of two conformers, trans and gauche, in the vapour and liquid states and one, trans, in the crystal. The conclusion that the trans conformer was the one present in the crystal was based on several independent pieces of evidence. Vibrational assignments were made, supported by normal coordinate calculations.     

Trithiacyclononane as a ligand for potential technetium and rhenium radiopharmaceuticals: synthesis of [M(9S3)(SC2H4SC2H4S)][BF4] (M = 99Tc, Re, 188Re) via C-S bond cleavage

Chemical or electrochemical reduction of the 1,4,7-trithiacyclononane (9S3) complexes [MII(9S3)2][BF4]2 (M = Re (3a) or Tc (3b)) results in instantaneous C-S bond cleavage to yield ethene and the stable MIII thiolate complexes [MIII(9S3)L][BF4] (M = Re (4a) or Tc (4b), L = SCH2CH2SCH2CH2S). Compounds 4 have been characterized by 1H NMR spectroscopy, and the pseudo-octahedral geometry of 4b has been confirmed by X-ray crystallography. Upon electrochemical reduction 4a loses ethene, while 4b can be reversibly reduced to [TcII(9S3)L], which is then further reduced to Tc(I) with loss of ethene. Successive ethene loss is observed in the mass spectra of compounds 3 and 4. The radiosynthesis of 4a with 188Re can be comfortably completed within 10 min starting with 188ReO4- from a 188W/188Re generator, with a radiochemical yield in excess of 90%, and thus represents a practical approach to the preparation of stable 188Re (and 99mTc) thioether complex derivatives/conjugates for clinical use. Crystal data: 4b, C10H20S6Tc, orthorhombic Pbca, a = 12.233(2) A, b = 14.341(2) A, c = 20.726(3) A, Z = 8.     

Practical synthesis of 1-aryl-6-(hydroxymethyl)-2-ketopiperazines via a 6-exo amide-epoxide cyclization

[reaction: see text] Chiral 1-aryl-6-(hydroxymethyl)-2-ketopiperazines can be prepared via an operationally simple, 6-exo epoxide ring-opening cyclization to form the ketopiperazine C6-N1 bond in high yields and with excellent enantiomeric purity.     

Organometallic complexes for nonlinear optics: Part 32: Synthesis, optical spectroscopy and theoretical studies of some osmium alkynyl complexes

The complexes trans-[Os(CCPh)Cl(dppe)₂] (1), trans-[Os(4-CCC₆H₄CCPh)Cl(dppe)₂] (2), and 1,3,5-{trans-[OsCl(dppe)₂(4-CCC₆H₄CC)]}₃C₆H₃ (3) have been prepared. Cyclic voltammetric studies reveal a quasi-reversible oxidation process for each complex at 0.36–0.39 V (with respect to the ferrocene/ferrocenium couple at 0.56 V), assigned to the Os^II/III couple. In situ oxidation of 1–3 using an optically transparent thin-layer electrochemical (OTTLE) cell affords the UV–Vis–NIR spectra of the corresponding cationic complexes 1⁺–3⁺; a low-energy band is observed in the near-IR region (11 000–14 000 cm⁻¹) in each case, in contrast to the neutral complexes 1–3 which are optically transparent below 20 000 cm⁻¹. Density functional theory calculations on the model compounds trans-[Os(CCPh)Cl(PH₃)₄] and trans-[Os(4-CCC₆H₄CCPh)Cl(PH₃)₄] have been used to rationalize the observed optical spectra and suggest that the low-energy bands in the spectra of the cationic complexes can be assigned to transitions involving orbitals delocalized over the metal, chloro and alkynyl ligands. These intense bands have potential utility in switching nonlinear optical response, of interest in optical technology.     

Generation of AuPd22/Au2Pd21 analogues of the high-nuclearity Pd23(CO)20(PEt3)10 cluster containing 19-atom centered hexacapped-cuboctahedral (nu 2-octahedral) metal fragment: structural-to-synthesis approach concerning formation of Au2Pd21(CO)20(PEt3)10

Reactions of Pd(PEt(3))(2)Cl(2) and Au(PPh(3))Cl in DMF with NaOH under CO atmosphere gave rise to the unique capped three-shell homopalladium Pd(145)(CO)(x)(PEt(3))(30)(x approximately 60) and two neutral Au-Pd clusters: Au(2)Pd(21)(CO)(20)(PEt(3))(10) (1) and Au(2)Pd(41)(CO)(27)(PEt(3))(15)(following article). Similar reactions with Pd(PMe(3))(2)Cl(2) being used in place of Pd(PEt(3))(2)Cl(2) afforded Au(2)Pd(21)(CO)(20)(PMe(3))(10) (2), the trimethylphosphine analogue of, and the electronically equivalent [AuPd(22)(CO)(20)(PPh(3))(4)(PMe(3))(6)](-) monoanion (3) as the [PPh(4)](+) salt. Each of these three air-sensitive 23-atom heterometallic Au-Pd clusters was obtained in low yields (7-25%); however, their geometrical similarities with the known cuboctahedral-based homopalladium Pd(23)(CO)(20)(PEt(3))(10) (4), recently obtained in good yields from Pd(10)(CO)(12)(PEt(3))(6), suggested an alternative preparative route for obtaining. This "structure-to-synthesis" approach afforded 1 in 60-70% yields from reactions of Pd(10)(CO)(12)(PEt(3))(6) and Au(PPh(3))Cl in DMF with NaOH under N(2) atmosphere. Both the compositions and atomic arrangements for 1, 2 and 3 were unambiguously established from low-temperature single-crystal CCD X-ray crystallographic determinations in accordance with their nearly identical IR carbonyl frequencies. Cluster 1 was also characterized by (31)P[(1)H] NMR, cyclic voltammetry (CV) and elemental analysis. The virtually identical Au(2)Pd(21) core-architectures of 1 and 2 closely resemble that of 4, which consists of a centered hexa(square capped)-cuboctahedral Pd(19) fragment of pseudo-O(h) symmetry that alternatively may be viewed as a centered Pd(19)nu(2)-octahedron (where nu(n) designates (n + 1) equally spaced atoms along each edge). [AuPd(22)(CO)(20)(PPh(3))(4)(PMe(3))(6)](-) (3) in the crystalline state ([PPh(4)](+) salt) consists of two crystallographically independent monoanions 3A and 3B; a superposition analysis ascertained that their geometries are essentially equivalent. A CV indicates that reversibly undergoes two one-electron reductions and two one-electron oxidations; these reversible redox processes form the basis for an integrated structural/electronic picture that is compatible with the existence of the electronically-equivalent 1-3 along with the electronically-nonequivalent 4 (with two fewer CVEs) and other closely related species.     

Formation of cis-enediyne complexes from rhenium alkynylcarbene complexes

Dimerization of the alkynylcarbene complex Cp(CO)(2)Re=C(Tol)C(triple bond)CCH(3) (8) occurs at 100 degrees C to give a 1.2:1 mixture of enediyne complexes [Cp(CO)(2)Re](2)[eta(2),eta(2)-TolC(triple bond)CC(CH(3))=C(CH(3))C(triple bond)CTol] (10-Eand 10-Z), showing no intrinsic bias toward trans-enediyne complexes. The cyclopropyl-substituted alkynylcarbene complex Cp(CO)(2)Re=C(Tol)C(triple bond)CC(3)H(5) (11) dimerizes at 120 degrees C to give a 5:1 ratio of enediyne complexes [Cp(CO)(2)Re](2)[eta(2),eta(2)-TolC(triple bond)C(C(3)H(5))C=C(C(3)H(5))C(triple bond)CTol] (12-E and 12-Z); no ring expansion product was observed. This suggests that if intermediate A formed by a [1,1.5] Re shift and having carbene character at the remote alkynyl carbon is involved, then interaction of the neighboring Re with the carbene center greatly diminishes the carbene character as compared with that of free cyclopropyl carbenes. The tethered bis-(alkynylcarbene) complex Cp(CO)(2)Re=C(Tol)C(triple bond)CCH(2)CH(2)CH(2)C(triple bond)CC(Tol)= Re(CO)(2)Cp (13) dimerizes rapidly at 12 degrees C to give the cyclic cis-enediyne complex [Cp(CO)(2)Re](2)[eta(2),eta(2)-TolC(triple bond)CC(CH(2)CH(2)CH(2))=CC(triple bond)CTol] (15). Attempted synthesis of the 1,8-disubstituted naphthalene derivative 1,8-[Cp(CO)(2)Re=C(Tol)C(triple bond)C](2)C(10)H(6) (16), in which the alkynylcarbene units are constrained to a parallel geometry, leads to dimerization to [Cp(CO)(2)Re](2)(eta(2),eta(2)-1,2-(tolylethynyl)acenaphthylene] (17). The very rapid dimerizations of both 13 and 16 provide compelling evidence against mechanisms involving cyclopropene intermediates. A mechanism is proposed which involves rate-determining addition of the carbene center of A to the remote alkynyl carbon of a second alkynylcarbene complex to generate vinyl carbene intermediate C, and rearrangement of C to the enediyne complex by a [1,1.5] Re shift.     

In vitro mineral availability from digested tea: a rich dietary source of managanese

Tea is potentially a rich source of some dietary metals and approximately 70 l are drunk per capita per year in the UK. In particular, tea may be an important source of Mn, since leaf tea contains 350-900 micrograms g-1 of this essential element. However, the leaching and bioavailability of Mn from tea have been little studied, so a recently developed in vitro assay was applied to compare the bioavailability of Mn from tea infusions with that of other major and trace essential elements. Analysis of tea infusions before digestion showed that 1.0 l contained 115% of the average daily dietary intake of Mn but < 6% of all other minerals. Samples of these infusions were incubated with human gastric juice (37 degrees C, 1 h) and some were then adjusted to pH 6.5 to simulate intestinal pH. All were centrifuged through ultrafilters with molecular mass cut-offs of 3, 10 and 30 kDa. The percentages of ultrafilterable (< 3 kDa) elements following simulated gastrointestinal digestion were (n = 3; mean +/- s) Ca 47.7 +/- 10.7, Cu 45.3 (n = 1), Fe < 5, Mg 66.4 +/- 1.6, Mn 39.8 +/- 11.4, K 40.3 +/- 2.2, Na 100.0 +/- 5.3 and Zn 33.7 +/- 1.1. Hence the ultrafilterability of elements showed the general trend M+ > M2+ > M3+, which is probably the inverse of the order of their strengths of binding to tea polyphenols. However, Mn was the only element found in significant dietary amounts in tea, and under simulated intestinal conditions was still 40% bioavailable.     

Determination of adhesion in bitumen-mineral systems by heat-of-immersion calorimetry

Chemical factors influencing bitumen-mineral adhesion have been examined by heat-of-immersion calorimetry. Two chosen minerals (quartz and calcite) and bitumen derived from Venezuelan and Middle East crude oils were characterised and the energy released by the bitumen-mineral interaction measured. Heat-of-immersion data are correlated with the concentration of heteroatomic species present in the bitumen and the structure of the mineral surfaces. Bitumen-quartz bonding is promoted by the presence of basic species in the bitumen and bitumen-calcite adhesion is favoured by the presence of acidic groups. A mechanism is proposed to account for the observed bond energies.