Mass resolved MPI spectra of methyl iodide in the 430-490 nm region

The mass resolved multiphoton ionization (MPI) spectra of methyl iodide were obtained in the 430-490 nm region using a time-of-flight (TOF) mass spectrometer. They have the same vibrational structure, which testifies that the fragment species, in the wavelength region under study, are from the photodissociation of multiphoton ionized molecular parent ions. Some features in the spectra are identified as three-photon excitations to 6p and 7s Rydberg states of methyl iodide. Two new vibrational structures of some Rydberg states are observed. The mechanism of ionization and dissociation is also discussed.     

Visible light driven deuteration of formyl C–H and hydridic C(sp3)–H bonds in feedstock chemicals and pharmaceutical molecules

Deuterium labelled compounds are of significant importance in chemical mechanism investigations, mass spectrometric studies, diagnoses of drug metabolisms, and pharmaceutical discovery. Herein, we report an efficient hydrogen deuterium exchange reaction using deuterium oxide (D₂O) as the deuterium source, enabled by merging a tetra-n-butylammonium decatungstate (TBADT) hydrogen atom transfer photocatalyst and a thiol catalyst under light irradiation at 390 nm. This deuteration protocol is effective with formyl C–H bonds and a wide range of hydridic C(sp³)–H bonds (e.g. α-oxy, α-thioxy, α-amino, benzylic, and unactivated tertiary C(sp³)–H bonds). It has been successfully applied to the high incorporation of deuterium in 38 feedstock chemicals, 15 pharmaceutical compounds, and 6 drug precursors. Sequential deuteration between formyl C–H bonds of aldehydes and other activated hydridic C(sp³)–H bonds can be achieved in a selective manner.

A selective hydrogen deuterium exchange reaction with formyl C–H bonds and a wide range of hydridic C(sp³)–H bonds has been achieved by merging tetra-n-butylammonium decatungstate photocatalyst and a thiol catalyst under 390 nm light irradiation.     

合成甲醇的催化剂Rh-ZnO/MWNTs的研究

研究新型的由多壁碳纳米管(MWNTs)负载的， ZnO助催的铑基甲醇合成催化剂. 当铑含量达到4％(w)时，催化剂具有较高的比表面积(99.6 m2•g－1), 催化剂的反应活化能为68.8 kJ•mol－1.在563 K, 1 MPa下，催化剂的最高催化活性和甲醇选择性分别为411.4 mg/gcat.•h和96.7％. TEM、TPR和TPD等表征结果显示，碳纳米管能增加Rh在催化剂表面的分散度，提高催化剂的还原温度并能增加氢物种的吸附量，这些结果将有助于更好地了解催化剂中各组分间的协同作用和催化活性中心本质.     

Synthetic studies toward amphidinolide B1: synthesis of the C9-C26 fragment

[reaction: see text] The synthesis of the C9-C26 portion of amphidinolide B1 is described. A Fleming allylation followed by elimination was employed for the construction of the C13-C15 diene portion. Sharpless asymmetric dihydroxylation was utilized for regioselective functionalization of a styrene-derived alkene, in the presence of the C13-C15 diene functionality. A highly diastereoselective aldol reaction was developed to establish the C18 stereochemistry.     

Studies towards diarylheptanoid synthesis. Part 1: Synthesis and ring cleavage reactions of hexahydro-2H,5H-pyrano[2,3-b]pyran-2-ones

Lewis acid promoted anomeric substitution reactions of a stereoselectively prepared hexahydro-2H,5H-pyrano[2,3-b]pyran-2-one derivative was studied as a model for diarylheptanoid synthesis. Aromatic nucleophiles consistently provided the expected thermodynamic C-aryl pyranoside product.     

Characterization of framework and extra-framework aluminum species in non-hydrated zeolites Y by 27Al spin-echo, high-speed MAS, and MQMAS NMR spectroscopy at B0 = 9.4 to 17.6 T

27Al spin-echo, high-speed MAS (nu(rot) = 30 kHz), and MQMAS NMR spectroscopy in magnetic fields of B0 = 9.4, 14.1, and 17.6 T were applied for the study of aluminum species at framework and extra-framework positions in non-hydrated zeolites Y. Non-hydrated gamma-Al2O3 and non-hydrated aluminum-exchanged zeolite Y (Al,Na-Y) and zeolite H,Na-Y were utilized as reference materials. The solid-state 27Al NMR spectra of steamed zeolite deH,Na-Y/81.5 were found to consist of four signals. The broad low-field signal is caused by a superposition of the signals of framework aluminum atoms in the vicinity of bridging hydroxyl protons and framework aluminum atoms compensated in their negative charge by aluminum cations (delta(iso) = 70 +/- 10 ppm, C(QCC) = 15.0 +/- 1.0 MHz). The second signal is due to a superposition of the signals of framework aluminum atoms compensated by sodium cations and tetrahedrally coordinated aluminum atoms in neutral extra-framework aluminum oxide clusters (delta(iso) = 65 +/- 5 ppm, C(QCC) = 8.0 +/- 0.5 MHz). The residual two signals were attributed to aluminum cations (delta(iso) = 35 +/- 5 ppm, C(QCC) = 7.5 +/- 0.5 MHz) and octahedrally coordinated aluminum atoms in neutral extra-framework aluminum oxide clusters (delta(iso) = 10 +/- 5 ppm, C(QCC) = 5.0 +/- 0.5 MHz). By chemical analysis and evaluating the relative solid-state 27Al NMR intensities of the different signals of aluminum species occurring in zeolite deH,Na-Y/81.5 in the non-hydrated state, the aluminum distribution in this material was determined.     

Electron momentum spectroscopy of CF2Cl2: experimental and theoretical momentum profiles for outer valence orbitals

Electron momentum distributions for outer valence orbitals of CF2Cl2 have been obtained by (e,2e) electron momentum spectroscopy at an incident energy of 1200 eV + binding energy. The experimental electron momentum profiles are compared with Hartree-Fock and density functional theory (DFT) calculations using B3LYP hybrid functional with the 6-31G and 6-311+G* basis sets. Generally, the shapes of the experimental momentum profiles are well reproduced by DFT calculations using larger basis sets 6-311 + G*. An attempt has been made to clarify the ordering of the outer valence orbitals, which have been in controversy, by comparing experimental results with B3LYP/6-311 + G* calculations.     

New metalloligands [M(SC[O]Ph)(4)](-): synthesis and characterization of polymeric [A(MeCN)(x)[M(SC[O]Ph)(4)]] compounds (A = Li,Na and K; M = Ga and In; x = 0-2)

Exploiting the ability of the [M(SC[O]Ph)(4)](-) anion to behave like an anionic metalloligand, we have synthesized [Li[Ga(SC[O]Ph)(4)]] (1), [Li[In(SC[O]Ph)(4)]] (2), [Na[Ga(SC[O]Ph)(4)]] (3), [Na(MeCN)[In(SC[O]Ph)(4)]] (4), [K[Ga(SC[O]Ph)(4)]] (5), and [K(MeCN)(2)[In(SC[O]Ph)(4)]] (6) by reacting MX(3) and PhC[O]S(-)A(+) (M = Ga(III) and In(III); X = Cl(-) and NO(3)(-); and A = Li(I), Na(I), and K(I)) in the molar ratio 1:4. The structures of 2, 4, and 6 determined by X-ray crystallography indicate that they have a one-dimensional coordination polymeric structure, and structural variations may be attributed to the change in the alkali metal ion from Li(I) to Na(I) to K(I). Crystal data for 2 x 0.5MeCN x 0.25H(2)O: monoclinic space group C2/c, a = 24.5766(8) A, b = 13.2758(5) A, c = 19.9983(8) A, beta = 108.426(1) degrees, Z = 8, and V = 6190.4(4) A(3). Crystal data for 4: monoclinic space group P2(1)/c, a = 10.5774(7) A, b = 21.9723(15) A, c = 14.4196(10) A, beta = 110.121(1) degrees, Z = 4, and V = 3146.7(4) A(3). Crystal data for 6: monoclinic space group P2(1)/c, a = 12.307(3) A, b = 13.672(3) A, c = 20.575(4) A, beta = 92.356(4) degrees, Z = 4, and V = 3458.8(12) A(3). The thermal decomposition of these compounds indicated the formation of the corresponding AMS(2) materials.     

蛋白质组学和代谢组学在微生物代谢工程中的应用

构建微生物细胞工厂是化学品、生物能源以及药物分子可持续生产的可行性策略。然而，微生物的代谢复杂、调控严谨，制约着目标产物高效合成。蛋白质组学和代谢组学可以从系统生物学角度分析酶和代谢物组分，从而理解复杂的生物系统，为微生物代谢工程改造提供重要线索。该文介绍了蛋白质组学和代谢组学在微生物代谢工程中的应用，包括基因组尺度代谢模型构建、菌株生物合成优化、指导菌株耐受性改造、限速步骤预测、植物次级代谢途径挖掘，从而为微生物合成天然产物提供新的基因或途径。在此基础上，该文还展望了生物大数据未来的发展方向。     

“受阻路易斯酸碱对”催化的2,3-二取代2H-1,4-苯并噁嗪氢化反应机理研究

在受阻路易斯酸碱对（FLPs）催化的2，3-二取代2H-1，4-苯并噁嗪氢化反应中，3号位取代基不同会导致反应效率极大改变，因此我们选取反应活性具有较大差别的三种底物作为模型化合物对其反应机理进行了研究，建立了氢化反应势能面.发现当B（C₆F₅）₃与2，3-二苯基2H-1，4-苯并噁嗪或2-甲基-3-苯基2H-1，4-苯并噁嗪混合后，会形成FLPs与路易斯酸碱加合物的混合物.而将B（C₆F₅）₃与2，3-二甲基2H-1，4-苯并噁嗪混合后主要形成没有催化活性的路易斯酸碱加合物，因其能量低于FLPs，在催化体系中不容易转化为FLPs，这导致三种模型化合物在FLPs催化的氢化反应中效率不同.进一步的取代基电子效应及位阻效应计算表明：B（C₆F₅）₃与2-甲基-3-取代2H-1，4-苯并噁嗪混合后形成的路易斯酸碱加合物和FLPs化合物之间稳定性差别源于3位取代基空间位阻不同.