Development and Validation of a Stability-Indicating UPLC Method for the Determination of Hexoprenaline in Injectable Dosage Form Using AQbD Principles

A novel and efficient stability-indicating, reverse phase ultra-performance liquid chromatographic (UPLC^®) analytical method was developed and validated for the determination of hexoprenaline in an injectable dosage form. The development of the method was performed using analytical quality by design (AQbD) principles, which are aligned with the future requirements from the regulatory agencies using AQbD principles. The method was developed by assessing the impact of ion pairing, the chromatographic column, pH and gradient elution. The development was achieved with a Waters Acquity HSS T3 (50 × 2.1 mm i.d., 1.8 µm) column at ambient temperature, using sodium dihydrogen phosphate 5 mM + octane-1-sulphonic acid sodium salt 10 mM buffer pH 3.0 (Solution A) and acetonitrile (Solution B) as mobile phases in gradient elution (t = 0 min, 5% B; t = 1 min, 5% B; t = 5 min, 50% B; t = 7 min, 5% B; t = 10 min, 5% B) at a flow rate of 0.5 mL/min and UV detection of 280 nm. The linearity was proven for hexoprenaline over a concentration range of 3.50–6.50 µg/mL (R² = 0.9998). Forced degradation studies were performed by subjecting the samples to hydrolytic (acid and base), oxidative, and thermal stress conditions. Standard solution stability was also performed. The proposed validated method was successfully used for the quantitative analysis of bulk, stability and injectable dosage form samples of the desired drug product. Using the AQbD principles, it is possible to generate methodologies with enhanced knowledge, which can eventually lead to a reduced regulatory risk, high quality data and lower operational costs.     

Determination of polycyclic aromatic hydrocarbons in seawater by high-performance liquid chromatography with fluorescence detection following micelle-mediated preconcentration

In this work, the nonionic surfactant polyoxyethylene-10-lauryl ether has been used for the extraction and preconcentration of 14 polycyclic aromatic hydrocarbons, classified as priority pollutants by the US Environmental Protection Agency, from seawater samples. The cloud-point preconcentration previous separation by HPLC and quantification using fluorimetric detection and wavelength programming allow to determine these pollutants with detection limits ranging from 1.0 to 1.5 x 10(2) ng/l with RSDs better than 10.4%. The methodology is evaluated using well-established extraction and preconcentration methods and GC-MS.     

Osmium catalyzed asymmetric dihydroxylation of methyl trans-cinnamate in ionic liquids, followed by supercritical CO2 product recovery

In this work, osmium-catalyzed asymmetric dihydroxylation (AD) of methyl trans-cinnamate was studied. Osmium and chiral ligand catalysts were immobilized in ionic liquid only, without any other reaction solvents, while the recovery of the product was performed by extraction with supercritical CO₂, and compared with results obtained by extractions with organic solvents such as hexane and diethyl ether. In supercritical CO₂ extraction experiments, optimal extraction pressure was found and ionic liquid chosen, so that the highest reaction yields coupled with lowest osmium content in the crude product can be achieved. Finally, recycle experiments of the same (ionic liquid + catalytic system) mixture were successfully conducted. Application of ionic liquids and supercritical CO₂ in osmium catalyzed AD allows for the isolation of the diol basically without contamination with osmium, in high yield and enantiomeric excess, and it makes possible the efficient reuse of ionic liquid solvent and the catalytic system.     

Instrumental Dependent Dissociations of n-Propyl/Isopropyl Phosphonate Isomers: Evaluation of Resonant and Non-Resonant Vibrational Activations

Structural elucidation and distinction of isomeric neurotoxic agents remain a challenge. Tandem mass spectrometry can be used for this purpose in particular if a “diagnostic” product ion is observed. Different vibrational activation methods were investigated to enhance formation of diagnostic ions through consecutive processes from O,O-dialkyl alkylphosphonates. Resonant and non-resonant collisional activation and infrared multiphoton dissociation (IRMPD) were used with different mass spectrometers: a hybrid quadrupole Fourier transform ion cyclotron resonance (Qh-FTICR) and a hybrid linear ion trap-Orbitrap (LTQ/Orbitrap). Double resonance (DR) experiments, in ion cyclotron resonance (ICR) cell, were used for unambiguous determination of direct intermediate yielding diagnostic ions. From protonated n-propyl and isopropyl O-O-dialkyl-phosphonates, a diagnostic m/z 83 ion characterizes the isopropyl isomer. This ion is produced through consecutive dissociation processes. Conditions to favor its formation and observation using different activation methods were investigated. It was shown that with the LTQ, consecutive experimental steps of isolation/activation with modified trapping conditions limiting the low mass cut off (LMCO) effect were required, whereas with FT-ICR by CID and IRMPD the diagnostic ion detection was provided only by one activation step. Among the different investigated activation methods it was shown that by using low-pressure conditions or using non-resonant methods, efficient and fast differentiation of isomeric neurotoxic agents was obtained. This work constitutes a unique comparison of different activation modes for distinction of isomers showing the instrumental dependence characteristic of the consecutive processes. New insights in the dissociation pathways were obtained based on double-resonance IRMPD experiments using a FT-ICR instrument with limitation at low mass values.

Physicochemical Characterization and Paper Spray Mass Spectrometry Analysis of Myrciaria Floribunda (H. West ex Willd.) O. Berg Accessions

Myrciaria floribunda, also known as rumberry, is a tree native to the Brazilian Atlantic Forest, where its fruits have the potential for commercial use. This study evaluates the antioxidant potential, determines the phytochemical profile, and chemically characterizes the rumberry fruit. Accessions were sampled from the Rumberry Active Germplasm Bank of the Federal University of Alagoas, Brazil. Physical characteristics, chemical characteristics, and phenolic compound content were analyzed. Chemical profile characterization was carried out using PSMS. Accessions had an average weight of 0.86 g. Accession AC137 presented a higher pulp yield (1.12 g). AC132 and AC156 had larger fruits, AC137 showed greater firmness (5.93 N), and AC160 had a higher and total phenolic content ratio (279.01 ± 11.11). Orange-colored accessions scored higher in evaluated parameters, except for AC160 for phenolic content. Thirty-two compounds were identified on positive ionization mode and 42 compounds on negative ionization mode using PSMS. Flavonoids, followed by the derivatives of benzoic acid, sugars, and phenylpropanoids, were the most prominent. Myricitrin, quercitrin, and catechin stand out as flavonoids that have been reported in previous studies with antioxidant and antimicrobial properties, in addition to health and therapeutical benefits, demonstrating the potential of the rumberry fruit.     

Rh(II) catalysed intramolecular C-H insertion of diazo substrates in water: a simple and efficient approach to catalyst reuse

Water is an efficient solvent for the Rh2(OAc)4 catalysed intramolecular C-H insertion of a range of diazo substrates without competitive water insertion. Due to the high solubility and stability of the catalyst in water, the catalyst can be efficiently reused.     

Determination of N-nitrosamines by HPTLC with Fluorescence Detection — Use of Non-Ionic Surfactants as Enhancing Agents

JPC – Journal of Planar Chromatography – Modern TLC - The dansyl derivatives of N-nitrosodimethylamine, N-nitrosodi-ethylamine, and N-nitrosodibuthylamine have been separated by HPTLC...     

Selective recovery of solutes from ionic liquids by pervaporation--a novel approach for purification and green processing

Non-porous membranes with the selective layer consisting of hydrophilic or hydrophobic polymers have been applied for the quantitative and selective recovery of solutes with different physico-chemical properties from a room-temperature ionic liquid, ([bmim][PF6]).     

Construction of topological defect networks with complex scalar fields

This work deals with the construction of networks of topological defects in models described by a single complex scalar field. We take advantage of the deformation procedure recently used to describe kinklike defects in order to build networks of topological defects, which appear from complex field models with potentials that engender a finite number of isolated minima, both in the case where the minima present discrete symmetry, and in the non-symmetric case. We show that the presence of symmetry guide us to the construction of regular networks, while the non-symmetric case gives rise to irregular networks which spread throughout the complex field space. We also discuss bifurcation, a phenomenon that appear in the non-symmetric case, but is washed out by the deformation procedure used in the present work.     

Influence of surface composition on hydrogen peroxide decomposition catalyzed by Co(II) aminopyridine-supported compounds on amorphous silica gel

Cobalt compounds supported on 2-, 3-, and 4-aminopyridine-modified silica surfaces, named Sil2Co, Sil3Co, and Sil4Co, respectively, were used to catalyze the decomposition of hydrogen peroxide on ethanolic solutions at 293, 298, and 303 K. The calculated k values (x10(-4) s(-1)) for Sil2Co, Sil3Co, and Sil4Co are 0.65, 1.24, and 4.78 (293 K); 1.23, 1.87, and 6.33 (298 K); and 1.80, 2.80, and 10.30 (303 K), respectively. All obtained results evidence that such decomposition is a first-order reaction. Zinc-, nickel-, and copper-supported compounds were also tested, but exhibited a very low catalytic activity. By using the k values at 298 and 303 K, and employing the equation ln (k1/k2) = E(a)/R(1/T2-1/T1), the activation energy values for the considered reaction were Sil2Co = 57.20, Sil3Co = 60.60, and Sil4Co = 73.10 kJ mol(-1), respectively. The low values calculated for E(a) are in agreement with a free-radical mechanism.