Compact Single-Stage Femtosecond Multipass Ti：Sapphire Amplifier at 1 kHz with High Beam Quality

A compact femtosecond Ti：sapphire amplifier system is reported using single-stage multipass configuration with high beam quality. A high dispersion glass stretcher and a pair of double prisms for compression are introduced based on broadband femtosecond seed pulses. The non-grating-based pulse stretcher and compressor are advantageous to increase high beam quality and to reduce the high-order dispersion. A Gaussian filter is used to reduce the gain narrowing effect in amplification. The compact femtosecond Ti：sapphire nine-pass amplifier delivers pulses with a duration of 26 fs and an energy of 800μJ at 7mJ pumping pulses energy at I kHz. The 1-kHz femtosecond amplifier with high beam quality and high stability is very suitable for ultrafast physics research applications, such as attosecond science, ultra-precision micromachining, and THz wave generation.     

三维Minkowski空间中的曲面及其可积性

利用可积系统的思想,借助三维Minkowski空间L3的矩阵模型,研究了L3中具有调和逆平均曲率的类空曲面和洛伦兹调和逆平均曲率类时曲面的可积性及其形变.     

有限体积KFVS方法在二维溃坝中的应用

本文采用了基于KFVS格式的有限体积方法 (FVM)求解了控制水流运动的二维浅水方程 ,建立了二维水坝瞬间溃坝的洪水演进模型 .并应用此模型模拟了二维非对称溃坝和对称溃坝情形下坝左下角有障碍物时的洪水波演进过程 .模拟结果表明该数学模型对二维浅水运动的模拟很有效 .     

三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。     

灰色Verhulst模型的样条插值函数的残差修正

本用样条函数对灰色Verhulst模型的残差序列进行插值拟合，然后作用于二阶线性微分方程，并以此修正原模型，得到一种新的预测模型的数值解，提高了拟合的精确度。     

承受拉-扭组合载荷的薄壁圆筒屈服时产生塑性流动的条件

提出了在无外力作功的情况下，具有Bauschinger效应的弹塑性材料处于屈服状态产生自发的塑性流动时应满足的条件．这个条件不仅与材料的力学性能有关，而且还处决于材料的具体的载荷边界条件和变形．举例说明了承受拉一扭组合的薄壁圆筒中，采用组合强化模型时，产生塑性流动的具体条件．     

The optical near-field speckles and their first order statistics on the basis of the integral equations of electromagnetic field

Speckle fields are the random light wave distributions produced when the light fields are scattered from random surfaces or a random medium. They appear in many optical phenomena that are related to light propagations[1,2] and have found wide appli-cations in a variety of scientific and technical fields. The examples of the recent impor-tant applications of speckles include the analysis of the movement of the granules[3], the three-dimensional imaging for the microstructures of metal nanocryst…     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

用电泳技术制备YBCO高温超导厚膜

介绍了电泳技术制备YBCO高温超导厚膜的实验方法和YBCO高温超导厚膜的电学性质测量 ,讨论了在学生小型科研实验或设计实验中开展此实验的学时安排、注意事项和实验内容的扩展 .     

白光干涉条纹变密的原因探讨

讨论了在测定透明介质折射率的过程中彩色条纹变密的现象，并在其基础上分析其成因：一是由于媒质折射率加大；二是由于平形板介质平行度不好造成楔形的倾角变大，最后在实验中验证了理论结果。