Statistical distribution based detector response function of a Si(PIN) detector for K_α and K_β X-ray

A semi-empirical detector response function (DRF) model of a Si (PIN) detector is proposed to fit element Kα and Kβ X-ray spectra, which is based on the statistical distribution analytic (SDA) method. The model for each single peak contains a step function, a Gaussian function, and an exponential tail function. Parameters in the model are obtained by the weighted nonlinear least-squares fitting method. In the application, six kinds of elements’ characteristic X-ray spectra are obtained by using the Si (PIN) detector, and fitted by the established DRF model. Reduced chi-square values are at the interval of 1.11-1.25. Other applications of the method are also discussed.     

YBCO线圈在液氮中的失超特性研究

由于高温超导材料的临界温度较高,可以运行在一个较宽的温度范围内,因此高温超导磁体被看作是稳定性较好的磁体,它在超导电力、超导磁体方面的应用占着日益重要的地位.YBCO带材作为第二代高温超导体的代表,近年来其生产工艺水平也得到了迅速发展和提高.磁体失超是影响超导磁体运行稳定性的重要问题之一.本文研究了YBCO单饼线圈在液氮环境中因由热扰动诱发的失超特性,设计了一套高温超导线圈在液氮浸泡下的失超测量系统,通过软件LABVIEW和数据采集卡对线圈的温度和电压进行采集和记录,测量YBCO单饼线圈在不同运行条件下的失超特性.     

用于质子交换膜材料的侧链型磺化聚芳醚酮砜的光谱分析

采用直接缩聚的方法,通过调整氨基单体用量,合成出了系列带有不同氨基含量的聚芳醚酮砜(Am-PAEKS)聚合物,在聚合物侧链上进行后磺化接枝制备出了系列不同磺化度的侧链型磺化聚芳醚酮砜(S-SPAEKS),并且通过调整磺酸基团含量来控制聚合物的磺化度。通过红外光谱(FTIR)和氢核磁谱(1HNMR),对所合成的单体及其聚合物的结构进行了表征,S-SPAEKS红外光谱在1 239和1 060 cm-1处出现了磺酸基团中OSO的特征吸收峰,氢核磁谱中1.64 ppm处出现了处于烷基链中间位置的两个氢(—CH₂—CH₂—)化学位移,证明得到了S-SPAEKS聚合物。经热失重分析发现,聚合物中磺酸基团的脱落温度都高于240 ℃,聚合物主链降解温度都高于450 ℃。研究表明,该系列聚合物具有良好的热性能,可以用作质子交换膜材料。     

编码光系统的颜色耦合与颜色失衡校正

为了减小编码光系统中的颜色耦合与颜色失衡的干扰,提高形状与颜色重建的准确度,建立了彩色编码光系统,并对其所采用的编解码方法、颜色重建的两个相关环节及颜色校正方法进行了研究。首先,给出了系统的彩色梯形相移强度比编解码法,分析了编解码过程中存在的RGB基色相互耦合现象,设计了应用Caspi模型硬件标定的颜色耦合校正方案;然后,给出了系统的逐点颜色重建法,分析了颜色重建过程中由表面曲率导致的颜色失衡现象,设计了利用表面几何信息校正颜色失衡的方案。实验结果表明：校正后单一绿色图像中的红色分量值约为校正前的1/10;单色表面色差约为0.1,趋近于人眼颜色分辨率,远低于校正前的0.4;重建的单色复杂被测表面颜色均匀、视觉效果良好,符合实际情况。提出的方法符合编码光系统抗干扰能力强的要求,有助于提高形状与颜色重建的准确度。     

HL-2A װ��MW ������������ϵͳ��˿��Դ�����������

The main circuit topology, control hardware and control sequence of the cathode filament power supply for the HL-2A neutral beam heating system was introduced. Feedback control simulation of main circuit of filament power supply is carried out through MATLAB simulation software. It is found that the ripple factor is about 1%when the current is about 1000A, and the ripple coefficient increases to 3% when the current drops to 200A. Without the AC filter reactor in series L₁ and parallel harmonic filter LC in the low level control cabinet, the output current ripple coefficient becomes larger obviously. It shows that L₁ and LC not only absorb harmonic current, but also filter the chopper waveform after AC voltage regulation to make the output waveform smoother.     

柚皮素7-O-葡萄糖苷非对映异构体的NMR波谱分析

二氢黄酮糖苷化后产生的R与S构型非对映异构体在¹H NMR谱上会呈现一些差别,但文献对其差别描述非常有限.为便于利用¹H NMR谱图判断二氢黄酮糖苷的R与S构型非对映异构体,本文首先在植物药皂荚提取物中分离得到一种二氢黄酮苷-柚皮素7-O-葡萄糖苷R与S构型混合物,分析其氘代二甲亚砜（DMSO-d₆）溶液的¹H NMR、¹³C NMR、¹H-¹H COSY、¹H-¹³C HSQC和¹H-¹³C HMBC谱,对其¹H和¹³C NMR谱峰进行了归属;然后,采用手性色谱柱对该混合物进行分离,结合圆二色光谱（CD）技术确定构型;最后,为鉴别R与S构型柚皮素7-O-葡萄糖苷在¹H NMR谱中特征差别谱峰,避免葡萄糖残基质子对二氢黄酮苷元质子化学位移的影响,采集了R与S构型柚皮素7-O-葡萄糖苷及其混合物氘代乙腈（CD₃CN）溶液的NMR谱,结果显示葡萄糖残基端基质子H-1″化学位移差别最为明显,为9.4 Hz;5-位酚羟基质子化学位移差别为5.8 Hz,C环上3个质子化学位移差也较明显．     

Phase transition and pitting corrosion behaviour for Mo—implanted aluminium

Molybdenum ions are implanted into aluminium with high ion flux and high dose at elevated temperatures of 200℃, 400℃ and 500℃. Due to the high temperature and high flux of vacancies and interstitial atoms, the atom diffusion and chemical effects are enhanced during the ion implantation. The effects increase with increasing ion flux and dose, so that new phase formation and phase transition emerge noticeably. X-ray diffraction analysis shows that when the aluminium is implanted with Mo ions at a low ion flux (25μA/cm²), the Al₅Mo alloy is formed. The atomic ratio of Mo/Al of the Al₅Mo phase is close to 20%. When the aluminium is implanted with Mo ions at a high ion flux (50μA/cm²), the phase transition from Al₅Mo to Al₁₂Mo appears, and the latter is dominant, which is determined to be the final phase. The ratio of Mo/Al in Al₁₂Mo is 7.7%. Rutherford backscattering spectroscopy indicates also that the Mo/Al atom ratio is ～7% to ～8% in Mo-implanted aluminium. The atomic ratios of the constituents in Al₅Mo and Al₁₂Mo are of stoichiometric composition for these alloys. The thicknesses of the Al₁₂Mo alloy layers for Mo-implanted Al with ion doses of 3×10¹⁷/cm² and 1×10¹⁸/cm² are 550nm and 2000nm, respectively. The pitting corrosion potential V_p increases obviously. It is clear that due to the formation of Al₁₂Mo alloy layer, the pitting corrosion resistance is enhanced.     

威灵仙及其伪品的FTIR法直接鉴定

采用傅里叶变换红外光谱（FTIR）法，借助OMNI采样器直接测定了中药材威灵仙及其伪品华东菝葜、山木通和毛柱铁线莲的红外光谱，结果发现正伪品的红餐光谱差别较大。因此FTIR法可以直接、快速、准确地对威灵仙与其伪品华东菝葜、山木通和毛柱铁线莲进行区别鉴定。     

C_(60)衍生物分子的拉曼光谱研究

本文通过对C6 0 衍生物拉曼光谱的研究发现 ,由于有机官能团的出现使得C6 0 分子的结构发生了变化 ,从而导致C6 0 衍生物的拉曼光谱有了明显不同。本文对此现象进行了分析与解释。     

在线原麦汁浓度检测仪

原麦汁浓度是啤酒生产过程中的一项重要指标。溶液的折射率是其浓度的函数 ,全反射的临界角与其浓度之间有一一对应关系。利用线阵CCD做为高精度探测器件 ,检测全反射临界角的变化 ,可测量溶液的浓度。临界角的变化与电源的波动及光源的强度变化等因素无关 ,并且溶液中的固体颗粒、小气泡等不影响检测精度。研制了一种在线检测原麦汁浓度的测试仪器 ,介绍了仪器的光学结构及数据处理方法。现场测量精度为± 0 1(以浓度表示)